Optimal Topological Design of 3D Continuum Structures for Crashworthiness. There is a widespread need throughout the Australian transport, defence and construction industries for high performance energy absorption devices. Data from the Australian Transport Safety Bureau show that in 2002 there were 1,715 people killed in 1,525 crashes in Australia. The proposed research will develop advanced techniques for improving crashworthiness of vehicles, roadside barriers and other energy absorption devi ....Optimal Topological Design of 3D Continuum Structures for Crashworthiness. There is a widespread need throughout the Australian transport, defence and construction industries for high performance energy absorption devices. Data from the Australian Transport Safety Bureau show that in 2002 there were 1,715 people killed in 1,525 crashes in Australia. The proposed research will develop advanced techniques for improving crashworthiness of vehicles, roadside barriers and other energy absorption devices. This will lead to significant reductions in injury to people and damage to structures caused by impact; and thus substantial savings for the nation from the enormous costs associated with the fatalities, injuries and structural damages. Read moreRead less
Shape adaptive structures with built-in compact smart material based actuators. Primary Australian aerospace manufacturers are sub-contractors and constantly compete in the global market. Their products are primarily control surfaces, e.g., Boeing 757 and 777 rudders, 737 Krueger flaps. In light of the development of the hingeless control surfaces (HCS) in the smart aircraft wing program in the USA, the economic benefits of this project are very high because (a) it will address the key technolo ....Shape adaptive structures with built-in compact smart material based actuators. Primary Australian aerospace manufacturers are sub-contractors and constantly compete in the global market. Their products are primarily control surfaces, e.g., Boeing 757 and 777 rudders, 737 Krueger flaps. In light of the development of the hingeless control surfaces (HCS) in the smart aircraft wing program in the USA, the economic benefits of this project are very high because (a) it will address the key technological issue identified in the HCS program; and (b) it will enhance Australian manufacturers¡¯ technological standing and input in the design and manufacturing of next generation HCS by providing highly trained people with world-leading niche technology.Read moreRead less
Active shape control of large thin-walled structures using ferroelectric single crystals. Ferroelectric single crystals were invented 5 years ago, and they possess many superior properties compared to conventional piezoelectric materials, particularly the induced strain up to 1.5%, an order higher than conventional materials. This project aims to poineer the application of these new and powerful smart materials as actuators and sensors to shape control of smart structures. The expected outcome ....Active shape control of large thin-walled structures using ferroelectric single crystals. Ferroelectric single crystals were invented 5 years ago, and they possess many superior properties compared to conventional piezoelectric materials, particularly the induced strain up to 1.5%, an order higher than conventional materials. This project aims to poineer the application of these new and powerful smart materials as actuators and sensors to shape control of smart structures. The expected outcomes are (a) a new constitutive theory for the non-linear behaviour of ferroelectric single crystals; (b) a novel definition and formulation for the shape control problem; and (c) an innovative theoretical framework for design optimization of shape control of smart structures using ferroelectric single crystals.Read moreRead less
Morphing flexible structures with lead lanthanum zirconium titanate (PLZT) based optical actuators. Lead lanthanum zirconate titanate (PLZT) materials yield mechanical strains when exposed to near ultraviolet light as a result of combined photovoltaic and converse piezoelectric effects. They offer actuation strain on par with piezoelectric materials and other advantages, such as wireless light-to-mechanical energy transfer, immunity from electrical and magnetic disturbances and fast response wi ....Morphing flexible structures with lead lanthanum zirconium titanate (PLZT) based optical actuators. Lead lanthanum zirconate titanate (PLZT) materials yield mechanical strains when exposed to near ultraviolet light as a result of combined photovoltaic and converse piezoelectric effects. They offer actuation strain on par with piezoelectric materials and other advantages, such as wireless light-to-mechanical energy transfer, immunity from electrical and magnetic disturbances and fast response with the transparent electrode design. This project aims to pioneer the application of PLZT optical actuators in morphing flexible structures leading to development of wireless smart structures technology and opt-electromechanical systems such as medical instruments.Read moreRead less
Light steel roof and wall systems under combined wind and bushfire actions. The project aims to investigate the complex behaviour of light cold-formed-steel roof and wall systems involving localized failures under the combined action of wind and bushfire using wind suction tests at elevated temperatures combined with advanced numerical modelling. It will generate new knowledge of the behaviour and strength of cold-formed-steel roof and wall systems under bushfire conditions. Expected outcomes in ....Light steel roof and wall systems under combined wind and bushfire actions. The project aims to investigate the complex behaviour of light cold-formed-steel roof and wall systems involving localized failures under the combined action of wind and bushfire using wind suction tests at elevated temperatures combined with advanced numerical modelling. It will generate new knowledge of the behaviour and strength of cold-formed-steel roof and wall systems under bushfire conditions. Expected outcomes include new design models for wind, bushfire and cold-formed-steel Standards. This will significantly improve the bushfire safety of buildings, since non-combustible steel roof and wall systems are used as building envelopes in bushfire prone areas, but are not designed to withstand recently discovered bushfire-enhanced winds.Read moreRead less
