Development of modal control systems for adaptive optics. This project will develop a simple, robust and low-cost modal servo system for dynamic control and correction of the propagation and focussing properties of light beams. This new system will incorporate a novel optical sensor, which will be developed in this project, and a new optical corrector being developed at the University of Durham. Currently available astronomical adaptive-optics systems have produced excellent results but are expe ....Development of modal control systems for adaptive optics. This project will develop a simple, robust and low-cost modal servo system for dynamic control and correction of the propagation and focussing properties of light beams. This new system will incorporate a novel optical sensor, which will be developed in this project, and a new optical corrector being developed at the University of Durham. Currently available astronomical adaptive-optics systems have produced excellent results but are expensive and complicated. A low-cost alternative will dramatically increase the use of adaptive optics in industrial, environmental and medical applications. The compensation of distortions in low-cost optical atmospheric sensors will be demonstrated.Read moreRead less
Analysis, Optimization, and Control of Scanning Atomic Force Microscope Micro-Cantilever Probes. Atomic Force Microscopes (AFM's) are widely used for the examination of samples smaller than can be observed with an optical microscope. A tiny 'finger', only a few atoms wide at its sharpest point, is used to 'feel' the surface of a sample. This project aims to increase the resolution of AFM images by actively controlling the sensor probe dynamics.
Better quality AFM images would allow scientists ....Analysis, Optimization, and Control of Scanning Atomic Force Microscope Micro-Cantilever Probes. Atomic Force Microscopes (AFM's) are widely used for the examination of samples smaller than can be observed with an optical microscope. A tiny 'finger', only a few atoms wide at its sharpest point, is used to 'feel' the surface of a sample. This project aims to increase the resolution of AFM images by actively controlling the sensor probe dynamics.
Better quality AFM images would allow scientists to further investigate the atomic and molecular structure of such samples as: metals, polymers, cells, and proteins.
This research will contribute to the design of an Australian made Scanning Probe Microscope. Development of local expertise will provide a valuable resource for Australian scientific and industrial research.
Read moreRead less
Microfibre photonics: function densification on a wavelength scale. The project will contribute to Australia's nanoscale device research and nanomanufacturing development. The project will create microfibre fabrication technologies for the creation of new optical systems of miniature proportions that will be used for cell illumination, for the creation of sensors for detection in small environments and as light tools for fundamental experiments in physics. Specialist fabrication methods will be ....Microfibre photonics: function densification on a wavelength scale. The project will contribute to Australia's nanoscale device research and nanomanufacturing development. The project will create microfibre fabrication technologies for the creation of new optical systems of miniature proportions that will be used for cell illumination, for the creation of sensors for detection in small environments and as light tools for fundamental experiments in physics. Specialist fabrication methods will be developed that will add to the nation's skill base. The outcomes of the project will enhance Australia's knowledge capacity, research capability and will contribute significantly to each of the National Research Priorities.Read moreRead less
Inhomogeneous tissue conductivity influence on the forward and inverse electroencephalogram problems in realistic head models. The brain dysfunction indicators have been extremely difficult to obtain, largely because many disorders of higher brain function reflect abnormalities of brain function rather than apparent brain structure. The neuronal generator localization and identification in this project will provide complementary information about source and timing of neural activities sub-servin ....Inhomogeneous tissue conductivity influence on the forward and inverse electroencephalogram problems in realistic head models. The brain dysfunction indicators have been extremely difficult to obtain, largely because many disorders of higher brain function reflect abnormalities of brain function rather than apparent brain structure. The neuronal generator localization and identification in this project will provide complementary information about source and timing of neural activities sub-serving higher brain function and form sequences of spatial-temporal brain activity image. That will enable the information from MRI, which has a good spatial but poor temporal resolution, and the information from EEG, which has a high temporal resolution on the scalp, to be combined to provide clinical psychologists and brain researchers a more efficient diagnostic tool.Read moreRead less
Comparison of Techniques for the Removal of Ocular Artefact from the Electroencephalogram: A Validation Study. Although employed extensively for both research and clinical purposes, the utility of the electroencephalograph (EEG) is hampered by the contaminating effects of eye movements on these 'brain waves'. If it can be validated, the recent Australian development of a solution to this problem will mean that the EEG can be measured more quickly and accurately. This purpose of this research is ....Comparison of Techniques for the Removal of Ocular Artefact from the Electroencephalogram: A Validation Study. Although employed extensively for both research and clinical purposes, the utility of the electroencephalograph (EEG) is hampered by the contaminating effects of eye movements on these 'brain waves'. If it can be validated, the recent Australian development of a solution to this problem will mean that the EEG can be measured more quickly and accurately. This purpose of this research is to perform this validation, and its success would mean both more efficient EEG recording for the country, as well as an enhanced scientific reputation.Read moreRead less
