Integrated Cooling Enhancement Technology for Power Electronics. This project aims to develop an unprecedented integrated cooling enhancement technology (IceTech) for silicon carbide on silicon power electronics. IceTech represents a radical departure from current failure-prone packaging solutions. The project aims to elucidate the fundamental interactions between magnetism, heat and mass transfer and apply them to cooling. In partnership with SPTS Technologies, the project then aims to develop ....Integrated Cooling Enhancement Technology for Power Electronics. This project aims to develop an unprecedented integrated cooling enhancement technology (IceTech) for silicon carbide on silicon power electronics. IceTech represents a radical departure from current failure-prone packaging solutions. The project aims to elucidate the fundamental interactions between magnetism, heat and mass transfer and apply them to cooling. In partnership with SPTS Technologies, the project then aims to develop fabrication processes for integrating microchannels and highly sensitive integrated silicon carbide temperature sensors into a chip. This novel fabrication technology allows for the implementation of the revolutionary enhanced cooling concept using two-phase flow with magnetic liquid plugs.Read moreRead less
Investigation of Thermotransport in Liquid Metal Alloys. This project aims to improve understanding of thermotransport to support the use of liquid metal allows in manufacture and energy transfer. The coupled flow of heat and mass (thermotransport) rapidly produces segregation in liquid metal alloys in a temperature gradient. This is a major problem in optimising the solidification from melts in manufacturing and for the design of liquid alloys for transfer of heat. Thermotransport is very poorl ....Investigation of Thermotransport in Liquid Metal Alloys. This project aims to improve understanding of thermotransport to support the use of liquid metal allows in manufacture and energy transfer. The coupled flow of heat and mass (thermotransport) rapidly produces segregation in liquid metal alloys in a temperature gradient. This is a major problem in optimising the solidification from melts in manufacturing and for the design of liquid alloys for transfer of heat. Thermotransport is very poorly understood. The project aims to achieve an understanding of the process through a combination of new theory, corresponding new experiments and advanced computer simulations. This would be a major advance in the area, supporting the development of new systems to prevent segregation.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE130100127
Funder
Australian Research Council
Funding Amount
$400,000.00
Summary
Controlled radiation facility to investigate turbulence-radiation-chemistry interactions in high-flux solar reactors. This project's facility will support the transition of Australia’s energy intensive industries, including minerals and resources, to a much lower carbon intensity. It will also underpin collaborations with internationally leading partners to develop novel solar-combustion hybrid reactors for the production of solar fuels and for minerals processing.
A novel air-cooled fuel cell system. This project presents a novel cooling technology for fuel cell systems. This new design will not only save up to 50 per cent of the material cost but also leads to 20 per cent less fuel consumption compared to the existing fuel cells. This can save us billions of dollars per year with profound impact on our nation's carbon-emission-free alternative energy sources.
Adaptation of carbon free fuels to high temperature industrial processes. This project aims to deepen our understanding of the underpinning scientific and engineering solutions required to adapt carbon free renewable fuels to high temperature industrial processes. The project will advance the knowledge base of innovative strategies, such as fuel blending and oxidant stream vitiation needed to replace fossil based fuels with alternatives such as hydrogen, or ammonia. Advance experimental and comp ....Adaptation of carbon free fuels to high temperature industrial processes. This project aims to deepen our understanding of the underpinning scientific and engineering solutions required to adapt carbon free renewable fuels to high temperature industrial processes. The project will advance the knowledge base of innovative strategies, such as fuel blending and oxidant stream vitiation needed to replace fossil based fuels with alternatives such as hydrogen, or ammonia. Advance experimental and computational tools will be used to investigate the controlling parameters to facilitate adaptation including burning characteristics, modes of heat transfer and pollutant emissions. The project will generate deeper understanding of the proposed approaches, detailed and unique high fidelity data, and suitable predictive models.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE180101300
Funder
Australian Research Council
Funding Amount
$368,446.00
Summary
Probing interfacial impedance in all-solid-state lithium-ion batteries. This project aims to investigate the mechanism behind the high impedance at the interface between electrodes and the solid electrolyte in solid-state lithium-ion batteries using advanced in-situ transmission electron microscopy. The outcomes will deepen knowledge in chemical and structural evolution at the electrode–electrolyte interface during battery operation under different conditions, and thus inform the design and fabr ....Probing interfacial impedance in all-solid-state lithium-ion batteries. This project aims to investigate the mechanism behind the high impedance at the interface between electrodes and the solid electrolyte in solid-state lithium-ion batteries using advanced in-situ transmission electron microscopy. The outcomes will deepen knowledge in chemical and structural evolution at the electrode–electrolyte interface during battery operation under different conditions, and thus inform the design and fabrication of safe, high power, and long lasting solid-state batteries for a myriad of portable electronic devices and the emerging electric vehicles.Read moreRead less
