Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0560735
Funder
Australian Research Council
Funding Amount
$139,194.00
Summary
A Signal Simulation Facility for GNSS Receiver Design and Testing. The proposed Facility comprises a Global Navigation Satellite System (GNSS) RF Signal Simulator which allows laboratory testing of new signal tracking and navigation solution algorithms, under different scenarios. Simulation of the operation of current and future GPS satellites, and of the new European GNSS "Galileo", is vital for testing new receiver designs. For example, the Facility could be programmed to generate a GPS satell ....A Signal Simulation Facility for GNSS Receiver Design and Testing. The proposed Facility comprises a Global Navigation Satellite System (GNSS) RF Signal Simulator which allows laboratory testing of new signal tracking and navigation solution algorithms, under different scenarios. Simulation of the operation of current and future GPS satellites, and of the new European GNSS "Galileo", is vital for testing new receiver designs. For example, the Facility could be programmed to generate a GPS satellite signal with user-selectable physical variations in the signal path, including the presence of RF jamming sources, high atmospheric disturbances, diffraction effects and multipath. As many of the signal variations are rare and/or unpredictable, the Signal Simulator is the only means to carry out such tests.Read moreRead less
Remote Sensing Based on Indirect GPS Signals. It is intended to utilize signals from the GPS satellite system, reflected from stationary objects (walls and water surfaces), to detect deformation or changed surface characteristics using the bistatic radar principle. The GPS receiving system consists of one or more signal detection components with antennas, as well as a processing device. The main objectives of the research are: the estimation of the power budget, developing techniques for system ....Remote Sensing Based on Indirect GPS Signals. It is intended to utilize signals from the GPS satellite system, reflected from stationary objects (walls and water surfaces), to detect deformation or changed surface characteristics using the bistatic radar principle. The GPS receiving system consists of one or more signal detection components with antennas, as well as a processing device. The main objectives of the research are: the estimation of the power budget, developing techniques for system modelling, developing techniques for simultaneous reception of signals from different satellites, and processing these signals with the aim of improving the spatial resolution, development of a demonstrator system, and evaluation of the system for selected remote sensing tasks.
Read moreRead less
Fundamentals of active sensor network for damage identification in engineering structures. The development of active sensor network techniques for Australia's vast civil and defence infrastructure will improve operational safety, reduce maintenance costs and extend the residual life of many of our engineered assets. The resulting cost-efficiencies will advantage Australian producers in competitive global markets; our companies will be well placed to produce and install active sensor network tech ....Fundamentals of active sensor network for damage identification in engineering structures. The development of active sensor network techniques for Australia's vast civil and defence infrastructure will improve operational safety, reduce maintenance costs and extend the residual life of many of our engineered assets. The resulting cost-efficiencies will advantage Australian producers in competitive global markets; our companies will be well placed to produce and install active sensor network techniques and to provide training in the associated asset management systems. Australian industry will have a unique opportunity to collaborate with the world-class research networks on emerging areas such as damage diagnosis, prognosis and control, and structural repair.Read moreRead less
Spectral analysis with selective harmonic emphasis. This project lies under ARC research priority area "Frontier Technologies for Building and Transforming Australian Industries". The signal processing algorithms to be developed in this project will be useful in many important practical applications, which include various bio-medical imaging modalities, beamforming, radar, sonar and target tracking using sensor arrays. The idea is to use the prior knowledge to enhance certain desired properties ....Spectral analysis with selective harmonic emphasis. This project lies under ARC research priority area "Frontier Technologies for Building and Transforming Australian Industries". The signal processing algorithms to be developed in this project will be useful in many important practical applications, which include various bio-medical imaging modalities, beamforming, radar, sonar and target tracking using sensor arrays. The idea is to use the prior knowledge to enhance certain desired properties of the algorithms via intelligent processing. In this light the project also lies within the ARC research priority area of "Smart Information use".Read moreRead less
Fundamentals of Damage Identification in Tubular Structures Using Guided Waves. This project addresses fundamental but frontier issues and techniques that will lead to ultimate solutions for online integrity/safety assessment of tubular engineering structures. The most important outcome will be the development of fundamental knowledge and algorithms of guided wave-based damage identification in tubular structures in applications, putting Australia at the international forefront of techniques in ....Fundamentals of Damage Identification in Tubular Structures Using Guided Waves. This project addresses fundamental but frontier issues and techniques that will lead to ultimate solutions for online integrity/safety assessment of tubular engineering structures. The most important outcome will be the development of fundamental knowledge and algorithms of guided wave-based damage identification in tubular structures in applications, putting Australia at the international forefront of techniques in efficient asset maintenance and management. This project focuses on cutting-edge technologies, including sensor networks with signal filtering/processing and software/hardware integration, which will incubate the commercialisation of practical sensor networks, benefiting the intellectual leadership of Australia.Read moreRead less
The development of new techniques for partial discharge monitoring and location in high voltage underground power cables. Increased utilization factors have caused a significant increase in the loading of high voltage distribution cables. This increased loading subjects cable insulation to increased stress which can degrade the insulation, cause cable failure and power loss to consumers. On-line cable insulation monitoring is required and partial discharge monitoring in cables provides a viable ....The development of new techniques for partial discharge monitoring and location in high voltage underground power cables. Increased utilization factors have caused a significant increase in the loading of high voltage distribution cables. This increased loading subjects cable insulation to increased stress which can degrade the insulation, cause cable failure and power loss to consumers. On-line cable insulation monitoring is required and partial discharge monitoring in cables provides a viable technique, but technical problems have prevented its application in on-line operation.
