Barriers for cost - effective rock fall hazard mitigation. Rock fall barriers are used throughout Australia to protect its extensive road and rail networks. These networks are vital links in the nation's infrastructure and underpin its economic prosperity and development. There are thousands of cuttings on Australia' transport networks, many of which have the potential to be affected by rock falls. These events can take lives and severely disrupt the performance of our transport infrastructure. ....Barriers for cost - effective rock fall hazard mitigation. Rock fall barriers are used throughout Australia to protect its extensive road and rail networks. These networks are vital links in the nation's infrastructure and underpin its economic prosperity and development. There are thousands of cuttings on Australia' transport networks, many of which have the potential to be affected by rock falls. These events can take lives and severely disrupt the performance of our transport infrastructure. This project will develop new cost-effective methods for designing against rock fall events using a combination of advanced testing and computer modelling.Read moreRead less
Efficient reinforced concrete design using linear elastic finite element analysis. It is expected that this project will bring about changes in the design practice for reinforced concrete structures, particularly those of complex geometry, which will enhance the competitiveness of the Australian design community. Through reduction of the overuse of concrete often present in current conservative design procedures for such structures, the project will lead to a reduction in the impact of reinforce ....Efficient reinforced concrete design using linear elastic finite element analysis. It is expected that this project will bring about changes in the design practice for reinforced concrete structures, particularly those of complex geometry, which will enhance the competitiveness of the Australian design community. Through reduction of the overuse of concrete often present in current conservative design procedures for such structures, the project will lead to a reduction in the impact of reinforced concrete construction on the environment and contribute to sustainable engineering practise.Read moreRead less
Ageing of pile shaft friction in sand. Piles driven in sand are very commonly used to support structures in Australia. Their design, however, is based on pile capacities measured shortly after installation - even though capacities are observed to increase significantly with time. This proposal seeks to develop a methodology through which the effects of time can be incorporated in design and hence lead to cheaper foundation solutions.
Numerical prediction of train and vehicle induced ground vibrations and their effects on structures. This project will develop an innovative new method based on coupled finite element and scaled boundary finite-element analysis for predicting the ground vibrations induced by road traffic and underground or surface trains. The method will have immediate application in transportation engineering to predict traffic-induced ground vibrations, in geotechnical engineering to design isolation trenches ....Numerical prediction of train and vehicle induced ground vibrations and their effects on structures. This project will develop an innovative new method based on coupled finite element and scaled boundary finite-element analysis for predicting the ground vibrations induced by road traffic and underground or surface trains. The method will have immediate application in transportation engineering to predict traffic-induced ground vibrations, in geotechnical engineering to design isolation trenches and wave barriers to dissipate wave propagation, and in structural engineering to estimate in-structure vibration level and design isolators for sensitive equipment housed within. The technique will involve fundamental advances in the scaled boundary finite-element method, as calculations will be performed in a moving reference frame.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE180100101
Funder
Australian Research Council
Funding Amount
$744,697.00
Summary
New generation facility for impact testing. This project aims to develop a new generation, national-impact testing facility to study the impact response of civil and mechanical structures and components. This project expects to seek simultaneous, realistic impact scenarios with very high velocities, which were previously impossible. This will enhance the capability for innovative research on real-time behaviour of components/systems under high amplitude impacts to augment their protection throug ....New generation facility for impact testing. This project aims to develop a new generation, national-impact testing facility to study the impact response of civil and mechanical structures and components. This project expects to seek simultaneous, realistic impact scenarios with very high velocities, which were previously impossible. This will enhance the capability for innovative research on real-time behaviour of components/systems under high amplitude impacts to augment their protection through advanced materials. This project is essential for research on rational design philosophies and effective retrofitting of high-risk buildings, infrastructure and armoured vehicles. Benefits include the saving of lives and property through new knowledge from credible impact testing.Read moreRead less
Securing Australian floating wind developments with helical anchors. This project will reduce the cost of offshore floating wind energy by uniting leading academic expertise and innovative industry partners to develop the knowledge and practical tools that will enable the deployment of helical anchors as a cheap and reliable anchoring system for floating wind. Helical anchors are seen as the most promising solution to anchor wind turbines, but their deployment has been limited by uncertainties a ....Securing Australian floating wind developments with helical anchors. This project will reduce the cost of offshore floating wind energy by uniting leading academic expertise and innovative industry partners to develop the knowledge and practical tools that will enable the deployment of helical anchors as a cheap and reliable anchoring system for floating wind. Helical anchors are seen as the most promising solution to anchor wind turbines, but their deployment has been limited by uncertainties associated with the torque and vertical force required for installation in complex seabeds, and their performance under environmental loading. The project will address these specific points through a combination of physical, numerical and analytical modelling, using data and design scenarios provided by industry.
