Enhanced sensitivity of electrospray ionization mass spectrometry. Enhanced sensitivity of electrospray ionization mass spectrometry. This project aims to enhance the sensitivity of nano-electrospray ionization mass spectrometry (nanoESI-MS) by an order of magnitude by simultaneously overcoming the two interdependent limitations in ion generation and transmission efficiency. This project will design glass capillaries and tubes with complex structures to enable both multiplexing ion generation fr ....Enhanced sensitivity of electrospray ionization mass spectrometry. Enhanced sensitivity of electrospray ionization mass spectrometry. This project aims to enhance the sensitivity of nano-electrospray ionization mass spectrometry (nanoESI-MS) by an order of magnitude by simultaneously overcoming the two interdependent limitations in ion generation and transmission efficiency. This project will design glass capillaries and tubes with complex structures to enable both multiplexing ion generation from a single capillary and geometrically matching the bore of the tube collecting the emitted ion plume. NanoESI-MS has become an indispensable analytical tool for proteomics and synthetic chemistry. The significant enhancement of nanoESI-MS sensitivity in this project is expected to accelerate progress in disease research, biomarker discovery and drug development.Read moreRead less
Development of hierarchical carbon nanotube-glass fibre composites. Development of hierarchical carbon nanotube-glass fibre composites. This project aims to develop a new generation of hierarchical carbon nanotube-glass fibre reinforced composites, using a novel synthesis method that grafts carbon nanotubes (CNTs) onto glass fibre and glass fabric. These hierarchical nano- and micro-fibre composites will have improved in-plane mechanical properties, enhanced fracture toughness and higher electri ....Development of hierarchical carbon nanotube-glass fibre composites. Development of hierarchical carbon nanotube-glass fibre composites. This project aims to develop a new generation of hierarchical carbon nanotube-glass fibre reinforced composites, using a novel synthesis method that grafts carbon nanotubes (CNTs) onto glass fibre and glass fabric. These hierarchical nano- and micro-fibre composites will have improved in-plane mechanical properties, enhanced fracture toughness and higher electric conductivity. This project will use a comprehensive experimental and theoretical study to develop design tools for producing this new generation of composites. The anticipated outcome is lighter and stronger glass fibre composite structures, such as wind turbines in the renewable wind energy industry and boats in the marine industry.Read moreRead less
Low cost solution-processable 2D nanomaterials for smart windows. This project aims to develop low cost and scalable synthesis of the active functional nanomaterials in smart windows, their facile application techniques, and their integration into the glass manufacturing process. Smart windows, with thermochromic and electrochromic functionalities, will play important roles towards efficient energy usage and conservation (in terms of air-conditioning and lighting) in most buildings including off ....Low cost solution-processable 2D nanomaterials for smart windows. This project aims to develop low cost and scalable synthesis of the active functional nanomaterials in smart windows, their facile application techniques, and their integration into the glass manufacturing process. Smart windows, with thermochromic and electrochromic functionalities, will play important roles towards efficient energy usage and conservation (in terms of air-conditioning and lighting) in most buildings including offices, schools, and residential homes. . The intended outcome of this project is to facilitate the commercialisation of low-cost, energy-saving smart windows for efficient energy usage and conservation, which is an integral part of a sustainable environment.Read moreRead less
Understanding and optimising the microstructure of Germanium-Arsenic-Selenium glasses for superior device performance. The project will seek to use a combined theoretical and experimental approach to develop 'state of the art' optical glass materials for use in integrated nonlinear optical components. Such materials could be used as optical waveguides in broadband communication systems and offer the possibility of significant improvement in telecommunication performance.