This project will develop techniques for such on-line monitoring. High frequency electrical sensors will be used to reduce interference and improve signal levels. Both a coarse alarm and a higher sensitivity monitor will be developed.
Read moreRead less
Non-invasive measurement of intracranial pressure by means of transcranial doppler blood flow and central aortic pressure. The investigation will produce a device that will aid doctors measuring brain pressure without drilling holes through the skull. The device will use the technology of an Australian company that has the only patented system to deduce the pressure in the brain by measuring pressure close to the heart and the brain and by recording the pressure pulse wave at the wrist. The comm ....Non-invasive measurement of intracranial pressure by means of transcranial doppler blood flow and central aortic pressure. The investigation will produce a device that will aid doctors measuring brain pressure without drilling holes through the skull. The device will use the technology of an Australian company that has the only patented system to deduce the pressure in the brain by measuring pressure close to the heart and the brain and by recording the pressure pulse wave at the wrist. The community benefit will be in terms of the safety and ease with which changes in pressure in the brain can be detected. It will also advance the world renowned Australian technology in a new area of application.Read moreRead less
Guaranteeing the safety of short welds in automotive applications. Most safety-critical welds in the automotive and related industries are of short duration (less than three seconds). We will develop a unified theoretical model of short welds which accounts for all important phenomena. Using this model, we will create the first system to check every safety-critical weld in real time, with 3D data objects that use all the data available from the non-stationary process. The outcomes will be a comp ....Guaranteeing the safety of short welds in automotive applications. Most safety-critical welds in the automotive and related industries are of short duration (less than three seconds). We will develop a unified theoretical model of short welds which accounts for all important phenomena. Using this model, we will create the first system to check every safety-critical weld in real time, with 3D data objects that use all the data available from the non-stationary process. The outcomes will be a comprehensive understanding of short welds, which will be an essential step towards the development of more reliable welding procedures, and a weld fault monitor ready for industrial application.Read moreRead less
Robust Positioning Based on Ultra-Tight Integration of GPS, Pseudolites and Inertial Sensors. The Global Positioning System (GPS) has been becoming an increasingly important part of the world-wide geo-spatial information infrastructure. However, the availability and reliability of GPS positioning are still major challenging issues. This project proposes a new concept of robust positioning based on the ultra-tight integration of GPS, pseudolites and inertial sensor. The expected outcomes include: ....Robust Positioning Based on Ultra-Tight Integration of GPS, Pseudolites and Inertial Sensors. The Global Positioning System (GPS) has been becoming an increasingly important part of the world-wide geo-spatial information infrastructure. However, the availability and reliability of GPS positioning are still major challenging issues. This project proposes a new concept of robust positioning based on the ultra-tight integration of GPS, pseudolites and inertial sensor. The expected outcomes include: 1) a novel sensor integration approach, 2) innovative smart antenna design, 3) efficient algorithms and quality control procedures for signal acquisition and tracking, which can effectively suppress interferences and enhance the weak signal tracking.Read moreRead less
Classification of human movement patterns from a triaxial accelerometer for home telecare. The purpose of the proposed ambulatory monitoring system is to ensure that a community-dwelling elderly person receives automatic, timely aid in the event of an adverse situation while alone at home, such as a fall or stroke. This project is aimed at the priority area 'ageing well, ageing productively'. Providing rapid assistance after a fall will prevent much of the morbidity, distress and socio-economic ....Classification of human movement patterns from a triaxial accelerometer for home telecare. The purpose of the proposed ambulatory monitoring system is to ensure that a community-dwelling elderly person receives automatic, timely aid in the event of an adverse situation while alone at home, such as a fall or stroke. This project is aimed at the priority area 'ageing well, ageing productively'. Providing rapid assistance after a fall will prevent much of the morbidity, distress and socio-economic cost that are associated with falls. Specifically, this project brings new advanced digital signal processing algorithms to bear on the difficult signal enhancement and classification problems associated with the information stream received from the triaxial accelerometer worn by the elderly client.Read moreRead less