Advanced microwave and millimetre-wave microelectromechanical technologies for wireless communications. The project deals with the development and integration of radio frequency microelectromechanical devices that can reduce space and cost concomitant with enhanced performance. The outcomes of this proposal are devices with increased functionality required for multi-gigabit data rate transmission and millimetre wave wireless technologies.
Monolithic Integration of Silicon Waveguide and Ge1-xSix Photodetector on Silicon-on Insulator Platform for Intra-chip Optical Interconnect. Photonics has become the major technology underpinning the communication and storage of data. As photonics advances applications are emerging which demand components be manufactured cheaply in the manner achieved by the electronics industry in the silicon chip. Silicon is now emerging as an important photonic material and devices can benefit from inexpensiv ....Monolithic Integration of Silicon Waveguide and Ge1-xSix Photodetector on Silicon-on Insulator Platform for Intra-chip Optical Interconnect. Photonics has become the major technology underpinning the communication and storage of data. As photonics advances applications are emerging which demand components be manufactured cheaply in the manner achieved by the electronics industry in the silicon chip. Silicon is now emerging as an important photonic material and devices can benefit from inexpensive processing methods developed for electronics. This project aims to capture key intellectual property for monolithically integrating key photonic components onto a silicon platform. The project can bring social and commercial benefits to Australia such as high-level research and training in nanotechnology as well as opportunities for commercialisation in niche markets.Read moreRead less
Miniaturised Adiabatic Light Processing Devices. The project will develop, model and analyse a range of miniaturised light-processing devices for optical communications applications that rely soley on their geometrical design for their optical functionality. Such devices are less complex than devices that rely on other physical phenomena for their operation, such as interference, resonance or grating phenomena. They have potential application to a wide range of applications including optical tel ....Miniaturised Adiabatic Light Processing Devices. The project will develop, model and analyse a range of miniaturised light-processing devices for optical communications applications that rely soley on their geometrical design for their optical functionality. Such devices are less complex than devices that rely on other physical phenomena for their operation, such as interference, resonance or grating phenomena. They have potential application to a wide range of applications including optical telecommunications, optical sensing and biophotonics. The major outcome will be a range of novel devices that are very compact, have very low optical power loss and process light signals in ways that either cannot be readily achieved by other approaches or are simpler than other approaches.Read moreRead less
Special Research Initiatives - Grant ID: SR0354527
Funder
Australian Research Council
Funding Amount
$10,000.00
Summary
Frontier technologies, prototypes and strategic positioning for the international radio telescope, the Square Kilometre Array. This Network will forge new linkages between scientists and engineers to design and enable an advanced prototype for the international next-generation radio telescope, the Square Kilometre Array (SKA). The prototype will make fundamental new tests of general relativity and the physics of dark energy and test SKA imaging and signal processing systems. The Network partners ....Frontier technologies, prototypes and strategic positioning for the international radio telescope, the Square Kilometre Array. This Network will forge new linkages between scientists and engineers to design and enable an advanced prototype for the international next-generation radio telescope, the Square Kilometre Array (SKA). The prototype will make fundamental new tests of general relativity and the physics of dark energy and test SKA imaging and signal processing systems. The Network partners will collaborate to develop low-cost technologies for ultra-wideband antennas, high-speed signal processing, software radios, mitigation of man-made interference and the handling of petabyte data sets. The aim is a leading role for Australian researchers and industry in the $2 billion SKA.Read moreRead less
Novel Silicon-Based Photonic Devices. Silicon's pre-eminence in high-speed digital electronics does not extend to optoelectronics where the demand is for devices that can generate, guide, detect and process light. However, the properties of silicon are dramatically altered when it is reduced to nanometre dimensions. Advances in the understanding of such effects and in the fabrication and application of nanoscale silicon have provided the prospect of new and innovative Si-based photonic devices, ....Novel Silicon-Based Photonic Devices. Silicon's pre-eminence in high-speed digital electronics does not extend to optoelectronics where the demand is for devices that can generate, guide, detect and process light. However, the properties of silicon are dramatically altered when it is reduced to nanometre dimensions. Advances in the understanding of such effects and in the fabrication and application of nanoscale silicon have provided the prospect of new and innovative Si-based photonic devices, and of fully integrated electronic and photonic functionality. This project aims to extend the understanding of nanoscale silicon and to develop and prototype novel Si-based photonic devices based on this material.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE140100805
