Overcoming performance limitations in multicrystalline silicon solar cells. This project aims to address the major impediments to improved efficiency of multicrystalline silicon solar cells, the most prevalent in industry today. Three key areas have been identified: understanding the fundamental source of carrier recombination in this material, the application of plasma silicon nitride to reducing this recombination, and developing a suitable technique for texturing the front surface of the cell ....Overcoming performance limitations in multicrystalline silicon solar cells. This project aims to address the major impediments to improved efficiency of multicrystalline silicon solar cells, the most prevalent in industry today. Three key areas have been identified: understanding the fundamental source of carrier recombination in this material, the application of plasma silicon nitride to reducing this recombination, and developing a suitable technique for texturing the front surface of the cells. By using novel, advanced techniques to gain a deeper physical understanding of these issues, it will be possible to develop new, cost-effective processes that improve efficiency and are applicable in industry.Read moreRead less
Spray-on Hydrogenated Films for Solar Cells. A successful project will contribute to a reduction in the cost of photovoltaic solar energy. This goal might be reached directly, via the development of spray-on hydrogenated films, or indirectly, through an improved knowledge of hydrogen passivation. Either way, the project will provide Australian Partner Investigator, Spark Solar, with a manufacturing edge over its global competitors. In so doing, it will support the burgeoning photovoltaic industr ....Spray-on Hydrogenated Films for Solar Cells. A successful project will contribute to a reduction in the cost of photovoltaic solar energy. This goal might be reached directly, via the development of spray-on hydrogenated films, or indirectly, through an improved knowledge of hydrogen passivation. Either way, the project will provide Australian Partner Investigator, Spark Solar, with a manufacturing edge over its global competitors. In so doing, it will support the burgeoning photovoltaic industry in Australia, providing jobs in manufacturing and research, and increasing the viability of photovoltaic energy as an alternative to fossil fuels. The project will also help keep Australia at the forefront of advances in photovoltaics and semiconductors.Read moreRead less
Low temperature fabrication of silicon-based thin film transistors (TFTs) for flat panel displays - an entirely new approach. This project represents an entirely new approach to low temperature crystallization of amorphous silicon, and its application to TFT fabrication in flat panel displays, and involves a partnership with the Australian high-tech company, WRiota. The research is in a field of high national priority, namely nanotechnology, since the technology is based on materials modificati ....Low temperature fabrication of silicon-based thin film transistors (TFTs) for flat panel displays - an entirely new approach. This project represents an entirely new approach to low temperature crystallization of amorphous silicon, and its application to TFT fabrication in flat panel displays, and involves a partnership with the Australian high-tech company, WRiota. The research is in a field of high national priority, namely nanotechnology, since the technology is based on materials modification at the nanoscale by nanoindentation. This project will further provide valuable opportunities for a number of research students and ECRs to gain experience in both the industrial and academic worlds and skills needed for Australia's nanotechnology workforce.Read moreRead less
NOVEL REAR-SURFACE DESIGNS FOR HIGH-EFFICIENCY COMMERCIAL SILICON SOLAR CELLS. The aim of this collaboration between the University of New South Wales and BP Solar, both world leaders in high-efficiency commercial photovoltaic technologies, is to develop the rear surface of silicon solar cells to enable commercially competitive photovoltaic modules to exceed 20 percent efficiency. The project will develop new technologies for the rear surface that enable excellent light trapping, low recombinati ....NOVEL REAR-SURFACE DESIGNS FOR HIGH-EFFICIENCY COMMERCIAL SILICON SOLAR CELLS. The aim of this collaboration between the University of New South Wales and BP Solar, both world leaders in high-efficiency commercial photovoltaic technologies, is to develop the rear surface of silicon solar cells to enable commercially competitive photovoltaic modules to exceed 20 percent efficiency. The project will develop new technologies for the rear surface that enable excellent light trapping, low recombination and good electrical interconnection that allow the substantial cost and efficiency benefits promised by the use of silicon wafers approaching 150 microns in thickness.Read moreRead less
Development of an advanced semiconductor characterisation capability for infrared focal plane array applications. Australian access to world leading technology in state-of-the-art infrared detectors is key to future advanced systems for defence surveillance and sensing, mineral exploration, biomedical instrumentation, precision agriculture, environmental monitoring and homeland security. This project will ensure that Australia contributes to an integral component required in the development of t ....Development of an advanced semiconductor characterisation capability for infrared focal plane array applications. Australian access to world leading technology in state-of-the-art infrared detectors is key to future advanced systems for defence surveillance and sensing, mineral exploration, biomedical instrumentation, precision agriculture, environmental monitoring and homeland security. This project will ensure that Australia contributes to an integral component required in the development of these technologies allowing early access to future systems. It will also enable Austarlia to play a leading role in setting the research directions for infrared materials that will place Australian research at the forefront in this area.Read moreRead less
