The behaviour and design of composite columns coupling the benefits of high strength steel and high strength concrete for large scale infrastructure. This project will involve the development of a novel structural column system which will be more efficient, robust and require less maintenance than current systems. The outcomes will involve improved design methodologies which will enable large scale infrastructure to be enhanced and will involve the use of materials which improve sustainability.
A multi-agent system for stakeholder management in off-site construction. This project aims to investigate a socio-technology model for stakeholders and informatics to improve off-site construction (OSC) productivity in infrastructure construction. A multi-agent system for OSC could drive down cost, but requires highly integrated collaboration among stakeholders. The project’s quantitative approaches include large-scale social network analysis, multi-agent consensus modelling and an optimisation ....A multi-agent system for stakeholder management in off-site construction. This project aims to investigate a socio-technology model for stakeholders and informatics to improve off-site construction (OSC) productivity in infrastructure construction. A multi-agent system for OSC could drive down cost, but requires highly integrated collaboration among stakeholders. The project’s quantitative approaches include large-scale social network analysis, multi-agent consensus modelling and an optimisation algorithm for collaborative planning. The project outcomes are expected to secure long-term economic benefits by enhancing performance in complex projects.Read moreRead less
Leveraging research and development (R and D) for the Australian built environment. This project will evaluate impacts, diffusion mechanisms and uptake of research and development (R and D) in the Australian building and construction industry. Building on a retrospective analysis and industry consultation, a future-focussed industry roadmap will be developed to establish R and D policies to inform and improve R and D investment effectiveness.
Highly Crosslinked Poly(urea-co-urethane) Copolymer Concrete Floor Coatings. Recently developed, poly(urea-co-urethane) concrete floor screeds are used, in the construction industry, to provide protection against corrosive chemicals and abrasive wear; properties unmatched by other commercial floor treatments. Significantly such material has reduced environmental emissions and toxicity hazards. Factors, which affect the cure and performance of poly(urea-co-urethane) flooring materials will now ....Highly Crosslinked Poly(urea-co-urethane) Copolymer Concrete Floor Coatings. Recently developed, poly(urea-co-urethane) concrete floor screeds are used, in the construction industry, to provide protection against corrosive chemicals and abrasive wear; properties unmatched by other commercial floor treatments. Significantly such material has reduced environmental emissions and toxicity hazards. Factors, which affect the cure and performance of poly(urea-co-urethane) flooring materials will now be studied, including the uncontrolled release of carbon dioxide, which results in sporadic blister formation, leading to the on-site product failures that have severely limited the product's commercial growth. Clear understanding of cure chemistry and adhesion will be established for the first, allowing for the products further development.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE240101422
Funder
Australian Research Council
Funding Amount
$467,760.00
Summary
Chameleon-Inspired Building Envelope for the Australian Building Sector. The project aims to develop an intelligent reflective coating that can act like a chameleon skin on a building surface, allowing sunlight to reflect efficiently in summer and be absorbed in winter without using pigments or dyes. The research will reveal how microstructural architecture can mimic a chameleon skin on building envelopes to address the critical challenge of this technology, which is overcooling in winter. The e ....Chameleon-Inspired Building Envelope for the Australian Building Sector. The project aims to develop an intelligent reflective coating that can act like a chameleon skin on a building surface, allowing sunlight to reflect efficiently in summer and be absorbed in winter without using pigments or dyes. The research will reveal how microstructural architecture can mimic a chameleon skin on building envelopes to address the critical challenge of this technology, which is overcooling in winter. The expected outcome is a smart coating technology that is easy to manufacture on small and large scales with no winter penalty, compatible with even, uneven and rough surfaces, free from the use of pigment and durable under sunlight. Read moreRead less