High Strength Steel Protection Bollards. Terrorist attacks cost Australians much human grief and millions of dollars. Prevention of an attack is paramount. Passive road bollards are commonly used to stop a vehicle approaching and/or entering security sensitive infrastructure. Thin-walled tubes are used to manufacture such bollards. However there is a lack of knowledge about their behaviour, and in particular high strength alloy steel bollards, when subjected to impact loads. The investigators wi ....High Strength Steel Protection Bollards. Terrorist attacks cost Australians much human grief and millions of dollars. Prevention of an attack is paramount. Passive road bollards are commonly used to stop a vehicle approaching and/or entering security sensitive infrastructure. Thin-walled tubes are used to manufacture such bollards. However there is a lack of knowledge about their behaviour, and in particular high strength alloy steel bollards, when subjected to impact loads. The investigators will apply their extensive knowledge in thin-walled tubular structures to establish the most economical means of designing high strength bollards. This knowledge will be transferred into design standards and Australia's limited defence resources.Read moreRead less
Controlled vibration of intelligent super-lightweight structure systems. This project aims to poineer research on dynamic shape control of intelligent structure systems, in which the rapid shape variation of a structure is controlled with fast varying electric energy. It bridges the gap between structural shape and vibration control. The expected outcomes are (a) novel concepts and formulation of dynamic shape control; (b) biologically inspired active stiffener system; and (c) an innovative th ....Controlled vibration of intelligent super-lightweight structure systems. This project aims to poineer research on dynamic shape control of intelligent structure systems, in which the rapid shape variation of a structure is controlled with fast varying electric energy. It bridges the gap between structural shape and vibration control. The expected outcomes are (a) novel concepts and formulation of dynamic shape control; (b) biologically inspired active stiffener system; and (c) an innovative theoretical framework for design optimization of dynamic shape control of intelligent structure systems.
Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0775656
Funder
Australian Research Council
Funding Amount
$490,000.00
Summary
High Rate Testing System for Materials and Structures. Human or natural disasters such as terrorist attack or tsunami take place and they have catastrophic consequences, in terms of fatalities and psyche of fear among the population, as well as enormous financial loss. Vehicle accident is another example. In Australia, 1636 people were killed in 1481 road crashes, in 2005 alone. There is a great demand for research into devising novel materials and structures for optimum performance under such c ....High Rate Testing System for Materials and Structures. Human or natural disasters such as terrorist attack or tsunami take place and they have catastrophic consequences, in terms of fatalities and psyche of fear among the population, as well as enormous financial loss. Vehicle accident is another example. In Australia, 1636 people were killed in 1481 road crashes, in 2005 alone. There is a great demand for research into devising novel materials and structures for optimum performance under such circumstances. The proposed new high rate testing system will significantly advance research in this area. The facility will directly support a range of research projects in material and structural design in military and civil vehicles, aerospace industry and defence.Read moreRead less
Direct strength method of design of simple and complex thin-walled shapes for combined actions. The Direct Strength Method project will allow structural design engineers, and companies manufacturing cold-formed steel building products to innovate more widely. It will enhance the Australian and American standards for cold-formed steel design improving safety in building structures.
Design of Welded Steel Tubular Connections. Steel tubes are widely used in building, road transportation, defence, recreation, and agriculture industries. The proposed program will develop static design procedures for welded tubular connections to ensure safe and economic structures. The program will also investigate the behaviour of a popular tubular connection utilizing very high strength steel tubes to extend the existing design scope and enhance the utilization of Australian produced innovat ....Design of Welded Steel Tubular Connections. Steel tubes are widely used in building, road transportation, defence, recreation, and agriculture industries. The proposed program will develop static design procedures for welded tubular connections to ensure safe and economic structures. The program will also investigate the behaviour of a popular tubular connection utilizing very high strength steel tubes to extend the existing design scope and enhance the utilization of Australian produced innovative tubular sections. The notch toughness of steel tubes will also be investigated to avoid fracture failure of welded connections under dynamic loading. The program will build strong ongoing collaboration between University of Toronto and Monash University.Read moreRead less