Reduction of Legionnaires' Disease from Cooling Towers. Inhaled water droplets containing Legionella bacteria can cause potentially fatal Legionnaires? disease. Algae are the main source of organic matter in cooling towers on which Legionella feed. If droplets are prevented from leaving the tower they cannot cause disease. If no light enters a cooling tower no algae grow. This project aims to identify and develop designs and measurement methods for cooling towers which give low levels of drople ....Reduction of Legionnaires' Disease from Cooling Towers. Inhaled water droplets containing Legionella bacteria can cause potentially fatal Legionnaires? disease. Algae are the main source of organic matter in cooling towers on which Legionella feed. If droplets are prevented from leaving the tower they cannot cause disease. If no light enters a cooling tower no algae grow. This project aims to identify and develop designs and measurement methods for cooling towers which give low levels of droplets leaving and light entering. The new designs will reduce Legionnaires? disease infections by hundreds of times which eliminates a major urban hazard in Australia.Read moreRead less
High Energy Density - High Delivery Rate Thermal Energy Storage. This project aims to address the intermittency of renewable energy sources using novel thermal storage media. Advanced heat transfer modelling and in situ neutron diffraction and imaging are intended to be used to optimise the microstructure of newly developed miscibility gap thermal storage systems. The new media store energy as the latent heat of fusion of one phase in a stable, high thermal conductivity inverted microstructure. ....High Energy Density - High Delivery Rate Thermal Energy Storage. This project aims to address the intermittency of renewable energy sources using novel thermal storage media. Advanced heat transfer modelling and in situ neutron diffraction and imaging are intended to be used to optimise the microstructure of newly developed miscibility gap thermal storage systems. The new media store energy as the latent heat of fusion of one phase in a stable, high thermal conductivity inverted microstructure. The high energy density of the latent heat (0.5-4.5 Mega Joules/Litre) requires storage volumes as little as five per cent of those relying upon heat capacity and the metal matrix has a hundred-fold greater thermal conductivity than current systems. It is proposed that a range of such materials will be engineered for concentrated solar thermal and space heating applications.Read moreRead less
Blue energy harvesting and storage technology for wearable electronics. This project aims to develop new self-charging power devices that can harvest and store body energy generated during body motions, and power smart and implantable medical electronics. The project will develop new Piezo-supercapacitors by designing new electrode materials and cell designs. The charge storage and transport kinetics will be uncovered using advanced in-situ characterisation techniques and modern simulation metho ....Blue energy harvesting and storage technology for wearable electronics. This project aims to develop new self-charging power devices that can harvest and store body energy generated during body motions, and power smart and implantable medical electronics. The project will develop new Piezo-supercapacitors by designing new electrode materials and cell designs. The charge storage and transport kinetics will be uncovered using advanced in-situ characterisation techniques and modern simulation methods. The project expects to generate new knowledge in blue energy harvesting and storage systems, training for young scientists, and generate intellectual property with potential commercialised products to be used in implantable devices, placing Australia at the forefront of new technology.Read moreRead less
Metal-free catalysts for clean production of energy and hydrogen peroxide. This project aims to create novel metal-free carbon-based catalysts to replace the scarce and expensive noble metal catalysts. Noble metal catalysts are needed for clean production of electricity by fuel cells or hydrogen peroxide from hydrogen and oxygen gases. A combined theoretical and experimental approach will be developed for controlled synthesis of heteroatom-doped carbon catalysts and to improve our understanding ....Metal-free catalysts for clean production of energy and hydrogen peroxide. This project aims to create novel metal-free carbon-based catalysts to replace the scarce and expensive noble metal catalysts. Noble metal catalysts are needed for clean production of electricity by fuel cells or hydrogen peroxide from hydrogen and oxygen gases. A combined theoretical and experimental approach will be developed for controlled synthesis of heteroatom-doped carbon catalysts and to improve our understanding of the catalytic mechanism and structure-activity relationship for the novel carbon catalysts. The project is expected to lay fundamental groundwork for a new paradigm in carbon-based catalysts that should be of considerable significance for energy and chemical production in a clean and cost effective way.Read moreRead less