PREDICTING THE CLOGGING OF STORM WATER INFILTRATION SYSTEMS. Infiltration systems are widely used in sustainable management of stormwater in both urban and rural areas. They are also an integral part of large stormwater-harvesting facilities. However, they tend to fail due to clogging (infiltration medium gets filled by silt from runoff), and this phenomenon is far from being understood. The aim of this project is to develop a new prediction method of clogging of stormwater infiltration systems. ....PREDICTING THE CLOGGING OF STORM WATER INFILTRATION SYSTEMS. Infiltration systems are widely used in sustainable management of stormwater in both urban and rural areas. They are also an integral part of large stormwater-harvesting facilities. However, they tend to fail due to clogging (infiltration medium gets filled by silt from runoff), and this phenomenon is far from being understood. The aim of this project is to develop a new prediction method of clogging of stormwater infiltration systems. Extensive 1D and 2D laboratory experimental programmes will be carried out. Models of unit processes that occur in infiltration systems will be defined/developed and built into a physically based model of an infiltration system. This model could be used for reliable design of stormwater drainage and harvesting systems, bringing major benefits to the people of drier and more populated areas of Australia.Read moreRead less
Removal of Potential Impact of Pharmaceutical Active Compounds during Wastewater Treatment. The increasing application of antimicrobial compounds in pharmaceutical and personal care products (PPCPs) requires improved understanding of their impact on the environment. Wastewater treatment plants (WWTPs) are a major removal process, however little is known about why certain PPCPs are removed during wastewater treatment and other are not. The project aims to study the fate of PPCPs and the spread of ....Removal of Potential Impact of Pharmaceutical Active Compounds during Wastewater Treatment. The increasing application of antimicrobial compounds in pharmaceutical and personal care products (PPCPs) requires improved understanding of their impact on the environment. Wastewater treatment plants (WWTPs) are a major removal process, however little is known about why certain PPCPs are removed during wastewater treatment and other are not. The project aims to study the fate of PPCPs and the spread of bacterial resistance in wastewater treatment. Studies will compare the effects of different treatment processes, operational conditions and environmental factors on the removal and treatment of PPCPs. The outcome will be the development of more sustainable WWTPs design and operation in terms of PPCPs removal.Read moreRead less
Design Of Practical Passive Cooling Radiators Utilising Spectrally Selective Covers And Surfaces. Radiative cooling offers a means to cool buildings sustainably without complex and costly heat pumps or air conditioners. Units similar to solar panels can be designed with surfaces which radiate mostly into the 8 - 12 micron atmospheric window, which has a radiance much less than for other wavelengths. Commercial development has been limited by problems associated with the degradation, performance ....Design Of Practical Passive Cooling Radiators Utilising Spectrally Selective Covers And Surfaces. Radiative cooling offers a means to cool buildings sustainably without complex and costly heat pumps or air conditioners. Units similar to solar panels can be designed with surfaces which radiate mostly into the 8 - 12 micron atmospheric window, which has a radiance much less than for other wavelengths. Commercial development has been limited by problems associated with the degradation, performance or cost of radiator surfaces. This project seeks to improve both performance and durability with innovative use of alternative materials and sputtered coatings suitable for mass manufacture, and to test the outdoor performance of laboratory produced radiative plates.Read moreRead less
A landfill cover that generates electricity: a Microbial Fuel Cell application. Landfills account for over two per cent of Australia’s greenhouse emissions, dominating emissions from waste and wastewater. Methane emissions are inherent to landfills because waste cannot be permanently sealed until a landfill cell is full. In this project, a microbial fuel cell (MFC) landfill cover will be developed as a means of achieving full biogas capture, from the time that waste is placed. The MFC cover syst ....A landfill cover that generates electricity: a Microbial Fuel Cell application. Landfills account for over two per cent of Australia’s greenhouse emissions, dominating emissions from waste and wastewater. Methane emissions are inherent to landfills because waste cannot be permanently sealed until a landfill cell is full. In this project, a microbial fuel cell (MFC) landfill cover will be developed as a means of achieving full biogas capture, from the time that waste is placed. The MFC cover system would consist of a relatively thin and deformable granular graphite layer colonised by current generating methane oxidising microorganisms, overlain by a proton exchange membrane and steel mesh as the anode layer. The MFC cover will provide the benefit of power generation as well as more complete greenhouse gas mitigation. Read moreRead less
New technology for designing advanced surface textures. This project aims to develop new methods for the characterisation of advanced textures to aid the manufacturing industry. There is an increasing demand for surfaces with various texture patterns manufactured by modern industry. Thus, novel texture characterisation methods are needed. New methods will allow for optimisation of surface textures for example for improved energy efficiency, bone growth in artificial implants, and others.
