Extending building information models (BIM) for specifications and cost planning. The recognition in the 1990's that inefficiencies in the design, construction and maintenance of buildings and infrastructure were costing up to 30 per cent of the total constructed cost of buildings led to a push for the more efficient use of information. The major change in the industry to date has been the introduction of Building Information Models (BIM). Uptake has now reached the tipping point where it is be ....Extending building information models (BIM) for specifications and cost planning. The recognition in the 1990's that inefficiencies in the design, construction and maintenance of buildings and infrastructure were costing up to 30 per cent of the total constructed cost of buildings led to a push for the more efficient use of information. The major change in the industry to date has been the introduction of Building Information Models (BIM). Uptake has now reached the tipping point where it is becoming pervasive. This project examines methods of adding value to existing BIM information which will allow the industry and clients to achieve a higher level of efficiency than can be gained just through substitution of BIM for current processes.Read moreRead less
Optimization of internal pressure for designing industrial buildings. The project seeks to understand the internal pressure in a building during windstorms, to improve safety and performance. The internal pressure in a building is dependent on its volume and flexibility and the sizes of openings in the building envelope, and is a critical loading parameter in building design. Windstorm damage investigations have shown that incorrect internal pressures are frequently used in building design, lead ....Optimization of internal pressure for designing industrial buildings. The project seeks to understand the internal pressure in a building during windstorms, to improve safety and performance. The internal pressure in a building is dependent on its volume and flexibility and the sizes of openings in the building envelope, and is a critical loading parameter in building design. Windstorm damage investigations have shown that incorrect internal pressures are frequently used in building design, leading to damage. This project aims to study the internal pressures generated in buildings with a range of volumes and openings in the envelope. A combination of model-scale and full-scale tests and theoretical analysis are planned to determine critical parameters for highly turbulent air-flow though openings. Results will inform the revision of design data in codes and of guidelines for consistent, optimal design of buildings.Read moreRead less
Understanding the performance of cold-formed steel frame wall systems in fires to design for superior fire resistance. This project will develop new light gauge steel frame (LSF) wall systems with superior fire resistance rating and associated design rules to enable innovative and safe applications of these wall systems in various building applications. This will enable expansion of the worldwide market for LSF wall systems by the industry partner.
Innovative and safe design solutions for aluminium façade systems. This project plans to develop design rules and mullion profiles to support the use of façades using aluminium members with complex shapes. The façade is of great importance to the structural safety, energy efficiency and aesthetics of a building. Commonly used façade systems are made of glass supported by aluminium mullions with complex shapes. Current aluminium design standards do not consider the instability and failures caused ....Innovative and safe design solutions for aluminium façade systems. This project plans to develop design rules and mullion profiles to support the use of façades using aluminium members with complex shapes. The façade is of great importance to the structural safety, energy efficiency and aesthetics of a building. Commonly used façade systems are made of glass supported by aluminium mullions with complex shapes. Current aluminium design standards do not consider the instability and failures caused by wind actions on facades using such complex aluminium members. This project aims to conduct full-scale tests and develop advanced numerical models to resolve several critical problems and identify designs with superior wind resistance. Based on this, the project aims to provide innovative, accurate and safe design rules for the façade engineering profession and building industry.Read moreRead less
Fire resistance of complex light gauge steel framed wall systems. This project aims to investigate the thermal and structural behaviour of high-strength Light gauge Steel Framed (LSF) wall systems when exposed to fire, and develop a generic model for predicting fire resistance levels of all LSF wall systems. Plasterboard-lined LSF walls are increasingly used as cost-effective load-bearing walls in low and mid-rise buildings worldwide. This has required new wall designs with complex steel stud wa ....Fire resistance of complex light gauge steel framed wall systems. This project aims to investigate the thermal and structural behaviour of high-strength Light gauge Steel Framed (LSF) wall systems when exposed to fire, and develop a generic model for predicting fire resistance levels of all LSF wall systems. Plasterboard-lined LSF walls are increasingly used as cost-effective load-bearing walls in low and mid-rise buildings worldwide. This has required new wall designs with complex steel stud wall configurations, but their fire resistance is not understood. This project will provide validated fire resistance data and fire design methods for a proposed national Fire Design Handbook and steel design codes, enabling more widespread, safer use of these walls. This will benefit the Australian steel industry, the construction industry and the community.