Gel interactions in geopolymers for sustainable construction. This project will benefit Australia by enabling reliable production of environmentally friendly construction materials. These materials, geopolymer cements, have been developed to the point where they are beginning to be commercialised in Australia, but the factors controlling their performance and durability are only beginning to be well understood. Geopolymer cements are made using ash from coal-fired power stations, and are competi ....Gel interactions in geopolymers for sustainable construction. This project will benefit Australia by enabling reliable production of environmentally friendly construction materials. These materials, geopolymer cements, have been developed to the point where they are beginning to be commercialised in Australia, but the factors controlling their performance and durability are only beginning to be well understood. Geopolymer cements are made using ash from coal-fired power stations, and are competitive with traditional Portland cement in terms of both performance and cost. This project will use recently developed experimental techniques and Australian research expertise in this field, and will lead to significant environmental and cost savings in the construction industry.Read moreRead less
Synthesis of novel phases from Group IV elements under extreme pressure. Materials based on the group IV elements carbon, silicon and germanium are technologically important for a wide range of current applications. When exposed to extreme pressure, these materials can form entirely new phases with novel and potentially useful properties. Since there have been few previous attempts to establish which of the new phases are stable on pressure release and to measure their properties for subsequent ....Synthesis of novel phases from Group IV elements under extreme pressure. Materials based on the group IV elements carbon, silicon and germanium are technologically important for a wide range of current applications. When exposed to extreme pressure, these materials can form entirely new phases with novel and potentially useful properties. Since there have been few previous attempts to establish which of the new phases are stable on pressure release and to measure their properties for subsequent exploitation, this project aims to use novel approaches to address these topics. The expected outcome of this project will be new phases of group IV elements with novel properties that have potential for commercial exploitation.Read moreRead less
Geopolymers for nuclear applications. With the pressing need for the reduction of Greenhouse emissions from electricity generation in Australia, one option that must be seriously considered is nuclear energy. However, the issue of waste storage is a highly significant one that must be addressed. Geopolymeric cements are expected to perform much better than traditional Portland cements in nuclear applications, both for solidification of radioactive wastes and also for the construction of undergro ....Geopolymers for nuclear applications. With the pressing need for the reduction of Greenhouse emissions from electricity generation in Australia, one option that must be seriously considered is nuclear energy. However, the issue of waste storage is a highly significant one that must be addressed. Geopolymeric cements are expected to perform much better than traditional Portland cements in nuclear applications, both for solidification of radioactive wastes and also for the construction of underground waste storage bunkers. This project will use Australia's strong existing knowledge in geopolymers research, and apply it to the development of materials to fill the need for environmentally secure waste storage solutions.Read moreRead less
Guided droplet deposition: Microfabrication of advanced materials. The progress of micro and nanofabrication is opening an array of new opportunities with a new degree of freedom for manufacturing. This process will complement the existing micromanufacturing facilities in Melbourne. While metal printing and deposition of polymers is presently available, the guided droplet deposition will extend current capabilities to include ceramics and high melting temperature metals. Direct application to me ....Guided droplet deposition: Microfabrication of advanced materials. The progress of micro and nanofabrication is opening an array of new opportunities with a new degree of freedom for manufacturing. This process will complement the existing micromanufacturing facilities in Melbourne. While metal printing and deposition of polymers is presently available, the guided droplet deposition will extend current capabilities to include ceramics and high melting temperature metals. Direct application to medical devices will provide a more effective surface for improved performance and allow the incorporation of smart and sensor materials for multifunctional devices. Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE200100047
Funder
Australian Research Council
Funding Amount
$245,750.00
Summary
An upgraded nanoindenter facility with in-situ Raman at high temperature. This LIEF grant aims to upgrade an existing TI950 Nanoindenter with a new system that physically couples
Raman Spectroscopy system with on a shared stage that uniquely enables combined assessment of materials
with sub-micrometers or spanning millimetre-sized regions from room temperature up to 800oC. The equipment
with much enhanced features will be unique in Australia with the added Raman and a hot stage.
The combination ....An upgraded nanoindenter facility with in-situ Raman at high temperature. This LIEF grant aims to upgrade an existing TI950 Nanoindenter with a new system that physically couples
Raman Spectroscopy system with on a shared stage that uniquely enables combined assessment of materials
with sub-micrometers or spanning millimetre-sized regions from room temperature up to 800oC. The equipment
with much enhanced features will be unique in Australia with the added Raman and a hot stage.
The combination of Raman and nanoindentation allows the mechanical property to be correlated to physical
characteristics such as chemical bonds and physical state, volume fractionation of crystallinity, amorphous and
unpolymerised phases, molecular orientation, residual strain, polymer cross-linking, surface treatment effects.Read moreRead less
Cost effective carbon fibres from polyethylene for lightweight applications. This project aims to deliver cost-effective, high-performance carbon fibres from polyethylene through the use of novel catalysts and advanced processing techniques. Carbon fibre-reinforced composites are extremely strong and light fibre-reinforced polymers that are commonly used wherever high strength-to-weight ratio and rigidity are required, such as in aerospace, automotive and civil engineering applications. However, ....Cost effective carbon fibres from polyethylene for lightweight applications. This project aims to deliver cost-effective, high-performance carbon fibres from polyethylene through the use of novel catalysts and advanced processing techniques. Carbon fibre-reinforced composites are extremely strong and light fibre-reinforced polymers that are commonly used wherever high strength-to-weight ratio and rigidity are required, such as in aerospace, automotive and civil engineering applications. However, broader market uptake is currently limited by carbon fibre costs. The project aims to deliver high-quality fibre with real potential to capture a share of the $14-billion carbon fibre composite market.Read moreRead less