Biomedical imaging with spins in nanoparticles: from single cell to whole-body scanning. The engineering of new biomedical technology is critical in underpinning our understanding of physiology and in the early detection of disease. This project will construct novel instrumentation for investigating normal and diseased physiology using bioagents based on diamond and ruby nanoparticles. The imaging and tracking techniques proposed are non-invasive, nontoxic, and provide high-resolution access to ....Biomedical imaging with spins in nanoparticles: from single cell to whole-body scanning. The engineering of new biomedical technology is critical in underpinning our understanding of physiology and in the early detection of disease. This project will construct novel instrumentation for investigating normal and diseased physiology using bioagents based on diamond and ruby nanoparticles. The imaging and tracking techniques proposed are non-invasive, nontoxic, and provide high-resolution access to specific physiological interactions of paramount importance in, for instance, understanding cancer pathways and developing strategies for targeted drug delivery.Read moreRead less
Manipulation of Biological Particles Using Dielectrophoresis. Dielectrophoretic manipulation and separation of particles has numerous biological and medical applications, e.g. identification and characterisation of individual cells, purification of cell subpopulations from mixture suspensions, etc. This research project aims to develop a high-efficiency and low-cost DEP device for bio-particle manipulation. It will contribute significantly to the advancements in the field of biological Micro-Ele ....Manipulation of Biological Particles Using Dielectrophoresis. Dielectrophoretic manipulation and separation of particles has numerous biological and medical applications, e.g. identification and characterisation of individual cells, purification of cell subpopulations from mixture suspensions, etc. This research project aims to develop a high-efficiency and low-cost DEP device for bio-particle manipulation. It will contribute significantly to the advancements in the field of biological Micro-Electrical-Mechanical-Systems (MEMS) and nanotechnology. Industry will benefit from the expertise on micro/nano-structures and micro/nano-manufacturing achieved by this project.Read moreRead less
DROP DEFORMATION IN CONFINED MICROFLUIDIC GEOMETRIES. Increasingly, high technology applications in biotechnology and microtechnology industries need to process complex (non-Newtonian) fluids with dispersed particles/droplets in channels as small as several microns (microfluidics). A computational fluid dynamic model of non-Newtonian droplet deformation in microfluidic geometries will be developed, and validated using experimental measurements of the flow field in this project. The aim is to und ....DROP DEFORMATION IN CONFINED MICROFLUIDIC GEOMETRIES. Increasingly, high technology applications in biotechnology and microtechnology industries need to process complex (non-Newtonian) fluids with dispersed particles/droplets in channels as small as several microns (microfluidics). A computational fluid dynamic model of non-Newtonian droplet deformation in microfluidic geometries will be developed, and validated using experimental measurements of the flow field in this project. The aim is to understand and quantify factors influencing droplet deformation. Coupling non-Newtonian characteristics with microfluidic geometries will allow the continuous manufacture of micro-particles of specified size and shape for existing and new applications, and will provide guidance for further extending the process to nano-particle manufacture.Read moreRead less
Electro-viscous effects on pressure-driven liquid flow in microchannels. Australian biotechnology, information technology and food technology industries will benefit from the development of new tailored micro- and nano-fluidic devices for processing of non-Newtonian fluids. The efficiency of functional elements such as valves, pumps, mixers, reactors, heat exchangers can be optimised for specific fluids by understanding the coupling between the fluid properties, the device geometry, surface cha ....Electro-viscous effects on pressure-driven liquid flow in microchannels. Australian biotechnology, information technology and food technology industries will benefit from the development of new tailored micro- and nano-fluidic devices for processing of non-Newtonian fluids. The efficiency of functional elements such as valves, pumps, mixers, reactors, heat exchangers can be optimised for specific fluids by understanding the coupling between the fluid properties, the device geometry, surface charge, and the numerical predictions. This understanding will complement development in related projects on non-Newtonian drop and particle formation in microfluidic flows which envisage continuous particle manufacture for novel materials possessing programmable, enhanced functional properties.Read moreRead less
Passively switched mid-infrared fibre lasers using saturable absorbers placed internally or externally to the geometry of the fibre. This project will create new pulsed mid-infrared fibre lasers based on original and recently developed passive switching techniques. An original class of fibre laser systems will be shown that is based on the internal placement of saturable absorbers within the optical fibre itself. A configuration such as this will enable the production of very simple pulsed laser ....Passively switched mid-infrared fibre lasers using saturable absorbers placed internally or externally to the geometry of the fibre. This project will create new pulsed mid-infrared fibre lasers based on original and recently developed passive switching techniques. An original class of fibre laser systems will be shown that is based on the internal placement of saturable absorbers within the optical fibre itself. A configuration such as this will enable the production of very simple pulsed laser systems of high efficiency and potentially high power. This will lead into the development of practical pulsed oscillator systems the output of which can be used directly or optically amplified for applications requiring high power.Read moreRead less