CONTROL AND INTERFACING OF GRID-CONNECTED IGBT INVERTERS FOR SMALL-SCALE WIND GENERATORS. The project aims to investigate methods for extracting and converting intermittent energy from variable speed wind generators and supplying to electricity grids. Low cost power conditioning units for integrating small-scale wind generators will be designed, developed and commercialised. It is expected that this project will lead to a systematic design procedure for grid connected inverter technology using ....CONTROL AND INTERFACING OF GRID-CONNECTED IGBT INVERTERS FOR SMALL-SCALE WIND GENERATORS. The project aims to investigate methods for extracting and converting intermittent energy from variable speed wind generators and supplying to electricity grids. Low cost power conditioning units for integrating small-scale wind generators will be designed, developed and commercialised. It is expected that this project will lead to a systematic design procedure for grid connected inverter technology using a novel current control technique, and extraction of more energy from small scale wind turbines especially at low wind speeds. Successful commercialisation will result in significant reduction in cost resulting wider application of wind turbines, substantial economic benefit to the commercial partners as well as Australian communities in rural areas.Read moreRead less
SIMULATION OF DYE SENSITISED SOLAR CELL SYSTEMS: A ROUTE TO INCREASING MODULE AND ARRAY PERFORMANCE. This project will address the need to minimise electrical losses in arrays of dye-sensitised solar cells by undertaking development of a comprehensive electrical circuit model of the cells. The model will enable optimal design of the materials, geometry and interconnection of cells, maximum power delivery from cell arrays, and provide understanding of the impact of shading on the performance of ....SIMULATION OF DYE SENSITISED SOLAR CELL SYSTEMS: A ROUTE TO INCREASING MODULE AND ARRAY PERFORMANCE. This project will address the need to minimise electrical losses in arrays of dye-sensitised solar cells by undertaking development of a comprehensive electrical circuit model of the cells. The model will enable optimal design of the materials, geometry and interconnection of cells, maximum power delivery from cell arrays, and provide understanding of the impact of shading on the performance of arrays of dye-sensitised solar cells. This research will accelerate the development of environmentally friendly electricity generation in Australia, and contribute to employment and exports of technology.
Read moreRead less
Next generation evaporated and laser diode processed thin-film silicon-on-glass solar cells. The project targets a new generation of low-cost silicon solar cell that will significantly reduce the costs of generating electricity from sunlight by depositing cells onto glass as it comes from a glass factory. Solar cells are presently the world's most rapidly growing energy source, with Australians and Australian companies already major players in the associated rapidly expanding industry. Solar cel ....Next generation evaporated and laser diode processed thin-film silicon-on-glass solar cells. The project targets a new generation of low-cost silicon solar cell that will significantly reduce the costs of generating electricity from sunlight by depositing cells onto glass as it comes from a glass factory. Solar cells are presently the world's most rapidly growing energy source, with Australians and Australian companies already major players in the associated rapidly expanding industry. Solar cells represent the cleanest and most acceptable technology yet suggested for supplying the world's future energy needs. A cleaner future environment than otherwise likely is another expected outcome as is the creation of major new opportunities for Australian industry.Read moreRead less
A Novel Inline High-Efficiency Motor/Pump System. Around 19% of the world’s and 30% of the Australia’s electric energy is consumed by pump technologies. Significant energy savings are possible if the major components of pump systems, including inverter, motor and pump, operate at their maximum possible efficiency under varying loads. A novel pump design in this project accommodates integrated electronics in a submersible housing. A seal-less design helps mitigate several aspects of pump failure ....A Novel Inline High-Efficiency Motor/Pump System. Around 19% of the world’s and 30% of the Australia’s electric energy is consumed by pump technologies. Significant energy savings are possible if the major components of pump systems, including inverter, motor and pump, operate at their maximum possible efficiency under varying loads. A novel pump design in this project accommodates integrated electronics in a submersible housing. A seal-less design helps mitigate several aspects of pump failure and its in-line structure reduces assembly cost. Accurately measured efficiency maps will be utilised to demonstrate the non-linear relationship between motor and pump quantities as well as developing models for indirectly estimating feedback quantities and achieving the highest system efficiency.Read moreRead less
Compact high voltage superconducting fault current limiter employing a new core architecture and novel magnetic materials. The proposed project is an example of applied research that utilises a frontier technology (superconductors) in an application with both national and community benefits. Fault current limiters are designed to protect electricity grids. The integration of superconductors in fault current limiting applications allows for this protection to be achieved in an energy efficient ma ....Compact high voltage superconducting fault current limiter employing a new core architecture and novel magnetic materials. The proposed project is an example of applied research that utilises a frontier technology (superconductors) in an application with both national and community benefits. Fault current limiters are designed to protect electricity grids. The integration of superconductors in fault current limiting applications allows for this protection to be achieved in an energy efficient manner, since negligible impedance is applied to the network during the un-faulted state. Effective and efficient protection of the electricity network is of national interest, with any failure affecting industry and individuals. The proposed research team is in a leading position to develop the potential of this technology for both national networks and a world market.Read moreRead less