Thermal-induced unilateral plate buckling of concrete pavements: design and evaluation. The project addresses the upheaval buckling of concrete pavements, which is caused by increasingly frequent heat spells. It will consider both the vulnerability assessment of existing pavements, and the design of new pavements made from low-carbon geopolymer concretes (which are lighter than conventional pavements) against upheaval buckling.
Composite steel-timber structural system. This project aims to deliver a novel composite steel–timber system that alleviates many of the environmental concerns of the industry, while improving efficiency by using lighter materials. It aims to develop a unique composite system comprised of steel I-section beams and prefabricated timber slabs, with shear connection being provided by bolting or screws. The project plans to assess the structural system experimentally and numerically, and to craft gu ....Composite steel-timber structural system. This project aims to deliver a novel composite steel–timber system that alleviates many of the environmental concerns of the industry, while improving efficiency by using lighter materials. It aims to develop a unique composite system comprised of steel I-section beams and prefabricated timber slabs, with shear connection being provided by bolting or screws. The project plans to assess the structural system experimentally and numerically, and to craft guidelines for the safe and efficient design of these members. The novel lightweight composite system would enhance the speed of construction, allow for deconstructability and reuse and, because plantation timber sequestrates carbon dioxide, have a low carbon footprint.Read moreRead less
Australian Laureate Fellowships - Grant ID: FL100100063
Funder
Australian Research Council
Funding Amount
$1,423,222.00
Summary
An Innovative and Advanced Systems Approach for Full Life-Cycle, Low-Emissions Composite and Hybrid Building Infrastructure. This project will develop a 'green' sustainable composite steel-concrete building frame system that reduces greenhouse gas emissions throughout the life-cycle of building construction, usage and deconstruction. It will eliminate the use of ordinary Portland cement, which is a major carbon dioxide producer, by using geopolymer concrete made from fly-ash, and will use econom ....An Innovative and Advanced Systems Approach for Full Life-Cycle, Low-Emissions Composite and Hybrid Building Infrastructure. This project will develop a 'green' sustainable composite steel-concrete building frame system that reduces greenhouse gas emissions throughout the life-cycle of building construction, usage and deconstruction. It will eliminate the use of ordinary Portland cement, which is a major carbon dioxide producer, by using geopolymer concrete made from fly-ash, and will use economic thin-walled, high-strength steel sections. Deconstructability is provided through bolted joints and by using tensioned bolts as shear connectors between the steel skeleton and concrete flooring. This project is underpinned by the extensive background of the candidate, and provides a very timely solution to a major contemporary engineering challenge facing Australia.Read moreRead less
Functionally graded modelling of geopolymer and Portland cement concretes. This project aims to investigate why geopolymer concretes crack less than the Portland cement concretes. Carbon emissions from Portland cement is second only to fossil fuels. Geopolymer may emit less carbon dioxide than Portland cement concrete because it bleeds less and has higher creep. The project will test this hypothesis on geopolymer and Portland cement concretes, and emulate its findings in all types of concretes. ....Functionally graded modelling of geopolymer and Portland cement concretes. This project aims to investigate why geopolymer concretes crack less than the Portland cement concretes. Carbon emissions from Portland cement is second only to fossil fuels. Geopolymer may emit less carbon dioxide than Portland cement concrete because it bleeds less and has higher creep. The project will test this hypothesis on geopolymer and Portland cement concretes, and emulate its findings in all types of concretes. The project intends to create a specific market for geopolymer by developing a crack-free pavement and floors technology, while understanding cracking in concrete will reduce cracking issues.Read moreRead less
Composite Structures of High-Strength Steel and Concrete. This project plans to investigate the use in building frames of composite steel-concrete members that use high-strength steel (HSS) instead of mild steel (MS). HSS is finding increased use in construction, and HSS has a much greater strength-to-weight ratio than MS, leading to lighter composite structures, less material usage and smaller foundations. Overall, this reduces the cost and carbon footprint of steel-framed buildings. The invest ....Composite Structures of High-Strength Steel and Concrete. This project plans to investigate the use in building frames of composite steel-concrete members that use high-strength steel (HSS) instead of mild steel (MS). HSS is finding increased use in construction, and HSS has a much greater strength-to-weight ratio than MS, leading to lighter composite structures, less material usage and smaller foundations. Overall, this reduces the cost and carbon footprint of steel-framed buildings. The investigation is planned to involve physical testing, numerical studies, developing structural models and crafting design guidance for T-beams, columns and joints. The major intended outcome of the project is design guidance that will support the expanded use of HSS.Read moreRead less
Three-dimensional printing of structures using fibre reinforced geopolymer concrete. This project aims to investigate geopolymer binders for cement. Three-dimensional printing using concrete can eliminate expensive formwork but is hampered by a lack of underpinning theoretical material and structural research. Conventional Portland cement’s setting characteristics limit its use for three-dimensional (3D) printing. The project will develop a theoretical framework for the structural properties of ....Three-dimensional printing of structures using fibre reinforced geopolymer concrete. This project aims to investigate geopolymer binders for cement. Three-dimensional printing using concrete can eliminate expensive formwork but is hampered by a lack of underpinning theoretical material and structural research. Conventional Portland cement’s setting characteristics limit its use for three-dimensional (3D) printing. The project will develop a theoretical framework for the structural properties of the 3D printed concrete and flow of geopolymer binder through aggregate bed, and design a fibre reinforcement system. This project is expected to improve construction, reduce injury rates and create high-end technology-based jobs.Read moreRead less
Additive manufacturing of functionally graded geopolymers. This project aims to use contour crafting for three-dimensional printing of functionally graded geopolymer concrete. Contour crafting has been touted for producing uniform structural members made of conventional concrete mixtures. This project will develop the existing technique to produce microstructurally graded geopolymer structures and include functionally graded placement of fibre within a geopolymer matrix. It will investigate mech ....Additive manufacturing of functionally graded geopolymers. This project aims to use contour crafting for three-dimensional printing of functionally graded geopolymer concrete. Contour crafting has been touted for producing uniform structural members made of conventional concrete mixtures. This project will develop the existing technique to produce microstructurally graded geopolymer structures and include functionally graded placement of fibre within a geopolymer matrix. It will investigate mechanical, thermal and durability properties of printed composite structures. The outcome of this research could lead to cost-effective automated production of specialised structural components.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE180101587
Funder
Australian Research Council
Funding Amount
$364,446.00
Summary
Three-dimensional printable geo-polymer with orientable fibres for construction application. This project aims to develop a fibre-reinforced geo-polymer for three-dimensional concrete printing (3DCP). 3DCP allows freeform construction without the use of expensive formwork, but is limited by the range of printable concretes and reinforcing methods. Geo-polymer is a sustainable material and has adjustable setting characteristics and better fibre-matrix interface properties than conventional cemen ....Three-dimensional printable geo-polymer with orientable fibres for construction application. This project aims to develop a fibre-reinforced geo-polymer for three-dimensional concrete printing (3DCP). 3DCP allows freeform construction without the use of expensive formwork, but is limited by the range of printable concretes and reinforcing methods. Geo-polymer is a sustainable material and has adjustable setting characteristics and better fibre-matrix interface properties than conventional cement. This project is expected to improve construction safety and costs.Read moreRead less
Use of rammed earth in Aboriginal communities of Australia. An exhaustive set of engineering and construction guidelines for rammed earth will be elaborated in order to produce affordable, safe and cost-effective houses in Aboriginal areas of Australia. The outcome of this project is the production of a 'Proposal Form for Standards Development' for rammed earth to be submitted to Standards Australia.