Diamond lasers for precision applications. Diamond lasers for precision applications. The project aims to create single mode lasers of ultrahigh spectral brightness. Single-mode lasers could improve many areas of science and technology, but existing technologies do not meet all performance requirements. This project will harness the intrinsic properties of diamond Raman lasers to increase the wavelength reach, power and stability of single mode lasers. The expected outcome is laser technology th ....Diamond lasers for precision applications. Diamond lasers for precision applications. The project aims to create single mode lasers of ultrahigh spectral brightness. Single-mode lasers could improve many areas of science and technology, but existing technologies do not meet all performance requirements. This project will harness the intrinsic properties of diamond Raman lasers to increase the wavelength reach, power and stability of single mode lasers. The expected outcome is laser technology that satisfies the needs of emerging markets, for example in gas sensing and atom cooling.Read moreRead less
Imaging the invisible. This project aims to develop imaging technology to see and quantify objects normally invisible with X-rays. It will develop an X-ray imaging system that should provide orders of magnitude greater sensitivity to subtle changes in material composition than conventional radiography. It will devise quantitative image analysis tools for isolating specific materials of interest from complex multi-material samples, including low density components that often go undetected. Indust ....Imaging the invisible. This project aims to develop imaging technology to see and quantify objects normally invisible with X-rays. It will develop an X-ray imaging system that should provide orders of magnitude greater sensitivity to subtle changes in material composition than conventional radiography. It will devise quantitative image analysis tools for isolating specific materials of interest from complex multi-material samples, including low density components that often go undetected. Industries that could benefit significantly from this technology include airport security, the mining sector, agriculture, manufacturing quality control, and biomedical researchers studying anatomical form and function.Read moreRead less
Non-destructing X-ray testing. This project aims to improve imaging with X-rays, providing better image quality with higher throughput at a lower radiation dose. It will develop an X-ray imaging system that provides orders of magnitude greater sensitivity for detecting low-density objects that are often invisible with conventional X-ray scanners, and quantitative image analysis tools that can isolate materials from complex multi-material samples and detect individual chemical elements. Significa ....Non-destructing X-ray testing. This project aims to improve imaging with X-rays, providing better image quality with higher throughput at a lower radiation dose. It will develop an X-ray imaging system that provides orders of magnitude greater sensitivity for detecting low-density objects that are often invisible with conventional X-ray scanners, and quantitative image analysis tools that can isolate materials from complex multi-material samples and detect individual chemical elements. Significant benefits from these technologies are expected in industries including airport security, mining, agriculture, manufacturing quality control, and in research fields from medicine to geology.Read moreRead less
A brighter future: the pure-quartic soliton laser. This project aims to build an innovative, ultrafast laser based on the recent discovery of pure-quartic solitons, a new class of optical soliton. Investigating these solitons in their own right will provide new insights into the physics of soliton formation and propagation. The concept of the pure-quartic soliton laser is expected to lead to the transformation of ultrafast science and related applications with the benefit of to improving efficie ....A brighter future: the pure-quartic soliton laser. This project aims to build an innovative, ultrafast laser based on the recent discovery of pure-quartic solitons, a new class of optical soliton. Investigating these solitons in their own right will provide new insights into the physics of soliton formation and propagation. The concept of the pure-quartic soliton laser is expected to lead to the transformation of ultrafast science and related applications with the benefit of to improving efficiency, and significantly reducing the cost of high-energy ultrafast lasers. The project aims to provide benefits in ultrafast science, industrial materials processing, laser surgery, and molecular spectroscopy.Read moreRead less
Next generation photonic waveguide sensors enabled by machine learning. This project aims to establish the next frontier in photonic waveguide sensing, by using machine learning to shift the complexity out of conventional photonic-waveguide/optical-fibre sensors and into smart detection algorithms. The complexity and instability of multimode photonic waveguides, traditionally a hinderance to sensing, will be advantageously employed to train deep learning models for sensing. Expected outcomes inc ....Next generation photonic waveguide sensors enabled by machine learning. This project aims to establish the next frontier in photonic waveguide sensing, by using machine learning to shift the complexity out of conventional photonic-waveguide/optical-fibre sensors and into smart detection algorithms. The complexity and instability of multimode photonic waveguides, traditionally a hinderance to sensing, will be advantageously employed to train deep learning models for sensing. Expected outcomes include the creation of intelligent photonic sensors that can, in principle, measure any environmental parameter using any optical waveguide material. It will create new critically needed measurement capabilities for challenging harsh environments, such as extreme temperature and in-vivo biochemical sensing.Read moreRead less
