A thermal battery for dish-Stirling concentrated solar power systems. This project will investigate new high temperature (> 600 degrees Celsius) metal hydrides and carbonates suitable for thermochemical energy storage in dish-Stirling Concentrated Solar Power systems. The intended outcome is to discover cost effective, energy dense materials that are capable of operating over a 30 year life span in a solar power plant. This will enable 24/7 electricity production from renewable sources in a disp ....A thermal battery for dish-Stirling concentrated solar power systems. This project will investigate new high temperature (> 600 degrees Celsius) metal hydrides and carbonates suitable for thermochemical energy storage in dish-Stirling Concentrated Solar Power systems. The intended outcome is to discover cost effective, energy dense materials that are capable of operating over a 30 year life span in a solar power plant. This will enable 24/7 electricity production from renewable sources in a dispatchable solar platform, ideal for remote locations. The successful development of high temperature metal hydrides and carbonates will finally provide an energy storage solution to dish-Stirling Concentrated Solar Power systems, which will greatly reduce our reliance on fossil fuels to produce electricity.Read moreRead less
Control of Thermodiffusion in Liquid Multicomponent Alloys. Aims: The project aims to comprehensively study heat and mass coupling in liquid alloys by describing it mathematically, measuring it experimentally and calculating it by simulation. Significance: When a liquid alloy exists at different temperatures, the coupling of heat and mass flows causes rapid segregation of its components. This is a major complication in controlling solidification from liquid alloys in manufacturing and in the des ....Control of Thermodiffusion in Liquid Multicomponent Alloys. Aims: The project aims to comprehensively study heat and mass coupling in liquid alloys by describing it mathematically, measuring it experimentally and calculating it by simulation. Significance: When a liquid alloy exists at different temperatures, the coupling of heat and mass flows causes rapid segregation of its components. This is a major complication in controlling solidification from liquid alloys in manufacturing and in the design of liquid alloy coolants for efficient heat transfer. It has never been addressed. Expected outcomes: This research is expected to be the pioneering foundation of the area. Benefits: It is anticipated that the research would provide the means to properly control the engineering use of liquid alloys. Read moreRead less
Bulk Mg based hydrogen storage alloys with faster activation. Bulk Mg based hydrogen storage alloys with faster activation. This project aims to improve the performance and efficiency of manufacture of magnesium-based hydrogen storage alloys, making them more cost competitive and widely useable. A hydrogen economy will reduce greenhouse gas emissions and improve air quality in urban areas. The expected outcomes are an understanding of the mechanisms governing the activation process, a necessary ....Bulk Mg based hydrogen storage alloys with faster activation. Bulk Mg based hydrogen storage alloys with faster activation. This project aims to improve the performance and efficiency of manufacture of magnesium-based hydrogen storage alloys, making them more cost competitive and widely useable. A hydrogen economy will reduce greenhouse gas emissions and improve air quality in urban areas. The expected outcomes are an understanding of the mechanisms governing the activation process, a necessary step in manufacture, and techniques to exploit these mechanisms to minimise the activation time. This is expected to develop competitive, bulk magnesium-based hydrogen storage alloys for effective and safe hydrogen storage systems.Read moreRead less
metal hydride reactors for high temperature thermochemical heat storage. The aim of this project is to develop a laboratory-based prototype for energy storage in concentrating solar power (CSP) systems using metal hydrides as a chemical energy storage medium. The successful development of cost-effective energy storage technologies is expected to dramatically increase the deployability of CSP systems and this, in turn, will greatly enhance our capacity to reduce reliance on fossil fuels. The outc ....metal hydride reactors for high temperature thermochemical heat storage. The aim of this project is to develop a laboratory-based prototype for energy storage in concentrating solar power (CSP) systems using metal hydrides as a chemical energy storage medium. The successful development of cost-effective energy storage technologies is expected to dramatically increase the deployability of CSP systems and this, in turn, will greatly enhance our capacity to reduce reliance on fossil fuels. The outcomes of the project are planned to be used towards the development of a commercially viable solar thermal energy storage system. The project also plans to conduct fundamental research into the development of new high-temperature metal hydrides suitable for energy storage in CSP systems.Read moreRead less
Concentrating solar thermal energy storage using metal hydrides. This project will investigate energy storage for concentrating solar thermal energy systems. These systems can be used to efficiently generate electricity in remote locations, day and night, using solar energy. The solar energy is converted to heat energy and then chemical energy stored in a metal-hydrogen compound.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE180100168
