Condition monitoring and process control of injection molding. Injection molding has been widely used in automotive industry and improvement of the productivity and quality of the products is very important for the injection molding production to be internationally competitive. The aim of this project is to develop a condition monitoring and process control system to monitor the key parameters of the injection molding processes, to optimise the design and process conditions, and consequently, to ....Condition monitoring and process control of injection molding. Injection molding has been widely used in automotive industry and improvement of the productivity and quality of the products is very important for the injection molding production to be internationally competitive. The aim of this project is to develop a condition monitoring and process control system to monitor the key parameters of the injection molding processes, to optimise the design and process conditions, and consequently, to more actively control the processes. This will lead to an more reliable process, improved productivity and production of higher quality of moldings.Read moreRead less
Nanostrutured Magnesium-base Composites for High-density Hydrogen Storage. This project aims to develop nanocrstalline magnesium-based composites for effective hydrogen storage, overcoming two main technical barriers of current metal hydride systems: high charging/discharging temperature and slow kinetics. Nanoscale catalysts based on mesoporous carbons and metal nanoparticles will be introduced into the magnesium to increase storage capacity and increase the rate at low temperatures. Fundament ....Nanostrutured Magnesium-base Composites for High-density Hydrogen Storage. This project aims to develop nanocrstalline magnesium-based composites for effective hydrogen storage, overcoming two main technical barriers of current metal hydride systems: high charging/discharging temperature and slow kinetics. Nanoscale catalysts based on mesoporous carbons and metal nanoparticles will be introduced into the magnesium to increase storage capacity and increase the rate at low temperatures. Fundamental understanding on the effects of catalysts, and adsorption and desorption mechanisms will be obtained to optimise the composite materials. This project will lead to effective and practical technology for hydrogen storage that will meet the target of commercial fuel cell vehicles.Read moreRead less
Fine Structured Optical Fibre Fabrication - Soot, Rheology and Nanostructure in Modified Chemical Vapour Deposition. For 30 years photonics and telecommunications have relied heavily on optical fibres made by Modified Chemical Vapour Deposition (MCVD), a complex, highly dynamic process with many interacting variables, which is still more art than science. The results are good enough for most purposes but the next generation of photonics demands fibres with intricate, precisely defined internal s ....Fine Structured Optical Fibre Fabrication - Soot, Rheology and Nanostructure in Modified Chemical Vapour Deposition. For 30 years photonics and telecommunications have relied heavily on optical fibres made by Modified Chemical Vapour Deposition (MCVD), a complex, highly dynamic process with many interacting variables, which is still more art than science. The results are good enough for most purposes but the next generation of photonics demands fibres with intricate, precisely defined internal structures. A multi-disciplinary team will elucidate and quantify the exact nature of the fundamental science underlying MCVD - of silicate soot formation, deposition and heat treatment - and translate this into reproducibly fabricated fine structured fibres with high optical and mechanical performance.Read moreRead less
PRODUCTION OF OPTIMAL MICROSTRUCTURED POLYMER OPTICAL FIBRE. Microstructured optical fibres have been described as the 'next generation' of optical fibres, because of their ability to produce tailorisable optical effects. Our success in producing these fibres in polymer was a world-first. This project will yield a fundamental understanding of the fabrication process, so that for any fibre design the optimal drawing conditions can be determined and maintained for extended draws. This will allow i ....PRODUCTION OF OPTIMAL MICROSTRUCTURED POLYMER OPTICAL FIBRE. Microstructured optical fibres have been described as the 'next generation' of optical fibres, because of their ability to produce tailorisable optical effects. Our success in producing these fibres in polymer was a world-first. This project will yield a fundamental understanding of the fabrication process, so that for any fibre design the optimal drawing conditions can be determined and maintained for extended draws. This will allow improved draw reproducibility and fibre uniformity so that commercial quality fibres can be produced at economic rates. We will establish quantitative relationships between drawing parameters and optical properties, thus developing optimal designs and production processes.Read moreRead less
Harnessing properties of liquid metals for future devices. This project aims to hybridise low toxicity liquid metal alloys of gallium with surface confined functional micro/nano materials and explore fundamental new fluidic and physical-chemistry phenomena. Liquid metals are an under-used group of materials, but their combination of flexibility, bestowed by their room temperature fluidity, and metallic properties means they demonstrate startling behaviour. The expected outcomes are new devices a ....Harnessing properties of liquid metals for future devices. This project aims to hybridise low toxicity liquid metal alloys of gallium with surface confined functional micro/nano materials and explore fundamental new fluidic and physical-chemistry phenomena. Liquid metals are an under-used group of materials, but their combination of flexibility, bestowed by their room temperature fluidity, and metallic properties means they demonstrate startling behaviour. The expected outcomes are new devices and systems such as reconfigurable and highly efficient actuators/generators, catalysts, sensors, and electronic and optical components.Read moreRead less
