Self-assembly of gelling biopolymer particles. Biopolymers provide a renewable source of structuring agents for a variety of potential uses in food, pharmaceutical and other applications that require bio-compatibility. Swollen biopolymer particles of sub-millimetre size are particularly useful as they combine macroscopic structure formation with an ability to flow and a desirable soft solid texture. Two limitations to the current utilisation of biopolymer particles are that they either cannot be ....Self-assembly of gelling biopolymer particles. Biopolymers provide a renewable source of structuring agents for a variety of potential uses in food, pharmaceutical and other applications that require bio-compatibility. Swollen biopolymer particles of sub-millimetre size are particularly useful as they combine macroscopic structure formation with an ability to flow and a desirable soft solid texture. Two limitations to the current utilisation of biopolymer particles are that they either cannot be predictably produced direct from a dried form, or if they are (e.g. cooked starch granules), there is a lack of scientific understanding that limits use of natural sources without subsequent chemical modification. This project will provide the science & technology to overcome these limitations.Read moreRead less
Understanding of structure development in drying droplets through the stickiness paradigm. The aims of this research are to develop a new model for multicomponent droplet drying. This model will provide predictions of conditions where composition variation exists in the drying particles. Validation of the model will be made using a novel instrument to measure the in-situ development of surface stickiness during drying. Stickiness is an important issue encountered during drying and handling of so ....Understanding of structure development in drying droplets through the stickiness paradigm. The aims of this research are to develop a new model for multicomponent droplet drying. This model will provide predictions of conditions where composition variation exists in the drying particles. Validation of the model will be made using a novel instrument to measure the in-situ development of surface stickiness during drying. Stickiness is an important issue encountered during drying and handling of some key food and consumer materials. Currently, there is no technique to measure the evolution of stickiness during drying. Key outputs will include the model, the instrument, and the development of efficient methods to generate the multicomponent data.Read moreRead less
Engineering Nanostructured Bio-inspired Products. New nanostructured products that draw on biology promise to revolutionise our lives and economy. Designer emulsions and self-assembling particles inspired by viruses are two such products that form the focus for this research programme. The constitutive behaviour of bio-molecular films that control emulsion performance will be characterised and linked to molecular properties and manufacturing conditions. A broad-based technology platform for t ....Engineering Nanostructured Bio-inspired Products. New nanostructured products that draw on biology promise to revolutionise our lives and economy. Designer emulsions and self-assembling particles inspired by viruses are two such products that form the focus for this research programme. The constitutive behaviour of bio-molecular films that control emulsion performance will be characterised and linked to molecular properties and manufacturing conditions. A broad-based technology platform for the in vitro creation of self-assembling biological nanoparticles will also be developed. Key outcomes will be valuable IPR and fundamental engineering science knowledge to ensure that the value chain for this class of products can deliver commercial outcomes.Read moreRead less
Wet granule mechanics and their influence on agglomeration behaviour and granulation processes. Granulation is a widely-used particle size enlargement process performed by spraying a liquid binder onto an agitated powder mass. It is currently impossible to quantitatively predict granule growth behaviour in terms of the fundamental properties of the particles and binder. This project will measure and model the deformation of granules and the strength of bonds formed between them and use this info ....Wet granule mechanics and their influence on agglomeration behaviour and granulation processes. Granulation is a widely-used particle size enlargement process performed by spraying a liquid binder onto an agitated powder mass. It is currently impossible to quantitatively predict granule growth behaviour in terms of the fundamental properties of the particles and binder. This project will measure and model the deformation of granules and the strength of bonds formed between them and use this information to predict their growth behaviour. Special attention will be given to the effects of strain-rate and particle morphology in granulation mechanics. Improvements in granulation technology will be of great benefit to food, pharmaceutical, agricultural, explosives and mining industries and opens the way to 'designer granulation' for special purposes.Read moreRead less
Optimising Fouling Control in Membrane Bioreactors. Membrane bioreactors (MBR) are growing in importance for wastewater treatment because they offer an alternative for producing higher effluent quality wastewater within a more compact space compared to conventional processes. However, due to the pumping and bubbling used to keep the membranes clear of foulants resulting from the biological processes in MBR's, controlling fouling incurs significant energy usage and costs. The proposal aims to red ....Optimising Fouling Control in Membrane Bioreactors. Membrane bioreactors (MBR) are growing in importance for wastewater treatment because they offer an alternative for producing higher effluent quality wastewater within a more compact space compared to conventional processes. However, due to the pumping and bubbling used to keep the membranes clear of foulants resulting from the biological processes in MBR's, controlling fouling incurs significant energy usage and costs. The proposal aims to reduce the costs of fouling control by understanding the optimal conditions to remove these depositions and improve the design of MBR modules, operating conditions and shear delivery in the membrane system.Read moreRead less