Funder
Australian Research Council
Funding Amount
$264,706.00
Summary
A glow discharge optical emission spectrometer for challenging surfaces. This project aims to address a critical surface characterisation gap in Australian research by the implementation of a glow-discharge optical emission spectrometer. Determining the composition depth profile of chemically complex surfaces that are rough, fragile, and air-sensitive is very challenging. The project will allow rapid and accurate elemental depth profiling of surface layers up to hundreds of microns in thickness ....A glow discharge optical emission spectrometer for challenging surfaces. This project aims to address a critical surface characterisation gap in Australian research by the implementation of a glow-discharge optical emission spectrometer. Determining the composition depth profile of chemically complex surfaces that are rough, fragile, and air-sensitive is very challenging. The project will allow rapid and accurate elemental depth profiling of surface layers up to hundreds of microns in thickness and with nanometre resolution. Critically this instrument allows glovebox-to-instrument analysis without surface preparation, preserving the in-situ state of the surface. This will fast-track research in battery materials, new methods to control corrosion, and the design of advanced engineered surfaces.Read moreRead less
Sodium borohydride for solid-state green hydrogen export. This project aims to develop a new method of producing, storing, and exporting green hydrogen using Australian resources. Sodium borohydride will be produced from borax using renewable energy and exported internationally to countries that desire hydrogen from renewable sources to replace fossil fuels. Green hydrogen will be released from sodium borohydride by adding water. The spent material will then be shipped back to Australia for recy ....Sodium borohydride for solid-state green hydrogen export. This project aims to develop a new method of producing, storing, and exporting green hydrogen using Australian resources. Sodium borohydride will be produced from borax using renewable energy and exported internationally to countries that desire hydrogen from renewable sources to replace fossil fuels. Green hydrogen will be released from sodium borohydride by adding water. The spent material will then be shipped back to Australia for recycling back to sodium borohydride, creating a closed-loop energy cycle using renewable energy. This will create a new export industry in Australia by expanding current mining expertise whilst harnessing our wealth of renewable energy to potentially deliver billions of dollars of revenue.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE110100141
Funder
Australian Research Council
Funding Amount
$1,294,000.00
Summary
Facility for in-situ nuclear magnetic resonance of advanced materials and devices. This unique characterisation facility will support and enhance high-quality research in four key areas: electro-materials and nanotechnology, light metal alloys, biotechnology and energy related devices. This research will lead to new materials and new technologies in clean energy, carbon dioxide capture and health care.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE110100159
Funder
Australian Research Council
Funding Amount
$360,000.00
Summary
National facility for biased target deposition of alloyed nanolayers. This facility will enhance Australia's strengths and capabilities in fabricating structures, with applications in multiple research fields including opto-magneto-electronics, next generation lithium ion batteries and energy nanogenerators. It will enhance Australia's research profile as a leader in nanotechnology.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE140100071
Funder
Australian Research Council
Funding Amount
$220,000.00
Summary
In-situ elevated temperature nano-indentation. In-situ elevated temperature nano-indentation: Nano-indentation has revolutionised the characterisation of the mechanical properties of materials. It permits the elastic, plastic and cracking response to be probed at the nano-scale. This project will provide a state-of-the-art Hysitron nano-indenter configured to permit isothermal elevated temperature operation (up to 650 degrees Celsius). The unit will be the only one in Australia with this capabil ....In-situ elevated temperature nano-indentation. In-situ elevated temperature nano-indentation: Nano-indentation has revolutionised the characterisation of the mechanical properties of materials. It permits the elastic, plastic and cracking response to be probed at the nano-scale. This project will provide a state-of-the-art Hysitron nano-indenter configured to permit isothermal elevated temperature operation (up to 650 degrees Celsius). The unit will be the only one in Australia with this capability and amongst the few available globally. Temperature is the single most important parameter in material processing. This facility will permit the assembled team to be among the first in the world to apply this technique to the development of new materials with superior processing performance in addition to enhanced behaviour in service.Read moreRead less