Averting Disaster: New Ways to Assess Bushfire Risk and Building Integrity. This project aims to develop a new method of assessing bushfire risk and building integrity using drone-based advanced technologies and computational fluid dynamics based heat transfer modelling for buildings located in bushfire prone areas. This coupled approach will enable the evaluation of bushfire effects on buildings and provide pre-bushfire condition/risk assessments, and site-specific cost-effective remedial actio ....Averting Disaster: New Ways to Assess Bushfire Risk and Building Integrity. This project aims to develop a new method of assessing bushfire risk and building integrity using drone-based advanced technologies and computational fluid dynamics based heat transfer modelling for buildings located in bushfire prone areas. This coupled approach will enable the evaluation of bushfire effects on buildings and provide pre-bushfire condition/risk assessments, and site-specific cost-effective remedial actions to reduce or eliminate bushfire damage and mitigate the risks pre-bushfire season. The new method will be applied to three selected buildings through which further enhancements and validations can be achieved. This project will showcase how the selected buildings and their components can be made bushfire safe.Read moreRead less
Adverse effects of sopite syndrome on occupants in wind-excited buildings. Current building motion design guidelines focus primarily on motion perception and complaint rates. However, wind-induced building motion can cause sopite syndrome or early onset motion sickness which adversely affects occupant wellbeing and work performance. This research aims to advance the understanding of the physiology of sopite syndrome, quantify the motion dosage that causes sopite syndrome and determine its advers ....Adverse effects of sopite syndrome on occupants in wind-excited buildings. Current building motion design guidelines focus primarily on motion perception and complaint rates. However, wind-induced building motion can cause sopite syndrome or early onset motion sickness which adversely affects occupant wellbeing and work performance. This research aims to advance the understanding of the physiology of sopite syndrome, quantify the motion dosage that causes sopite syndrome and determine its adverse effects on building occupants in real-world motion environments. This knowledge is expected to guide the formulation of building motion acceptability criteria based on safe motion exposure duration to facilitate the design of tall building that promotes population health and wellbeing and lifts work performance and productivity.Read moreRead less
Retrofitted brick masonry buildings - are they reliable over the long term? The aim of this project is to investigate the long-term reliability of a new earthquake strengthening technique for brick buildings. The technique involves the use of fibre reinforced polymer (FRP) strips as reinforcement for brick walls and has been shown to give substantial instantaneous strength increases. However, no research has been undertaken to ensure that the improved strength is sustained over the remaining lif ....Retrofitted brick masonry buildings - are they reliable over the long term? The aim of this project is to investigate the long-term reliability of a new earthquake strengthening technique for brick buildings. The technique involves the use of fibre reinforced polymer (FRP) strips as reinforcement for brick walls and has been shown to give substantial instantaneous strength increases. However, no research has been undertaken to ensure that the improved strength is sustained over the remaining life of the building. The only related research involves reinforced concrete which suggests that a reduction of at least 33 per cent could be expected. Hence, this project will quantify the long-term strength of FRP reinforced brickwork to enable engineers to safely apply this new cost-effective retrofit technique.Read moreRead less
Advanced Particles and Systems for Photoinduced Processes. One of the most crucial challenges facing chemical scientists is the need for ecologically clean chemical processes and technology. Solar induced processes, such as photocatalysis, are adept at utilising more of our natural energy resources. However, these processes currently suffer from low efficiencies. The proposed research aims to address these issues. Successful implementation of this technology will help place Australian research a ....Advanced Particles and Systems for Photoinduced Processes. One of the most crucial challenges facing chemical scientists is the need for ecologically clean chemical processes and technology. Solar induced processes, such as photocatalysis, are adept at utilising more of our natural energy resources. However, these processes currently suffer from low efficiencies. The proposed research aims to address these issues. Successful implementation of this technology will help place Australian research at the forefront of sustainable methods for water treatment and material synthesis for functional applications. This will provide economic and social benefits due to improvements in processes with higher efficiencies and greater use of clean, natural resources.
Read moreRead less
Collapse assessment of reinforced concrete buildings in regions of lower seismicity. This research aims to develop a new displacement based (DB) method for regions of lower seismicity, using 'Displacement Controlled' phenomenon, to assess the risk of collapse and seismic performance of buildings. The project will investigate the system behaviour of buildings in Australia that are laterally supported by lightly reinforced concrete geometric walls, including both torsional and wall floor interacti ....Collapse assessment of reinforced concrete buildings in regions of lower seismicity. This research aims to develop a new displacement based (DB) method for regions of lower seismicity, using 'Displacement Controlled' phenomenon, to assess the risk of collapse and seismic performance of buildings. The project will investigate the system behaviour of buildings in Australia that are laterally supported by lightly reinforced concrete geometric walls, including both torsional and wall floor interaction effects. The new DB method could allow buildings in regions of lower seismicity to be designed for robustness, gravity and wind loading and then checked using displacement principles for seismic compliance, which will dramatically simplify and improve the current seismic design process.Read moreRead less