Airborne spatial tracking to save endangered species. Airborne spatial tracking to save endangered species. This project aims to develop an automated and distributed spatial tracking approach using low cost Unmanned Aerial Vehicles (UAVs) to locate and study endangered wildlife. Understanding animal behaviour and habits with granular spatial data is essential to develop effective monitoring and conservation strategies. Spatial tracking of radio collared wildlife using radio telemetry is a critic ....Airborne spatial tracking to save endangered species. Airborne spatial tracking to save endangered species. This project aims to develop an automated and distributed spatial tracking approach using low cost Unmanned Aerial Vehicles (UAVs) to locate and study endangered wildlife. Understanding animal behaviour and habits with granular spatial data is essential to develop effective monitoring and conservation strategies. Spatial tracking of radio collared wildlife using radio telemetry is a critical but costly tool for acquiring this data. This project anticipates that airborne spatial tracking using intelligent spatial tracking algorithms on board low cost UAV teams will allow more precise understanding of wildlife for evidence-based conservation and management in a changing global climate.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE160101293
Funder
Australian Research Council
Funding Amount
$350,000.00
Summary
Nanoporous Iron-Based Oxygen Evolution Electrocatalysts for Water Splitting. This project aims to develop high-performance water splitting devices based on nanoporous iron-based oxygen evolution electrocatalysts. The devices, which will produce hydrogen to relieve the energy shortage in Australia, can be powered by photovoltaic and wind-generated electricity or directly use solar energy. The development of new energy materials that can be used to make renewable and clean fuels from abundant and ....Nanoporous Iron-Based Oxygen Evolution Electrocatalysts for Water Splitting. This project aims to develop high-performance water splitting devices based on nanoporous iron-based oxygen evolution electrocatalysts. The devices, which will produce hydrogen to relieve the energy shortage in Australia, can be powered by photovoltaic and wind-generated electricity or directly use solar energy. The development of new energy materials that can be used to make renewable and clean fuels from abundant and easily accessible resources is among the most challenging and demanding tasks today. The combination of iron doping and nanoporous structure are intended to improve both the intrinsic and extrinsic catalytic activities of the electrocatalysts to be developed in the project.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE150101306
Funder
Australian Research Council
Funding Amount
$365,000.00
Summary
Porous Metal Phosphonate Ion Exchange Membranes for Redox Flow Batteries. The high-performance storage and utilisation of renewable energy, such as solar and wind energy, will provide a direct response to Australia's energy and climate issues. This project aims to develop porous metal phosphonate ion exchange membranes, which can be used in the redox flow battery, one of the most powerful, large-scale energy storage devices, with large capacity, high efficiency, long life and low cost. The proje ....Porous Metal Phosphonate Ion Exchange Membranes for Redox Flow Batteries. The high-performance storage and utilisation of renewable energy, such as solar and wind energy, will provide a direct response to Australia's energy and climate issues. This project aims to develop porous metal phosphonate ion exchange membranes, which can be used in the redox flow battery, one of the most powerful, large-scale energy storage devices, with large capacity, high efficiency, long life and low cost. The project aims to improve the overall performance and fabrication of redox flow batteries, promote capacity and efficiency, and reduce the cost of renewable energy storage thereby benefiting the Australian economy and environment.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE120102052
Funder
Australian Research Council
Funding Amount
$375,000.00
Summary
Resolving flame stabilisation mechanisms in the transition to moderate or intense low oxygen dilution (MILD) combustion. Next-generation combustion technologies are required in the transition to more efficient, and less polluting, energy production. This project will address the important issue of understanding flame stabilisation on a fundamental level to facilitate the design and development of more efficient and sustainable combustion systems.
High power density, low cogging torque and low-cost micro-scale wind turbine generator system utilising soft magnetic composite materials. This project will develop a low-cost, high-performance and high-ef?ciency micro-scale wind turbine generator using a new magnetic material consisting of iron powder, which can be easily pressed into any desirable shape. This allows considerably simpli?ed manufacturing, greater design ?exibility and ease of scaling to higher output powers.