Read moreRead less
Bearing capacities of innovative LiteSteel beams and their floor systems. This project will develop accurate bearing capacity design models for the new LiteSteel beams (LSB) to enable innovative and safe applications of LSBs in various flooring systems in buildings. Improved LSB floor systems will also be developed. This will enable expansion of the worldwide market for LSB products and systems by the industry partner.
High Strength Concrete Beam-Columns with High-Strength Steel Reinforcement. The aim of this project is to develop the fundamental understanding needed to design and construct high-strength concrete columns with high-strength steel reinforcement, with the intended outcome of providing design rules for adoption by engineers and Standards bodies. With significant innovations in Australian steel bar technology, strengths grades of 750 megapascals, and higher, are becoming available. These high-stren ....High Strength Concrete Beam-Columns with High-Strength Steel Reinforcement. The aim of this project is to develop the fundamental understanding needed to design and construct high-strength concrete columns with high-strength steel reinforcement, with the intended outcome of providing design rules for adoption by engineers and Standards bodies. With significant innovations in Australian steel bar technology, strengths grades of 750 megapascals, and higher, are becoming available. These high-strength steels can be used in reinforced concrete building construction and would increase the competitiveness of Australia's manufacturing industry and enable the export of high-value-added technologies. Significant efficiencies in construction costs and in carbon emissions are possible.Read moreRead less
Development of efficient, robust and architecturally-flexible structural systems using innovative blind-bolted connections. The aim of the proposed project is to develop structural systems that have sufficient stiffness, strength, and ductility to withstand code-specified loads and that will be competitive in the marketplace. The development of demonstrable cost-effective structural systems is essential if these types of systems are to be widely adopted in practice, thus allowing Australian manu ....Development of efficient, robust and architecturally-flexible structural systems using innovative blind-bolted connections. The aim of the proposed project is to develop structural systems that have sufficient stiffness, strength, and ductility to withstand code-specified loads and that will be competitive in the marketplace. The development of demonstrable cost-effective structural systems is essential if these types of systems are to be widely adopted in practice, thus allowing Australian manufacturers of blind bolts and steel tubes to achieve a greater market share.Read moreRead less
Numerical and experimental study of pounding damage of adjacent bridge structures to spatially varying earthquake ground motions. Bridge damage in an earthquake prevents rescue personnel and equipment from quick access to the affected area. Repairing or replacing a damaged bridge and the increased commuting time after the earthquake may have a significant impact on the economy and life of the general public. This project will develop techniques for earthquake-resistant bridge design.
Study of Blast Resistance Capacity of Basalt Fibre Strengthened Structures. This project plans to investigate the dynamic response of basalt fibre reinforced polymer (BFRP) reinforced structures against blast loading. Critical infrastructures such as embassy buildings, high-rise building, bridges and defence facilities are intensively targeted by increasing terrorist activities or accidental explosions. BFRP is a promising material for such structures because it is cheaper than carbon fibre and ....Study of Blast Resistance Capacity of Basalt Fibre Strengthened Structures. This project plans to investigate the dynamic response of basalt fibre reinforced polymer (BFRP) reinforced structures against blast loading. Critical infrastructures such as embassy buildings, high-rise building, bridges and defence facilities are intensively targeted by increasing terrorist activities or accidental explosions. BFRP is a promising material for such structures because it is cheaper than carbon fibre and has better physico-mechanical properties than glass fibre. However, there has been very limited study of the effectiveness of BFRP strengthening on structure blast-loading resistant capacities. This project aims to perform numerical and experimental studies to support the development of BFRP applications in strengthening structures against blast loads.Read moreRead less