The response of beams subjected to axial load and lateral soil movements. Beams (piles, soil nails, and pipelines) are not only subjected to axial (vertical, axial and longitudinal)loading, but often withstand simultaneous lateral loading, due to either explicit structural loads, or due to loads induced by movement of the soils in which they are founded. Bridge piles adjacent to an approach embankment are one example. This project will provide experimental evidence to assist with the estimation ....The response of beams subjected to axial load and lateral soil movements. Beams (piles, soil nails, and pipelines) are not only subjected to axial (vertical, axial and longitudinal)loading, but often withstand simultaneous lateral loading, due to either explicit structural loads, or due to loads induced by movement of the soils in which they are founded. Bridge piles adjacent to an approach embankment are one example. This project will provide experimental evidence to assist with the estimation of capacity, axial and shear resistance, the validation of unified solutions for beams subjected to simultaneous lateral soil movements and axial loads. Such experimental evidence and analytical solutions are not currently available. The evidence will also assist with solving a contradictory, existing design principle, which will lead to an economic and efficient design approach.Read moreRead less
Bayesian back analysis for settlement prediction of soft soils. The settlement of road embankments built on soft soils can take many years which has created additional challenges for road design and construction. Despite many years of experience with the Pacific Highway Upgrade, industry partners have seen many examples where embankments have settled more than expected during construction and after road opening. This causes potential delay delivering projects, ponding, potential aquaplaning and ....Bayesian back analysis for settlement prediction of soft soils. The settlement of road embankments built on soft soils can take many years which has created additional challenges for road design and construction. Despite many years of experience with the Pacific Highway Upgrade, industry partners have seen many examples where embankments have settled more than expected during construction and after road opening. This causes potential delay delivering projects, ponding, potential aquaplaning and unexpected maintenance. This project aims at developing useful tools for industry to better predict the settlement of embankment built on soft soils. The intended outcomes can help to increase the safety level of road transportation system of Australia, reduce construction and maintenance costs.Read moreRead less
Optimisation of shallow geothermal systems for Australian schools. This project aims to increase energy efficiency and reduce greenhouse gas emissions by optimising shallow geothermal systems in Australian schools. Shallow geothermal systems use the ground as a heat source and sink for heating and cooling. Their application to schools has the potential to harness energy from untapped resources such as sport grounds, reduce energy consumption by up to 75% and increase comfort and productivity of ....Optimisation of shallow geothermal systems for Australian schools. This project aims to increase energy efficiency and reduce greenhouse gas emissions by optimising shallow geothermal systems in Australian schools. Shallow geothermal systems use the ground as a heat source and sink for heating and cooling. Their application to schools has the potential to harness energy from untapped resources such as sport grounds, reduce energy consumption by up to 75% and increase comfort and productivity of our children at school. An expected outcome of this project is to create a full scale physical model along advanced optimisation models which will allow better understanding of energy efficiency gains, and lead towards improving geothermal design techniques tailored to educational buildings.Read moreRead less
Direct geothermal energy: harnessing an emerging technology. To mitigate the impacts of climate change, the demand for renewable energy technologies with low greenhouse gas (GHG) emissions is rapidly becoming a global priority. Direct geothermal systems use shallow ground as a heat source and sink for heating and cooling buildings, using ground heat exchangers (GHEs) and heat pumps. Substituting common heating and cooling systems with geothermal ones can reduce energy consumption by up to 75 per ....Direct geothermal energy: harnessing an emerging technology. To mitigate the impacts of climate change, the demand for renewable energy technologies with low greenhouse gas (GHG) emissions is rapidly becoming a global priority. Direct geothermal systems use shallow ground as a heat source and sink for heating and cooling buildings, using ground heat exchangers (GHEs) and heat pumps. Substituting common heating and cooling systems with geothermal ones can reduce energy consumption by up to 75 per cent and thus greenhouse gas emissions, since 91 per cent of electricity comes from fossil fuels in Australia. This project aims to develop new full scale physical and numerical models which will allow studying the effects of GHE configuration and intermittent use on efficiency and which will lead towards improving the poor and scarce existing design techniques.Read moreRead less
