Integrated energy conversion and management systems in silicon-on-sapphire. The aim of this research is to develop specialised "power-supply-on-a-chip" integrated circuits (ICs) for efficient conversion and management of electrical energy. The project will utilise and develop the unique local expertise and IC fabrication capability in silicon-on-sapphire technology in partnership with Sapphicon Semiconductor Pty. Ltd. The ICs developed will be used to improve the performance of small-scale elect ....Integrated energy conversion and management systems in silicon-on-sapphire. The aim of this research is to develop specialised "power-supply-on-a-chip" integrated circuits (ICs) for efficient conversion and management of electrical energy. The project will utilise and develop the unique local expertise and IC fabrication capability in silicon-on-sapphire technology in partnership with Sapphicon Semiconductor Pty. Ltd. The ICs developed will be used to improve the performance of small-scale electric power and transport systems based on alternative energy sources, thereby assisting energy self-sufficiency in rural and remote communities and reducing Australia's dependence on fossil and other non-renewable fuels. Sales of the ICs will also generate export income for Australian industry.Read moreRead less
Wideband Silicon-Based Radio-Frequency Front-End Module for 5G New Radio . The project aims to advance knowledge in radio-frequency integrated circuit design in low-cost silicon technologies, particularly power amplifiers design with enhanced energy efficiency at output power back-off levels. The intended outcome of this project will be a wideband RF front-end module with beam steering capability that can cover the 24-50 GHz spectrum band. This will ultimately enable the creation of a low-cost a ....Wideband Silicon-Based Radio-Frequency Front-End Module for 5G New Radio . The project aims to advance knowledge in radio-frequency integrated circuit design in low-cost silicon technologies, particularly power amplifiers design with enhanced energy efficiency at output power back-off levels. The intended outcome of this project will be a wideband RF front-end module with beam steering capability that can cover the 24-50 GHz spectrum band. This will ultimately enable the creation of a low-cost and energy-efficient 5G millimetre-wave network that could potentially trigger the development of ultra-reliable low latency communications, which is critical for emerging intelligent transportation systems and will maintain Australia’s leadership position in the development of break-through wireless technology.Read moreRead less
Low-Cost Wireless Transmitter with Compact Package for Industrial Sensing . This project aims to provide a solid foundation for silicon-based transmitter design with beam-steering capability operating beyond 100 GHz. The project expects to advance knowledge in low-cost radio-frequency integrated circuit design with miniaturised packaging technology for use in industrial sensing. Expected outcomes of this project include a prototype consisting of a miniaturised 140-GHz phased-array transmitter wi ....Low-Cost Wireless Transmitter with Compact Package for Industrial Sensing . This project aims to provide a solid foundation for silicon-based transmitter design with beam-steering capability operating beyond 100 GHz. The project expects to advance knowledge in low-cost radio-frequency integrated circuit design with miniaturised packaging technology for use in industrial sensing. Expected outcomes of this project include a prototype consisting of a miniaturised 140-GHz phased-array transmitter with packaged antenna arrays, along with a developed selection guideline to choose the "best" silicon-based technology node for cost-effective design. This should provide benefits for organisations working on wireless sensing technologies and lead to new ways of using these technologies for a variety of emerging applications.Read moreRead less
Heat conduction characterisation of buried insulation layers in silicon-on-insulator systems. This project aims to establish a new technique for the accurate characterisation of thermal conduction in buried insulation layers in advanced silicon-on-insulator (SOI) systems. The success of the project will enable the Australian semiconductor industry to develop high performance SOI systems.