Read moreRead less
Improved analysis and design of structures to resist blast and impact. This project aims to develop an improved single-degree-of-freedom (SDOF) model which can be easily used in design analysis by engineers and yield accurate structural response predictions in analysis of structures subjected to blast and impact loads. Current practice uses SDOF models in analysis of structures subjected to blast and impact loads, however many experimental tests and high fidelity numerical simulations have revea ....Improved analysis and design of structures to resist blast and impact. This project aims to develop an improved single-degree-of-freedom (SDOF) model which can be easily used in design analysis by engineers and yield accurate structural response predictions in analysis of structures subjected to blast and impact loads. Current practice uses SDOF models in analysis of structures subjected to blast and impact loads, however many experimental tests and high fidelity numerical simulations have revealed the SDOF analysis does not always lead to accurate structural response predictions. This project will develop an improved SDOF model, which can be easily used in design analysis by engineers and yield accurate structural response predictions. These will lead to more economical designs and robust structures that resist blast and impact loads.Read moreRead less
Reducing geotechnical design conservatism to secure floating wind energy. The next frontier for offshore wind energy is moving further out to sea to avail of stronger and more consistent wind speeds. In these water depths, wind turbines are installed on floaters tethered to anchors in the seabed. Geotechnical design of anchors is inherently conservative, having been shaped by technical and economic considerations of oil and gas facilities. The offshore wind energy industry cannot afford to adopt ....Reducing geotechnical design conservatism to secure floating wind energy. The next frontier for offshore wind energy is moving further out to sea to avail of stronger and more consistent wind speeds. In these water depths, wind turbines are installed on floaters tethered to anchors in the seabed. Geotechnical design of anchors is inherently conservative, having been shaped by technical and economic considerations of oil and gas facilities. The offshore wind energy industry cannot afford to adopt such conservatism if floating wind is to become commercially viable. This project will, through numerical developments, geotechnical centrifuge modelling and field testing, develop the science that will lead to a reliability-based geotechnical design approach to make floating offshore wind energy economic and viable.Read moreRead less
Unlocking new generation physical modelling with realistic soil response. This project will improve the safety and efficiency of geo-structures associated with offshore wind developments by better characterising and replicating the behaviour of carbonate sediments. Novel characterisation techniques will be used to better understand the links between the chemical and structural composition of the sediments and their engineering properties relevant to geotechnical design, and how to better replica ....Unlocking new generation physical modelling with realistic soil response. This project will improve the safety and efficiency of geo-structures associated with offshore wind developments by better characterising and replicating the behaviour of carbonate sediments. Novel characterisation techniques will be used to better understand the links between the chemical and structural composition of the sediments and their engineering properties relevant to geotechnical design, and how to better replicate carbonate sediment behaviour in a laboratory – an outcome that has eluded researchers for decades. The main outcomes of the project will be the development of soil sample reconstitution techniques enabling high-fidelity physical modelling to be undertaken to assist in the design offshore wind turbine foundations.Read moreRead less