Direct geothermal energy: Reducing the rural industries’ carbon footprint. Direct geothermal energy: Reducing the rural industries’ carbon footprint. This project aims to design poultry brooder houses using geothermal technology. Reducing greenhouse gas emissions is a global priority. The lack of natural gas in rural areas and brooder houses’ heating and cooling needs make geothermal ideal. Direct geothermal systems use shallow ground both as a heat source and as a heat sink for cooling, using h ....Direct geothermal energy: Reducing the rural industries’ carbon footprint. Direct geothermal energy: Reducing the rural industries’ carbon footprint. This project aims to design poultry brooder houses using geothermal technology. Reducing greenhouse gas emissions is a global priority. The lack of natural gas in rural areas and brooder houses’ heating and cooling needs make geothermal ideal. Direct geothermal systems use shallow ground both as a heat source and as a heat sink for cooling, using heat pumps. Their application to poultry brooder houses could reduce electricity consumption by up to 75% and thus greenhouse gas emissions, since 91% of electricity comes from fossil fuels in Australia; minimise the need for expensive bottled gas heating; reduce the levels of ammonia emissions; and increase farm productivity.Read moreRead less
Microstructure-Based Computational Homogenization of Geomaterials. This project seeks to establish a basis for virtual testing of materials. This type of non-destructive testing has numerous applications of obvious benefit to society and will contribute to the continued growth and development of a large number of industries in Australia and worldwide. The methods developed will allow for cheaper, faster, and more accurate testing of materials. The outcomes of the project can find direct applicat ....Microstructure-Based Computational Homogenization of Geomaterials. This project seeks to establish a basis for virtual testing of materials. This type of non-destructive testing has numerous applications of obvious benefit to society and will contribute to the continued growth and development of a large number of industries in Australia and worldwide. The methods developed will allow for cheaper, faster, and more accurate testing of materials. The outcomes of the project can find direct application in civil engineering as well as in environmental, mining and petroleum engineering which together make up a significant portion of the nation's industry.Read moreRead less
Thermo-hydro-mechanics of geosynthetic liners: from processes to prediction. This project aims to resolve the complex interactions affecting the long-term performance of geosynthetic liner systems under harsh environmental conditions for preventing groundwater contamination. Failures of waste containment lining systems result in millions of dollars remedial costs and high societal costs. The project expects to underpin the development of an experimentally-validated theory to predict the performa ....Thermo-hydro-mechanics of geosynthetic liners: from processes to prediction. This project aims to resolve the complex interactions affecting the long-term performance of geosynthetic liner systems under harsh environmental conditions for preventing groundwater contamination. Failures of waste containment lining systems result in millions of dollars remedial costs and high societal costs. The project expects to underpin the development of an experimentally-validated theory to predict the performance of geosynthetic liner systems at high temperatures. Expected outcomes of the project are the establishment of a new conceptual framework and providing new guidelines for the design of geosynthetic liner systems for environmental protection. These outcomes are expected to benefit the waste and mining industries by informing planning, decision makers, consultants and construction engineers with science-based information on new lining systems for landfills and mining and industry waste containment.Read moreRead less
Designing the next generation of geosynthetic liner systems . The project aims to improve the effectiveness of geosynthetic liner systems to contain emerging contaminants such as per-and poly-fluoroalkyl substances (PFASs) for better protection of Australian groundwater resources. The project expects to experimentally validate theory to improve predictive models for performance of geosynthetic liner systems. Expected outcomes include new and updated design guidelines for effective environmental ....Designing the next generation of geosynthetic liner systems . The project aims to improve the effectiveness of geosynthetic liner systems to contain emerging contaminants such as per-and poly-fluoroalkyl substances (PFASs) for better protection of Australian groundwater resources. The project expects to experimentally validate theory to improve predictive models for performance of geosynthetic liner systems. Expected outcomes include new and updated design guidelines for effective environmental protection against PFASs and establishment of new approaches for predicting functional containment lifetimes of liner systems. These outcomes are expected to benefit the waste and remediation industries by influencing next-generation design regulations to ensure long-term environmental protection from PFAS.Read moreRead less
Non-differentiable Energy Minimisation For Modelling Fractured Porous Media. This project is aimed at advancing theoretical, computational and experimental bases for the fracturing of geomaterials, and providing scientists and engineers with much needed predictive tools for quantitative assessment of the responses. By incorporating previously neglected aspects such as energy minimisation, advanced constitutive modelling, and non-planar interacting fracture growth, confidence in the design and pl ....Non-differentiable Energy Minimisation For Modelling Fractured Porous Media. This project is aimed at advancing theoretical, computational and experimental bases for the fracturing of geomaterials, and providing scientists and engineers with much needed predictive tools for quantitative assessment of the responses. By incorporating previously neglected aspects such as energy minimisation, advanced constitutive modelling, and non-planar interacting fracture growth, confidence in the design and planning of engineering processes in fractured porous media will be increased to the point that costly over/under designs are avoided. Through the use of the tools developed, it will be possible to detect weaknesses in the design, assess the impact and implement effective measures to improve performance.Read moreRead less