Digitally Assisted Power Amplifier Design with Enhanced Energy Efficiency. The project aims to advance design techniques for power amplifiers operating in the recently allocated spectrum for 5G New Radio, from approximately 24 GHz to 52 GHz. The intended outcome is a compact and high efficiency transmitter using digitally assisted power amplifier design techniques in low-cost Complementary Metal–Oxide–Semiconductor (CMOS) technology. Such innovation will have significant impacts on our daily lif ....Digitally Assisted Power Amplifier Design with Enhanced Energy Efficiency. The project aims to advance design techniques for power amplifiers operating in the recently allocated spectrum for 5G New Radio, from approximately 24 GHz to 52 GHz. The intended outcome is a compact and high efficiency transmitter using digitally assisted power amplifier design techniques in low-cost Complementary Metal–Oxide–Semiconductor (CMOS) technology. Such innovation will have significant impacts on our daily life, as it will build the hardware foundation for the next generation of wireless systems. Consequently, various emerging applications such as virtual/augmented reality will be supported, maintaining national leadership in the development of wireless technology, and providing economic benefits for Australian industries.Read moreRead less
Optimising train driver vigilance system: reactivation of a fatigued driver. Fatigue poses frequent problems in train drivers. The repetitive nature of the train-driving task is a precursor of fatigue. This application proposes a novel design concept for the current train driver vigilance system manufactured by our industry partner. The proposed new vigilance system will not only assure that the driver is awake by warning of fatigue states, but will also act as an important cue in the control of ....Optimising train driver vigilance system: reactivation of a fatigued driver. Fatigue poses frequent problems in train drivers. The repetitive nature of the train-driving task is a precursor of fatigue. This application proposes a novel design concept for the current train driver vigilance system manufactured by our industry partner. The proposed new vigilance system will not only assure that the driver is awake by warning of fatigue states, but will also act as an important cue in the control of the train. Incorporating fatigue detection in the vigilance monitor is of commercial value to our industry partner. Furthermore, this study will help improve the safety culture of the railway environment.Read moreRead less
Rapid Recovery from Radiation-induced Errors in Reconfigurable Hardware. This project aims to develop new methods for implementing satellite-based digital systems using reconfigurable hardware devices. The results aim to extend knowledge on the design of fault-tolerant systems and enable the use of off-the-shelf digital hardware in the implementation of satellite systems. The project aims to develop essential tools to assist in implementing fault-tolerant reconfigurable systems. These tools will ....Rapid Recovery from Radiation-induced Errors in Reconfigurable Hardware. This project aims to develop new methods for implementing satellite-based digital systems using reconfigurable hardware devices. The results aim to extend knowledge on the design of fault-tolerant systems and enable the use of off-the-shelf digital hardware in the implementation of satellite systems. The project aims to develop essential tools to assist in implementing fault-tolerant reconfigurable systems. These tools will be founded on the discovery of techniques needed for modifying a design into a form amenable to error recovery and for implementing the design in hardware. During the course of the project, these techniques will be demonstrated and tested in-orbit on the international QB50 CubeSat program.Read moreRead less
New Methods and Microelectronics for Wireless Communication Systems. Global demand for high quality wireless communications poses significant challenges. The so-called "physical layer" is crucial, as this is where the vagaries of the wireless channel, including interference and limited bandwidth, are mitigated by sophisticated signal processing.
This project will conduct applied research to meet these physical layer challenges, providing solutions that feed directly into next generation wirel ....New Methods and Microelectronics for Wireless Communication Systems. Global demand for high quality wireless communications poses significant challenges. The so-called "physical layer" is crucial, as this is where the vagaries of the wireless channel, including interference and limited bandwidth, are mitigated by sophisticated signal processing.
This project will conduct applied research to meet these physical layer challenges, providing solutions that feed directly into next generation wireless communication systems.
Uniquely, this project focuses on the transfer of research from theoretical genesis, through to realisation of silicon integrated
circuit "chips". This will maximise both the impact of the research
and the potential for significant national economic benefits to accrue.Read moreRead less
Liquid Metal for quench detection sensors and low resistance joints. This project aims to develop next-generation liquid metal-based superconducting joints and quench detection sensors to enable superconducting magnets to operate in “persistent mode”. This would make a significant contribution to improving the safety and performance of superconducting coil systems at a reduced cost. Furthermore, intelligent features will be formulated to prevent hazardous and inefficient operating conditions. Th ....Liquid Metal for quench detection sensors and low resistance joints. This project aims to develop next-generation liquid metal-based superconducting joints and quench detection sensors to enable superconducting magnets to operate in “persistent mode”. This would make a significant contribution to improving the safety and performance of superconducting coil systems at a reduced cost. Furthermore, intelligent features will be formulated to prevent hazardous and inefficient operating conditions. The expected outcome is that an advanced superconducting coil system with improved stability and safety is delivered with newly developed liquid metal-based materials and relevant fabrication techniques.Read moreRead less
Overcoming Transistor Performance Issues for Emerging Millimetre-Wave Applications. The operation of transistors for emerging millimeter-wave applications, such as point to point communications and automotive radar, will be researched. The aim is to develop circuit design methodologies that extract better performance from a given fabrication process, thus giving a competitive advantage to local industry, which shares the process with other international companies. Transistor operating range, lin ....Overcoming Transistor Performance Issues for Emerging Millimetre-Wave Applications. The operation of transistors for emerging millimeter-wave applications, such as point to point communications and automotive radar, will be researched. The aim is to develop circuit design methodologies that extract better performance from a given fabrication process, thus giving a competitive advantage to local industry, which shares the process with other international companies. Transistor operating range, linearity and characterisation will be enhanced. New models and demonstrator circuits will be produced. The project will skill postgraduates in microwave theory and techniques applied to the development of high performance circuits.Read moreRead less