Design Of Practical Passive Cooling Radiators Utilising Spectrally Selective Covers And Surfaces. Radiative cooling offers a means to cool buildings sustainably without complex and costly heat pumps or air conditioners. Units similar to solar panels can be designed with surfaces which radiate mostly into the 8 - 12 micron atmospheric window, which has a radiance much less than for other wavelengths. Commercial development has been limited by problems associated with the degradation, performance ....Design Of Practical Passive Cooling Radiators Utilising Spectrally Selective Covers And Surfaces. Radiative cooling offers a means to cool buildings sustainably without complex and costly heat pumps or air conditioners. Units similar to solar panels can be designed with surfaces which radiate mostly into the 8 - 12 micron atmospheric window, which has a radiance much less than for other wavelengths. Commercial development has been limited by problems associated with the degradation, performance or cost of radiator surfaces. This project seeks to improve both performance and durability with innovative use of alternative materials and sputtered coatings suitable for mass manufacture, and to test the outdoor performance of laboratory produced radiative plates.Read moreRead less
Tailoring the functionality of microstructured polymer optical fibres. Australia leads the world in microstructured polymer optical fibre (mPOF) research that has attracted serious commercial interest from multinational companies. A series of ATSE funded workshops in Europe during 2004 strongly indicated that the incorporation of a range of additional functionalities within novel fibres is the right path to follow to maintain research momentum and leadership. This interdisciplinary project offer ....Tailoring the functionality of microstructured polymer optical fibres. Australia leads the world in microstructured polymer optical fibre (mPOF) research that has attracted serious commercial interest from multinational companies. A series of ATSE funded workshops in Europe during 2004 strongly indicated that the incorporation of a range of additional functionalities within novel fibres is the right path to follow to maintain research momentum and leadership. This interdisciplinary project offers a clear route to expanded collaboration in both Australia and overseas thus ensuring that the OFTC retains its research and technological edge into the future whilst helping to satisfy the demand for students trained in leading-edge photonics.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0775598
Funder
Australian Research Council
Funding Amount
$1,000,000.00
Summary
High-Resolution Transmission Electron Tomographic Facility for Nanoanalytical Characterisation in the Life and Material Sciences. The requested instrument will allow researchers in New South Wales to (i) visualize biological and physical samples in three-dimensions by electron tomography and modeling and (ii) image samples in a near-natural state and at high-resolution by cryogenic techniques. This essential research platform will provide novel information that faithfully presents both the surfa ....High-Resolution Transmission Electron Tomographic Facility for Nanoanalytical Characterisation in the Life and Material Sciences. The requested instrument will allow researchers in New South Wales to (i) visualize biological and physical samples in three-dimensions by electron tomography and modeling and (ii) image samples in a near-natural state and at high-resolution by cryogenic techniques. This essential research platform will provide novel information that faithfully presents both the surface and internal structure of samples down to the nanometre scale, enabling structural research to the highest scientific standards. The resulting knowledge is essential to diverse areas that range from development of cures to diabetes and cancer to creation of environmentally-friendly industrial catalysts to design of new nanoparticles and biosensors.Read moreRead less
An innovative manufacturing technology enabling new generations of hip joint prostheses. The success of the present project will revolutionise the way we produce hip joint prostheses, resolve the critical issues caused by the wear of the hip joint bearing surfaces, and dramatically improve patients' life quality. The project will open an entirely new application field for the Australian made materials which have a very limited market so far. With the innovative technology and the new generations ....An innovative manufacturing technology enabling new generations of hip joint prostheses. The success of the present project will revolutionise the way we produce hip joint prostheses, resolve the critical issues caused by the wear of the hip joint bearing surfaces, and dramatically improve patients' life quality. The project will open an entirely new application field for the Australian made materials which have a very limited market so far. With the innovative technology and the new generations of hip joint prostheses, the international competitive edge of the Australian industry will be markedly sharpened. Patients, and the Australian economy, are expected to benefit greatly from successful developments in this project.Read moreRead less
Special Research Initiatives - Grant ID: SR0354805
Funder
Australian Research Council
Funding Amount
$10,000.00
Summary
Research Network for Rehabilitation of Structures Using Advanced Materials and Frontier Technologies. There is an urgent need to rehabilitate existing structures that are considered inadequate in strength and serviceability. Frontier strengthening technologies (such as external post-tensioning and plate bonding) using conventional and advanced materials are being currently developed in Australia by different groups, but as yet not in a coordinated manner. The aim of this network is to bring tog ....Research Network for Rehabilitation of Structures Using Advanced Materials and Frontier Technologies. There is an urgent need to rehabilitate existing structures that are considered inadequate in strength and serviceability. Frontier strengthening technologies (such as external post-tensioning and plate bonding) using conventional and advanced materials are being currently developed in Australia by different groups, but as yet not in a coordinated manner. The aim of this network is to bring together a multi-disciplinary team with complementary strengths to provide an integrated solution for rehabilitation of structures. The core of the network focuses on design tools, linking the various technologies to provide appropriate rehabilitation and understanding of life cycle demands for major infrastructure.Read moreRead less