Boosting up Productivity: Optimizing Scaffolding Life Cycle Management with Virtual Design and Construction. Scaffolding management can be critical to construction industries across oil and gas, building, and infrastructure sectors. It can lead to low productivity and safety due to static and poor planning. This project aims to innovatively integrate a decision support system, virtual design and construction, and onsite monitoring into one dynamic planning system to significantly lift productivi ....Boosting up Productivity: Optimizing Scaffolding Life Cycle Management with Virtual Design and Construction. Scaffolding management can be critical to construction industries across oil and gas, building, and infrastructure sectors. It can lead to low productivity and safety due to static and poor planning. This project aims to innovatively integrate a decision support system, virtual design and construction, and onsite monitoring into one dynamic planning system to significantly lift productivity. The emphasis is on producing optimal solutions for planning, design, erection, monitoring, dismantling, and relocation of scaffolding, so that productivity is maximised subject to satisfying required cost and safety constraints. The project aims to therefore secure long-term economic benefits by improving productivity and enhancing project performance.Read moreRead less
Mixed Mode Torsion-Shear-Bending Failure in SFRC Elements . In 2017 and 2018 the Australian Standards for the design of concrete bridges and structures were released; these are some of the first in the world, to include design procedures for steel fibre reinforced concrete (SFRC) in a comprehensive way. While rules have been introduced for shear and bending of SFRC girders, the rules exclude the use fibres to carry torsional moments. This study investigates the torsion-bending-shear interaction ....Mixed Mode Torsion-Shear-Bending Failure in SFRC Elements . In 2017 and 2018 the Australian Standards for the design of concrete bridges and structures were released; these are some of the first in the world, to include design procedures for steel fibre reinforced concrete (SFRC) in a comprehensive way. While rules have been introduced for shear and bending of SFRC girders, the rules exclude the use fibres to carry torsional moments. This study investigates the torsion-bending-shear interaction performance of SFRC members. The study will provide vital data needed for for adoption by engineers and Standards bodies.Read moreRead less
Measuring and modelling the mechanical response of soils incorporating recycled tyres. Civil engineers use backfill to refill excavated areas around new structures. They have found recently that rubber chips and shredded rubber make excellent backfill when combined with a small percentage of cement to make ‘rubber soil’. The widespread use of rubber soil therefore offers a tremendous opportunity to make use of a serious waste product to achieve important engineering outcomes. However, too little ....Measuring and modelling the mechanical response of soils incorporating recycled tyres. Civil engineers use backfill to refill excavated areas around new structures. They have found recently that rubber chips and shredded rubber make excellent backfill when combined with a small percentage of cement to make ‘rubber soil’. The widespread use of rubber soil therefore offers a tremendous opportunity to make use of a serious waste product to achieve important engineering outcomes. However, too little is known about the technology. This project will model the behaviour of rubber soil in order to introduce it as an environmentally sustainable, cost-effective and technically sound choice of geomaterial for both standard and non-standard geotechnical structures.Read moreRead less
Efficient construction: analysis of integrated supply chains for innovative off site housing manufacturing. The Australian housing industry is failing to meet demand. Housing construction is too slow, as indicated by a 40 per cent increase in average construction time over the last fifteen years. Industry fragmentation is an oft-cited cause of construction inefficiency. A solution is offsite manufacturing. Australia lags other countries in adoption of off-site manufacturing. To achieve adoption ....Efficient construction: analysis of integrated supply chains for innovative off site housing manufacturing. The Australian housing industry is failing to meet demand. Housing construction is too slow, as indicated by a 40 per cent increase in average construction time over the last fifteen years. Industry fragmentation is an oft-cited cause of construction inefficiency. A solution is offsite manufacturing. Australia lags other countries in adoption of off-site manufacturing. To achieve adoption and diffusion, fragmentation needs to be addressed. This project aims to analyse the factors affecting supply chain integration to support innovative offsite manufacturing and develop a novel collaborative practice based implementation model.Read moreRead less
Transforming liquefied
natural gas (LNG) plant construction productivity through mobile computing technologies. Australia's liquefied natural gas (LNG) construction industry is plagued by major cost blowouts. This project will investigate a new mobile computing approach for streamlining LNG construction projects, thus yielding significant productivity gains.