Development of modal control systems for adaptive optics. This project will develop a simple, robust and low-cost modal servo system for dynamic control and correction of the propagation and focussing properties of light beams. This new system will incorporate a novel optical sensor, which will be developed in this project, and a new optical corrector being developed at the University of Durham. Currently available astronomical adaptive-optics systems have produced excellent results but are expe ....Development of modal control systems for adaptive optics. This project will develop a simple, robust and low-cost modal servo system for dynamic control and correction of the propagation and focussing properties of light beams. This new system will incorporate a novel optical sensor, which will be developed in this project, and a new optical corrector being developed at the University of Durham. Currently available astronomical adaptive-optics systems have produced excellent results but are expensive and complicated. A low-cost alternative will dramatically increase the use of adaptive optics in industrial, environmental and medical applications. The compensation of distortions in low-cost optical atmospheric sensors will be demonstrated.Read moreRead less
MICROWAVE SENSORS BASED ON MULTI-LAYER MICROSTRIP PATCH RESONATORS AND LINE RESONATORS. Inexpensive, easy-to-use, accurate, sensitive and compact sensor systems are needed to improve the quality of many agricultural and industrial products. For example, edible oil industry needs such a system to determine the water content in the seeds used for edible oil. Similarly, the measurement of moisture content is crucial for quality control and grading of industrial oils, paints, health products and man ....MICROWAVE SENSORS BASED ON MULTI-LAYER MICROSTRIP PATCH RESONATORS AND LINE RESONATORS. Inexpensive, easy-to-use, accurate, sensitive and compact sensor systems are needed to improve the quality of many agricultural and industrial products. For example, edible oil industry needs such a system to determine the water content in the seeds used for edible oil. Similarly, the measurement of moisture content is crucial for quality control and grading of industrial oils, paints, health products and many industrial sheets. We develop novel microwave sensor systems, based on multi-layer microstrip resonators, for such measurements of materials in the form of sheets, pastes, liquids or powders. They are also attractive for scientific applications such as monitoring the doping concentration of semiconductor materials.Read moreRead less
Analysis, Optimization, and Control of Scanning Atomic Force Microscope Micro-Cantilever Probes. Atomic Force Microscopes (AFM's) are widely used for the examination of samples smaller than can be observed with an optical microscope. A tiny 'finger', only a few atoms wide at its sharpest point, is used to 'feel' the surface of a sample. This project aims to increase the resolution of AFM images by actively controlling the sensor probe dynamics.
Better quality AFM images would allow scientists ....Analysis, Optimization, and Control of Scanning Atomic Force Microscope Micro-Cantilever Probes. Atomic Force Microscopes (AFM's) are widely used for the examination of samples smaller than can be observed with an optical microscope. A tiny 'finger', only a few atoms wide at its sharpest point, is used to 'feel' the surface of a sample. This project aims to increase the resolution of AFM images by actively controlling the sensor probe dynamics.
Better quality AFM images would allow scientists to further investigate the atomic and molecular structure of such samples as: metals, polymers, cells, and proteins.
This research will contribute to the design of an Australian made Scanning Probe Microscope. Development of local expertise will provide a valuable resource for Australian scientific and industrial research.
Read moreRead less
Microfibre photonics: function densification on a wavelength scale. The project will contribute to Australia's nanoscale device research and nanomanufacturing development. The project will create microfibre fabrication technologies for the creation of new optical systems of miniature proportions that will be used for cell illumination, for the creation of sensors for detection in small environments and as light tools for fundamental experiments in physics. Specialist fabrication methods will be ....Microfibre photonics: function densification on a wavelength scale. The project will contribute to Australia's nanoscale device research and nanomanufacturing development. The project will create microfibre fabrication technologies for the creation of new optical systems of miniature proportions that will be used for cell illumination, for the creation of sensors for detection in small environments and as light tools for fundamental experiments in physics. Specialist fabrication methods will be developed that will add to the nation's skill base. The outcomes of the project will enhance Australia's knowledge capacity, research capability and will contribute significantly to each of the National Research Priorities.Read moreRead less
Inhomogeneous tissue conductivity influence on the forward and inverse electroencephalogram problems in realistic head models. The brain dysfunction indicators have been extremely difficult to obtain, largely because many disorders of higher brain function reflect abnormalities of brain function rather than apparent brain structure. The neuronal generator localization and identification in this project will provide complementary information about source and timing of neural activities sub-servin ....Inhomogeneous tissue conductivity influence on the forward and inverse electroencephalogram problems in realistic head models. The brain dysfunction indicators have been extremely difficult to obtain, largely because many disorders of higher brain function reflect abnormalities of brain function rather than apparent brain structure. The neuronal generator localization and identification in this project will provide complementary information about source and timing of neural activities sub-serving higher brain function and form sequences of spatial-temporal brain activity image. That will enable the information from MRI, which has a good spatial but poor temporal resolution, and the information from EEG, which has a high temporal resolution on the scalp, to be combined to provide clinical psychologists and brain researchers a more efficient diagnostic tool.Read moreRead less