Crack Propagation within Graded Interfaces. Functionally graded interfaces are a technologically new way of joining materials in a wide range of biomedical and industrial applications. The reduction in the interfacial stresses resulting from the graded interface increases the structural integrity of the component, however, existing models do not fully address issues of plasticity and cyclic fatigue to their fracture. The intention of this study is to investigate how modifications to the ductil ....Crack Propagation within Graded Interfaces. Functionally graded interfaces are a technologically new way of joining materials in a wide range of biomedical and industrial applications. The reduction in the interfacial stresses resulting from the graded interface increases the structural integrity of the component, however, existing models do not fully address issues of plasticity and cyclic fatigue to their fracture. The intention of this study is to investigate how modifications to the ductile reinforcement phase and how the cyclic loading influence crack extension within a graded interface. These results will assist in future design and prediction of the in-service lifetime of components containing gradient interfaces.Read moreRead less
Some Outstanding Mechanics Problems in Layered Ferroelectromagnetic Composites with Enhanced Magnetoelectric Effect. The proposed research has high impact on both science and technology of ferroelectromagnetic materials. The outcomes will expand Australia's knowledge base and research capability in this emerging field. Relevant industries, such as smart materials and devices, can benefit from the results of this project. The theoretical, experimental and numerical results can be directly transfo ....Some Outstanding Mechanics Problems in Layered Ferroelectromagnetic Composites with Enhanced Magnetoelectric Effect. The proposed research has high impact on both science and technology of ferroelectromagnetic materials. The outcomes will expand Australia's knowledge base and research capability in this emerging field. Relevant industries, such as smart materials and devices, can benefit from the results of this project. The theoretical, experimental and numerical results can be directly transformed to design and application guidelines for the materials engineers and scientists to develop innovative and structurally/functionally reliable ferroelectromagnetic composites and their various devices and products.Read moreRead less
Long-term behaviour of thin-walled concrete curved members strengthened with externally bonded composite materials. Concrete arches and domes are prone to catastrophic failures which involve loss of life and limb, and many global iconic structures are of this form. When subjected to creep, shrinkage and thermal effects, their behaviour is non-linear and complex. This proposal will keep Australian research at the forefront by developing a fundamental understanding of these structural forms over t ....Long-term behaviour of thin-walled concrete curved members strengthened with externally bonded composite materials. Concrete arches and domes are prone to catastrophic failures which involve loss of life and limb, and many global iconic structures are of this form. When subjected to creep, shrinkage and thermal effects, their behaviour is non-linear and complex. This proposal will keep Australian research at the forefront by developing a fundamental understanding of these structural forms over time, when strengthened with externally-bonded composite materials in an innovative retrofit procedure. It encompasses the priority goal of frontier technologies for building and transforming Australian industry, will lead to valuable guidance for engineers, and will contribute to the training of skilled PhD scholars.Read moreRead less
Towards new generations of lubricants using nanoparticles. Engines are essential to the Australian manufacturing, transport, power generation, mining and construction industries. Our project will develop the basic science for high-performance lubricants and wear-resistant materials using nanoparticles. These lubricants and materials will have a significant impact in reducing system failure from the chronic wear and friction of moving parts and optimise the cost structures of system manufacturing ....Towards new generations of lubricants using nanoparticles. Engines are essential to the Australian manufacturing, transport, power generation, mining and construction industries. Our project will develop the basic science for high-performance lubricants and wear-resistant materials using nanoparticles. These lubricants and materials will have a significant impact in reducing system failure from the chronic wear and friction of moving parts and optimise the cost structures of system manufacturing.Read moreRead less
A Fundamental Study Of The Behaviour Of Clay Brick Fines In Autoclaved Calcium Silicate Based Building Products. Clay brick fines constitute a significant proportion of Construction and Demolition waste, the disposal of which is a recognised global problem. This project aims to provide a fundamental understanding of the behaviour of clay brick fines in autoclaved calcium silicate based building products. Current practice of manufacture of these widely produced building materials does not use cla ....A Fundamental Study Of The Behaviour Of Clay Brick Fines In Autoclaved Calcium Silicate Based Building Products. Clay brick fines constitute a significant proportion of Construction and Demolition waste, the disposal of which is a recognised global problem. This project aims to provide a fundamental understanding of the behaviour of clay brick fines in autoclaved calcium silicate based building products. Current practice of manufacture of these widely produced building materials does not use clay brick fines due to a lack of technical information on this renewable resource material. Findings of this study will provide a benchmark for the development of new generation building products worldwide utlilising clay brick fines.Read moreRead less