Stress Evaluation with Non-Linear Guided Waves. This project plans to investigate a novel approach for in situ measurement of stress in structures based on an internal resonance phenomenon for nonlinear guided waves. Monitoring the stress level of critical structural components is important to ensure structural safety. The project plans to derive the requirements for this internal resonance and its dependence on stress analytically and verify them experimentally for both simple waveguides and mo ....Stress Evaluation with Non-Linear Guided Waves. This project plans to investigate a novel approach for in situ measurement of stress in structures based on an internal resonance phenomenon for nonlinear guided waves. Monitoring the stress level of critical structural components is important to ensure structural safety. The project plans to derive the requirements for this internal resonance and its dependence on stress analytically and verify them experimentally for both simple waveguides and more realistic structures. The expected outcome is the demonstration of the feasibility of a new inexpensive method for continuous monitoring of applied or thermally-induced stresses, which is of great importance in several engineering contexts, such as modern railway track rails, pipelines or pre-stressed strands in concrete structures.Read moreRead less
Novel vibro-acoustic technologies for detecting bearing and wheel defects in rail vehicles. Research will be conducted to provide the basis for the development of a novel automatic system that detects bearing and wheel defects in under-way railway wagons, thus helping to prevent catastrophic derailments and minimise fuel consumption. It will also maintain Australian industry at the forefront of the global track-side monitoring industry.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE180100041
Funder
Australian Research Council
Funding Amount
$680,320.00
Summary
National laser-based non-destructive evaluation system. This project aims to establish the first Australian national facility for non-destructive evaluation, consisting of a three-dimensional scanning laser vibrometer, laser shearography, and an optical de-rotator, to enable full-field characterisation of the deformation and damage state of materials and structures. This solution is expected to perform rapid, broad-area scans, characterise dynamic response and wave propagation in human-engineere ....National laser-based non-destructive evaluation system. This project aims to establish the first Australian national facility for non-destructive evaluation, consisting of a three-dimensional scanning laser vibrometer, laser shearography, and an optical de-rotator, to enable full-field characterisation of the deformation and damage state of materials and structures. This solution is expected to perform rapid, broad-area scans, characterise dynamic response and wave propagation in human-engineered or natural structures, and diagnose rotating systems. This will enhance experimental capabilities, with uses spanning many industry sectors including aerospace, naval, automotive and medical.Read moreRead less
The mechanics of quiet airfoils. Airfoil trailing edge noise affects many technologies, from wind turbines to computer cooling fans and must be reduced to improve productivity, public health and the environment. This project aims to develop a new class of quiet airfoil design and an active trailing edge noise control system to help solve this important problem. This research will provide multiple, long terms benefits to Australia that include reduced greenhouse gas emissions, reduced airport no ....The mechanics of quiet airfoils. Airfoil trailing edge noise affects many technologies, from wind turbines to computer cooling fans and must be reduced to improve productivity, public health and the environment. This project aims to develop a new class of quiet airfoil design and an active trailing edge noise control system to help solve this important problem. This research will provide multiple, long terms benefits to Australia that include reduced greenhouse gas emissions, reduced airport noise, new high technology products for export, and improved public health.Read moreRead less
Green cool wine: solar powered solid adsorption refrigeration system with ice storage to provide cooling capability for wine industry. The project is to develop a solar thermal powered refrigeration system that is able to build up an ice bank (as a storage) through daily intermittent cycle, from late Australian spring. The ice bank will used in the vintage season in a winery for cooling purposes. The system is able to reduce the carbon foot print of the wineries significantly.