A Mechanistic Approach to the Compression Properties of Z-Pinned Composites. The proposed research is a fundamental investigation of the compressive mechanical properties and failure mechanisms of fibre reinforced polymer (FRP) composites reinforced with z-pins. These composites are a new material with strong potential applications in aerospace structures subject to high compressive loads, however their compressive properties are poorly understood. Using theoretical modelling, finite element an ....A Mechanistic Approach to the Compression Properties of Z-Pinned Composites. The proposed research is a fundamental investigation of the compressive mechanical properties and failure mechanisms of fibre reinforced polymer (FRP) composites reinforced with z-pins. These composites are a new material with strong potential applications in aerospace structures subject to high compressive loads, however their compressive properties are poorly understood. Using theoretical modelling, finite element analysis and experimentation, the research program will greatly enhance the fundamental understanding of the strengthening and failure mechanisms of z-pinned composites. A key outcome of the research will be design guidelines for optimising the pinning of composites for maximum structural performance in aerospace applications.Read moreRead less
DEVELOPMENT OF SCIENTIFIC AND EXPERIMENTAL BASIS FOR MANUFACTURE OF BUILDING MATERIALS WITH SPECIAL PROPERTIES BASED ON GEOPOLYMERS. This project seeks to develop a new class of building materials based on geopolymers. These materials will have superior corrosion resistance, fire resistance, heat and noise insulating properties. The project will study in detail the effect of processing parameters on microstructure of these materials, and effect of structure and composition on properties. A good ....DEVELOPMENT OF SCIENTIFIC AND EXPERIMENTAL BASIS FOR MANUFACTURE OF BUILDING MATERIALS WITH SPECIAL PROPERTIES BASED ON GEOPOLYMERS. This project seeks to develop a new class of building materials based on geopolymers. These materials will have superior corrosion resistance, fire resistance, heat and noise insulating properties. The project will study in detail the effect of processing parameters on microstructure of these materials, and effect of structure and composition on properties. A good understanding of this would result in environmentally friendly inexpensive inorganic materials with superior durability, chemical and fire resistance, heat and noise insulation properties that can substitute organic polymers and ordinary Portland cement concrete in special applications.Read moreRead less
Prediction of Time-dependent Deformations in Post-tensioned Concrete Suspended Slabs in Tall Buildings. The proposed project aims to develop an analytical model that can predict the time-dependent deformations in post-tensioned concrete slabs considering concrete shrinkage and creep, cracking, and bond-slip behaviour. Over the past several years, numerous cases have been reported in Australia and elsewhere, of flexural elements for which the calculated deflection is far less than the actual defl ....Prediction of Time-dependent Deformations in Post-tensioned Concrete Suspended Slabs in Tall Buildings. The proposed project aims to develop an analytical model that can predict the time-dependent deformations in post-tensioned concrete slabs considering concrete shrinkage and creep, cracking, and bond-slip behaviour. Over the past several years, numerous cases have been reported in Australia and elsewhere, of flexural elements for which the calculated deflection is far less than the actual deflection leading to serviceability problems. The significance of this investigation hence lies in its potential to provide a solution to more accurately predict service-life deflections in post-tensioned concrete suspended slabs and validate the model with real-life deflections monitored over time on a current building project.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0560683
Funder
Australian Research Council
Funding Amount
$321,953.00
Summary
A furnace stack for advanced photovoltaic, photonic and microfabrication applications. Advanced silicon photovoltaic, photonic, optoelectronic and micro-electromechanical devices require state of the art processing equipment for the deposition of thin dielectric films and for controlled doping of the devices. Key techniques include the deposition of stoichiometric and silicon rich silicon nitride and silicon dioxide films, and the controlled wafer doping with boron and phosphorus. A state of the ....A furnace stack for advanced photovoltaic, photonic and microfabrication applications. Advanced silicon photovoltaic, photonic, optoelectronic and micro-electromechanical devices require state of the art processing equipment for the deposition of thin dielectric films and for controlled doping of the devices. Key techniques include the deposition of stoichiometric and silicon rich silicon nitride and silicon dioxide films, and the controlled wafer doping with boron and phosphorus. A state of the art furnace stack is to be procured which will satisfy these requirements on industrially relevant wafer sizes up to 150mm. The equipment will support a broad range of research projects in the above fields, ranging from fundamental investigations to applied research carried out in collaboration with industry partners.Read moreRead less
Current limiting mechanisms in magnesium diboride superconductors. Numerous important applications have already been identified for MgB2 wire: power transmission cables, fault current limiters, transformers and magnets for motors and generators, as well as MRI. The significant increase in current carrying capacity of one order of magnitude expected to result from the proposed program will enable MgB2 to replace presently existing low-temperature superconductors (LTS) and expensive high-temperat ....Current limiting mechanisms in magnesium diboride superconductors. Numerous important applications have already been identified for MgB2 wire: power transmission cables, fault current limiters, transformers and magnets for motors and generators, as well as MRI. The significant increase in current carrying capacity of one order of magnitude expected to result from the proposed program will enable MgB2 to replace presently existing low-temperature superconductors (LTS) and expensive high-temperature superconductors (HTS) in numerous important applications. MgB2 technology, coupled with renewable energy sources, has the potential to provide a long-term solution to the energy crisis and global warming threat.Read moreRead less