Dynamic multi-modal x-ray imaging. This project aims to create sensitive new methods of x-ray imaging that capture multiple image modalities with a single snapshot. Conventional x-ray imaging is widely used in a range of industries, but captures only a fraction of the rich information that is available in the x-ray wavefield. This project expects to extract additional image modalities to reveal x-ray-transparent features, and detect microscopic textures. By combining these capabilities with the ....Dynamic multi-modal x-ray imaging. This project aims to create sensitive new methods of x-ray imaging that capture multiple image modalities with a single snapshot. Conventional x-ray imaging is widely used in a range of industries, but captures only a fraction of the rich information that is available in the x-ray wavefield. This project expects to extract additional image modalities to reveal x-ray-transparent features, and detect microscopic textures. By combining these capabilities with the ability to capture images of a moving sample, this project will enable innovative biomedical and materials research studies, and develop new imaging technologies for use in security, hospitals and manufacturing. New methods of x-ray imaging will have wide-ranging benefits for society, the economy and healthcare.Read moreRead less
Producing optimally short pulses at long wavelengths. This project aims to make the fluoride glass fibre platform the preferred material for generating ultrashort pulses at 2.8 nm and beyond. High power and efficiency from simple device architectures are essential for industry, medicine and defence. Modern sources of short pulses of light emitting mid-infrared wavelengths are complicated and inefficient. This project will improve fibre sources emitting short pulses and create the essential build ....Producing optimally short pulses at long wavelengths. This project aims to make the fluoride glass fibre platform the preferred material for generating ultrashort pulses at 2.8 nm and beyond. High power and efficiency from simple device architectures are essential for industry, medicine and defence. Modern sources of short pulses of light emitting mid-infrared wavelengths are complicated and inefficient. This project will improve fibre sources emitting short pulses and create the essential building blocks for future all-fibre arrangements that will be more robust. The sources are expected to have applications in non-linear optics and materials modification.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE220101402
Funder
Australian Research Council
Funding Amount
$415,000.00
Summary
Multi-scale, multi-modal X-ray imaging using speckle. This project aims to develop new X-ray imaging methods that capture multiple next-generation image modalities at an unprecedented range of length and time scales. While conventional X-ray imaging is routinely used in medicine and industry, it can only visualise high-density materials like bone. To reveal low-density objects like biological soft tissue and microstructure like tiny cracks, the project plans to extract two complementary image mo ....Multi-scale, multi-modal X-ray imaging using speckle. This project aims to develop new X-ray imaging methods that capture multiple next-generation image modalities at an unprecedented range of length and time scales. While conventional X-ray imaging is routinely used in medicine and industry, it can only visualise high-density materials like bone. To reveal low-density objects like biological soft tissue and microstructure like tiny cracks, the project plans to extract two complementary image modalities using a robust setup that does not rely on large-scale facilities. Significant benefits from the developed methods are expected for leading-edge research in fields including biomedicine, materials science and palaeontology, and industries such as security, medical diagnostics and manufacturing.Read moreRead less
Moving-beam phase retrieval - a route to better microscopy! This research will benefit the nation by improving the quality of x-ray diffraction and electron microscopy techniques available to Australian scientists. It will make it possible to examine microscopic structures in more detail and therefore gain more information about the atomic positions in these structures. This will greatly benefit research that depends on finding the structure of very small objects. Such research areas include ....Moving-beam phase retrieval - a route to better microscopy! This research will benefit the nation by improving the quality of x-ray diffraction and electron microscopy techniques available to Australian scientists. It will make it possible to examine microscopic structures in more detail and therefore gain more information about the atomic positions in these structures. This will greatly benefit research that depends on finding the structure of very small objects. Such research areas include nanomaterials, biological engineering, medical science and materials science. The work is also expected to have industrial applications and to make an important contribution to the development of the synchrotron science industry in Australia.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0347462
Funder
Australian Research Council
Funding Amount
$500,000.00
Summary
Femtosecond laser micromachining facility. The proposed establishment of a femtosecond laser micromachining facility, with microdiagnostic capabilities, will facilitate a range of projects involving fabrication of submicron structures in metals, polymers, glasses, ceramics and crystalline materials. This facility, unique in Australia , will be comparable to the best such facilities in the world, enabling researchers to apply new microfabrication techniques to a range of photonic and optoelectro ....Femtosecond laser micromachining facility. The proposed establishment of a femtosecond laser micromachining facility, with microdiagnostic capabilities, will facilitate a range of projects involving fabrication of submicron structures in metals, polymers, glasses, ceramics and crystalline materials. This facility, unique in Australia , will be comparable to the best such facilities in the world, enabling researchers to apply new microfabrication techniques to a range of photonic and optoelectronic devices, including laser-written optical planar waveguides, nonlinear components and photonic bandgap structures , and various biomedical microstructures. Outcomes will include demonstration and development of novel photonic/optoelectronic devices and of new techniques, crucial to cost-effective manufacture of photonic components.Read moreRead less