Macromolecular Fouling in Membrane Bioreactors. As the demands for domestic and industrial water increasing in Australia and overseas, membrane bioreactors (MBR) offer an alternative for producing higher effluent quality wastewater compared to conventional processes. However, aeration costs used to remove fouling deposits (which reduce the operating performance) need to be further minimised. The proposal aims to study fundamental mechanisms involve in the deposition of foulant components by usin ....Macromolecular Fouling in Membrane Bioreactors. As the demands for domestic and industrial water increasing in Australia and overseas, membrane bioreactors (MBR) offer an alternative for producing higher effluent quality wastewater compared to conventional processes. However, aeration costs used to remove fouling deposits (which reduce the operating performance) need to be further minimised. The proposal aims to study fundamental mechanisms involve in the deposition of foulant components by using model systems of polysaccharides, proteins and microbial cells and comparing these with real MBR systems. The effect of bubbling varied gas compositions (air/H2S ratios) a novel approach in this study will be investigated to prevent or remove foulants in MBR systems. Read moreRead less
Electronically Conducting Nanofibres and Assemblies. With the use of new techniques that have just emerged in the last two years and are receiving rapidly growing interest throughout the world, this project will bring to Australia a new nanofabrication platform for making a variety of complex nanostructures. Fundamental researches on these complex nanostructures will greatly advance nanoscience. New nanotechnologies will be developed to address some world-wide challenging problems, e.g. energy ....Electronically Conducting Nanofibres and Assemblies. With the use of new techniques that have just emerged in the last two years and are receiving rapidly growing interest throughout the world, this project will bring to Australia a new nanofabrication platform for making a variety of complex nanostructures. Fundamental researches on these complex nanostructures will greatly advance nanoscience. New nanotechnologies will be developed to address some world-wide challenging problems, e.g. energy conversion and storage, chemical/biological sensing and other micro- and nanoelectronic devices. This project will bring both breakthrough science and frontier technologies for building and transforming Australian industries and help place Australia at the forefront of nanotechnology. Read moreRead less
Understanding the Behavior of Single-Walled Carbon Nanotubes in Liquids. The imminent manufacture of Single Walled Carbon Nanotubes (SWNTs) at prices comparable to those of high-performance polymers such as Kevlar, will open up potential applications of SWNTs as high-performance fibres and coatings. A major challenge is the development of scalable processes for producing large objects made of SWNTs. This project, in collaboration with researchers at Rice and Stanford Universities, aims to unders ....Understanding the Behavior of Single-Walled Carbon Nanotubes in Liquids. The imminent manufacture of Single Walled Carbon Nanotubes (SWNTs) at prices comparable to those of high-performance polymers such as Kevlar, will open up potential applications of SWNTs as high-performance fibres and coatings. A major challenge is the development of scalable processes for producing large objects made of SWNTs. This project, in collaboration with researchers at Rice and Stanford Universities, aims to understand the principles that underlie the successful liquid state processing of SWNTs. The novel strategies that arise will cement Australia's position as a leading country for research in nanotechnology, and place it at the forefront of this field, with great potential for economic advantage.Read moreRead less
Design of granule microstructure in fluidised bed granulation: Modelling & experimental realisation. Production of granules with engineered microstructure is a common industrial problem. This project focuses on understanding how to control the microstructure of granules - including size, porosity, composition - produced by fluidised bed granulation by developing systematic, science based design rules. Designer granules can be used to develop and fast-track the development of innovative microstru ....Design of granule microstructure in fluidised bed granulation: Modelling & experimental realisation. Production of granules with engineered microstructure is a common industrial problem. This project focuses on understanding how to control the microstructure of granules - including size, porosity, composition - produced by fluidised bed granulation by developing systematic, science based design rules. Designer granules can be used to develop and fast-track the development of innovative microstructured products for niche markets and the next generation of high-value agricultural, food and pharmaceutical industries. This unique project clearly contributes to the National Research Priority of 'Frontier Technologies' and will further enhance Australia's world-class excellence in both powder fluidisation and granulation research.Read moreRead less
Fatigue Life Prediction of Nano-filler Modified Composites. The proposed project aims to study the behaviour and the failure mechanisms of polymer nanocomposites under cyclic loading. The outcomes of the project will make original contributions to our knowledge base on such materials. The mechanics modelling and statistical analysis of the prediction of fatigue life will provide a sound physical basis and a useful tool for any future improvement and optimisation of the composites to achieve bett ....Fatigue Life Prediction of Nano-filler Modified Composites. The proposed project aims to study the behaviour and the failure mechanisms of polymer nanocomposites under cyclic loading. The outcomes of the project will make original contributions to our knowledge base on such materials. The mechanics modelling and statistical analysis of the prediction of fatigue life will provide a sound physical basis and a useful tool for any future improvement and optimisation of the composites to achieve better reliability and integrity in their intended applications. This study will bring economic benefits to the end-users of advanced material technology including the Australian materials industries. Read moreRead less