Solutions for rapid penetration into sand for offshore energy installations. This project aims to develop a fundamental understanding of the response of saturated sand in seabeds during rapid penetration by offshore site investigation tools and foundation construction. The research is using innovative physical and advanced numerical modelling techniques to quantify the significant increase in sand resistance caused by rapid penetration, enabling reliable design and reducing risk of material fail ....Solutions for rapid penetration into sand for offshore energy installations. This project aims to develop a fundamental understanding of the response of saturated sand in seabeds during rapid penetration by offshore site investigation tools and foundation construction. The research is using innovative physical and advanced numerical modelling techniques to quantify the significant increase in sand resistance caused by rapid penetration, enabling reliable design and reducing risk of material failure associated with the high impact forces. Expected outcomes of the project include a conceptual framework and scientific-based design tool to predict the geotechnical performance of offshore installations. The research will provide the necessary scientific advances to install, moor and service offshore wind and wave energy devices more economically and efficiently.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE150100030
Funder
Australian Research Council
Funding Amount
$270,000.00
Summary
Test-bed for Wide-Area Software Defined Networking Research. Test bed for wide-area software defined networking research: This project aims to develop a wide-area test bed, spanning ten organisations, for conducting research and experimentation in the emerging disruptive technology of Software Defined Networking (SDN). SDN is likely to bring long-term transformation to the networking industry, much like cloud computing did, by enabling dynamic virtualised elastic network services under software ....Test-bed for Wide-Area Software Defined Networking Research. Test bed for wide-area software defined networking research: This project aims to develop a wide-area test bed, spanning ten organisations, for conducting research and experimentation in the emerging disruptive technology of Software Defined Networking (SDN). SDN is likely to bring long-term transformation to the networking industry, much like cloud computing did, by enabling dynamic virtualised elastic network services under software control. The test bed will empower Australian researchers in network technologies and dependent applications (for example, multimedia and security) to collaboratively develop and demonstrate novel ideas at scale. This is expected to benefit Australia by giving our researchers international recognition in this nascent area, and developing a national talent pool for local industry.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE170100137
Funder
Australian Research Council
Funding Amount
$358,275.00
Summary
Integrated thin film facility for catalysis and energy materials research. This project aims to establish thin film fabrication with catalytic/gas sorption characterisation needed for energy research. This project will overcome current limitations in advanced energy materials design via wet chemical methods. It will enable materials synthesis and characterisation toward thermal/photo/electro-catalytic, hydrogen storage, and battery technologies. The facility is expected to drive fundamental conc ....Integrated thin film facility for catalysis and energy materials research. This project aims to establish thin film fabrication with catalytic/gas sorption characterisation needed for energy research. This project will overcome current limitations in advanced energy materials design via wet chemical methods. It will enable materials synthesis and characterisation toward thermal/photo/electro-catalytic, hydrogen storage, and battery technologies. The facility is expected to drive fundamental concepts, and enable combinatorial search and new thin film technology. It is anticipated that this facility will increase Australia’s international competitiveness in the development of advanced energy materials.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE130100127
Funder
Australian Research Council
Funding Amount
$400,000.00
Summary
Controlled radiation facility to investigate turbulence-radiation-chemistry interactions in high-flux solar reactors. This project's facility will support the transition of Australia’s energy intensive industries, including minerals and resources, to a much lower carbon intensity. It will also underpin collaborations with internationally leading partners to develop novel solar-combustion hybrid reactors for the production of solar fuels and for minerals processing.
Blue energy harvesting and storage technology for wearable electronics. This project aims to develop new self-charging power devices that can harvest and store body energy generated during body motions, and power smart and implantable medical electronics. The project will develop new Piezo-supercapacitors by designing new electrode materials and cell designs. The charge storage and transport kinetics will be uncovered using advanced in-situ characterisation techniques and modern simulation metho ....Blue energy harvesting and storage technology for wearable electronics. This project aims to develop new self-charging power devices that can harvest and store body energy generated during body motions, and power smart and implantable medical electronics. The project will develop new Piezo-supercapacitors by designing new electrode materials and cell designs. The charge storage and transport kinetics will be uncovered using advanced in-situ characterisation techniques and modern simulation methods. The project expects to generate new knowledge in blue energy harvesting and storage systems, training for young scientists, and generate intellectual property with potential commercialised products to be used in implantable devices, placing Australia at the forefront of new technology.Read moreRead less