Robust Control and System Identification of Highly Resonant Systems. The modelling and control of complex and highly resonant systems is of increasing engineering importance due to their occurence in a wide variety of emerging areas in aerospace, acoustics, robotics and ``smart'' structures. At the same time, effective tools tailored towards identifying the necessary models, and synthesising the necessary controllers for these systems are in their infancy. This arises from special difficulties ....Robust Control and System Identification of Highly Resonant Systems. The modelling and control of complex and highly resonant systems is of increasing engineering importance due to their occurence in a wide variety of emerging areas in aerospace, acoustics, robotics and ``smart'' structures. At the same time, effective tools tailored towards identifying the necessary models, and synthesising the necessary controllers for these systems are in their infancy. This arises from special difficulties encountered via the high dimensionality of the structures involved. This research project will employ new methods from the fields of robust control and multivariable system identification theory to lead to new and high performance solutions in this area.Read moreRead less
Comparison of Techniques for the Removal of Ocular Artefact from the Electroencephalogram: A Validation Study. Although employed extensively for both research and clinical purposes, the utility of the electroencephalograph (EEG) is hampered by the contaminating effects of eye movements on these 'brain waves'. If it can be validated, the recent Australian development of a solution to this problem will mean that the EEG can be measured more quickly and accurately. This purpose of this research is ....Comparison of Techniques for the Removal of Ocular Artefact from the Electroencephalogram: A Validation Study. Although employed extensively for both research and clinical purposes, the utility of the electroencephalograph (EEG) is hampered by the contaminating effects of eye movements on these 'brain waves'. If it can be validated, the recent Australian development of a solution to this problem will mean that the EEG can be measured more quickly and accurately. This purpose of this research is to perform this validation, and its success would mean both more efficient EEG recording for the country, as well as an enhanced scientific reputation.Read moreRead less
Biomedical imaging with spins in nanoparticles: from single cell to whole-body scanning. The engineering of new biomedical technology is critical in underpinning our understanding of physiology and in the early detection of disease. This project will construct novel instrumentation for investigating normal and diseased physiology using bioagents based on diamond and ruby nanoparticles. The imaging and tracking techniques proposed are non-invasive, nontoxic, and provide high-resolution access to ....Biomedical imaging with spins in nanoparticles: from single cell to whole-body scanning. The engineering of new biomedical technology is critical in underpinning our understanding of physiology and in the early detection of disease. This project will construct novel instrumentation for investigating normal and diseased physiology using bioagents based on diamond and ruby nanoparticles. The imaging and tracking techniques proposed are non-invasive, nontoxic, and provide high-resolution access to specific physiological interactions of paramount importance in, for instance, understanding cancer pathways and developing strategies for targeted drug delivery.Read moreRead less
Manipulation of Biological Particles Using Dielectrophoresis. Dielectrophoretic manipulation and separation of particles has numerous biological and medical applications, e.g. identification and characterisation of individual cells, purification of cell subpopulations from mixture suspensions, etc. This research project aims to develop a high-efficiency and low-cost DEP device for bio-particle manipulation. It will contribute significantly to the advancements in the field of biological Micro-Ele ....Manipulation of Biological Particles Using Dielectrophoresis. Dielectrophoretic manipulation and separation of particles has numerous biological and medical applications, e.g. identification and characterisation of individual cells, purification of cell subpopulations from mixture suspensions, etc. This research project aims to develop a high-efficiency and low-cost DEP device for bio-particle manipulation. It will contribute significantly to the advancements in the field of biological Micro-Electrical-Mechanical-Systems (MEMS) and nanotechnology. Industry will benefit from the expertise on micro/nano-structures and micro/nano-manufacturing achieved by this project.Read moreRead less
Fibre Bragg grating microstructures: a novel sensing tool? This project seeks to produce novel optical fibre sensors based on in-fibre Bragg gratings that will find applications in the measurement of transverse strain. The development of improved measurement techniques provides for better monitoring of industrial processes that will provide greater efficiency and safety, and thereby significant annual cost savings and improved safety.