Resolving the impact of pressure on hot and low-oxygen combustion. Despite the important role of renewable energy sources, combustion will remain essential for transportation into the foreseeable future. This project aims to investigate flames burning in a hot and low-oxygen environment. The objective is to better understand how these conditions could be applied to gas turbines. This project expects to generate new knowledge to enable a reduction in emissions, improvement in efficiency and incre ....Resolving the impact of pressure on hot and low-oxygen combustion. Despite the important role of renewable energy sources, combustion will remain essential for transportation into the foreseeable future. This project aims to investigate flames burning in a hot and low-oxygen environment. The objective is to better understand how these conditions could be applied to gas turbines. This project expects to generate new knowledge to enable a reduction in emissions, improvement in efficiency and increase in power output. Expected outcomes of this project include improved understanding of the governing physics to enable development of design tools for next-generation engines. This should provide significant benefits, such as reduced reliance on fossil fuels and a critical reduction in greenhouse gas emissions.Read moreRead less
Better predictions of spray flames. This project aims to predict spray flames using experimental and computational modelling of the combustion near burning droplets in spray flames. Spray flames are the dominant source of energy for the transportation sector, and are expected to remain so well into the future. Limited understanding of combustion processes surrounding the burning of the droplets restricts further technological development. This project is expected to enable progress in design too ....Better predictions of spray flames. This project aims to predict spray flames using experimental and computational modelling of the combustion near burning droplets in spray flames. Spray flames are the dominant source of energy for the transportation sector, and are expected to remain so well into the future. Limited understanding of combustion processes surrounding the burning of the droplets restricts further technological development. This project is expected to enable progress in design tools for spray flame combustors operating on liquid fuels, including bio-fuels. The result will be lower pollutant emissions and lower the cost of design of new engines.Read moreRead less
Non-linear dynamics of magnetic bearing systems. The aim of this project is to gain a much deeper insight into the effects of non-linearities on the dynamic behavior and on the performance of active magnetic bearings(AMBs). This project will focus attention on stability analysis, bifurcation control, malfunction analysis, and nonlinear dynamic behavior. The expected outcomes are better understanding and prediction of nonlinear behavior and control of AMBs and improved guidelines for designing sa ....Non-linear dynamics of magnetic bearing systems. The aim of this project is to gain a much deeper insight into the effects of non-linearities on the dynamic behavior and on the performance of active magnetic bearings(AMBs). This project will focus attention on stability analysis, bifurcation control, malfunction analysis, and nonlinear dynamic behavior. The expected outcomes are better understanding and prediction of nonlinear behavior and control of AMBs and improved guidelines for designing safer and more effective AMBs.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE150100094
Funder
Australian Research Council
Funding Amount
$400,000.00
Summary
Development of a world-class facility for three dimensional dynamic testing. Development of a world-class facility for three dimensional dynamic testing: This project aims to establish a world-class facility for multi-directional dynamic testing. Currently there are no such facilities in Australia. The ability to recreate dynamic motion in all available degrees-of-freedom opens up enormous fields of research not currently possible in Australia. This includes such areas as vibration testing, mate ....Development of a world-class facility for three dimensional dynamic testing. Development of a world-class facility for three dimensional dynamic testing: This project aims to establish a world-class facility for multi-directional dynamic testing. Currently there are no such facilities in Australia. The ability to recreate dynamic motion in all available degrees-of-freedom opens up enormous fields of research not currently possible in Australia. This includes such areas as vibration testing, materials testing, biomechanics and human factors, blast and earthquake simulations, field robotics, automotive safety research, flight/vehicle simulation, and marine applications including sloshing of liquids and liquefaction of fines. In conjunction with a 3D laser doppler system this facility will be unique in the world for dynamic mechanical testing.Read moreRead less
Next generation nondestructive inspection using guided-wave mixing. This project aims to develop a novel approach for early damage detection. It relies on a systematic experimental investigation of nonlinear ultrasonic interaction between different input wave modes in the presence of damage, so as to identify optimal mode selections and operating parameters that will maximise the sensitivity to particular forms of structural damage. The effects of in-service loading on wave-mixing response, and ....Next generation nondestructive inspection using guided-wave mixing. This project aims to develop a novel approach for early damage detection. It relies on a systematic experimental investigation of nonlinear ultrasonic interaction between different input wave modes in the presence of damage, so as to identify optimal mode selections and operating parameters that will maximise the sensitivity to particular forms of structural damage. The effects of in-service loading on wave-mixing response, and non-contact detection suitable for hard-to-inspect surface conditions, will also be investigated. The new developments will help transform existing schedule-based maintenance practice to a condition-based maintenance paradigm, to achieve significant cost savings in maintenance.Read moreRead less