Funder
Australian Research Council
Funding Amount
$395,220.00
Summary
Radioisotope-powered Parallel Electron Lithography for High-throughput Nano-manufacturing. This project aims to realise rapid fabrication of controllable nano-devices over large areas with high throughput and low cost. The lack of large-size (greater than four inch) mask and ultra-low dose resist are the fundamental challenges for high-throughput radioisotope-powered parallel electron nano-lithography (RIPEL) systems. This project aims to realise a large-size RIPEL mask by using the ultra-light ....Radioisotope-powered Parallel Electron Lithography for High-throughput Nano-manufacturing. This project aims to realise rapid fabrication of controllable nano-devices over large areas with high throughput and low cost. The lack of large-size (greater than four inch) mask and ultra-low dose resist are the fundamental challenges for high-throughput radioisotope-powered parallel electron nano-lithography (RIPEL) systems. This project aims to realise a large-size RIPEL mask by using the ultra-light supporting material aerographite that has a state-of-the-art ratio value of Young's modulus to cubic density. It will also develop a new inorganic nanoparticle resist with ultra-low dose. These building blocks will enhance RIPEL's throughput by four orders of magnitude. The project will contribute to making processors or solid state storage cheaper and more efficient.Read moreRead less
Probing and harnessing the light-matter interactions in two-dimensional phosphorene. This project aims to investigate phosphorene, a new two-dimensional material, for the development of new optical and electronic devices. Such materials have unique optical and electronic properties due to their flat physical structure, which gives rise to strong interactions between light and matter. The expected outcome of this project will be new kinds of near infrared light emitting diodes, single photon emit ....Probing and harnessing the light-matter interactions in two-dimensional phosphorene. This project aims to investigate phosphorene, a new two-dimensional material, for the development of new optical and electronic devices. Such materials have unique optical and electronic properties due to their flat physical structure, which gives rise to strong interactions between light and matter. The expected outcome of this project will be new kinds of near infrared light emitting diodes, single photon emitters and ground-breaking lasers. These developments will enable the fabrication of new low-power light sources that can integrate with communication technologies now, and quantum communication technologies in the future.Read moreRead less
Generating Highly Entangled Photons from Nonlinear Monolayer Domes. This project aims to investigate novel monolayer domes for the development of high-performance quantum photon sources. This research expects to expand our understanding of fundamental physics of photon pair generation in nonlinear optical materials. Such monolayer domes have ultra-high optical nonlinearity, which gives rise to strong light-matter interactions and enables high-efficiency photon pair generation. The expected outco ....Generating Highly Entangled Photons from Nonlinear Monolayer Domes. This project aims to investigate novel monolayer domes for the development of high-performance quantum photon sources. This research expects to expand our understanding of fundamental physics of photon pair generation in nonlinear optical materials. Such monolayer domes have ultra-high optical nonlinearity, which gives rise to strong light-matter interactions and enables high-efficiency photon pair generation. The expected outcome is demonstration of a prototype light-weight and intense quantum photon source based on novel materials, which can be readily integrated with photonic circuits for quantum communication technologies. This research could strengthen the development of new industries and lead to job creation.Read moreRead less
Asymmetric InP-based structures for high power laser diodes at 1400-1500 nm for pumping optical amplifiers used in communication systems. This project is aimed at obtaining high power, single mode 1400-1500 nm wavelength laser diodes using a novel design of asymmetric InP-based structures. These devices are in great demand for pumping of erbium-doped and Raman amplifiers for powering the next generation of dense wavelength division multiplexing optical networks. The low modal gain (confinement f ....Asymmetric InP-based structures for high power laser diodes at 1400-1500 nm for pumping optical amplifiers used in communication systems. This project is aimed at obtaining high power, single mode 1400-1500 nm wavelength laser diodes using a novel design of asymmetric InP-based structures. These devices are in great demand for pumping of erbium-doped and Raman amplifiers for powering the next generation of dense wavelength division multiplexing optical networks. The low modal gain (confinement factor) of this asymmetric structure is expected to reduce internal losses and hence increase the output power with better thermal dissipation. Single mode could be obtained by careful design in the trade-off between filamentation and threshold current. Ion implantation is also proposed to suppress higher order modes.Read moreRead less
Ion implantation engineered photonic devices for use in highly integrated silicon optoelectronic circuits. This project establishes a collaboration with Canada's leading integrated silicon photonics research group thus tapping into years of valuable experience transferable to Australian-based researchers. The involvement of students as well as early career researchers ensures a new generation of Australian experts in this field. The importance of silicon photonics means that Australia must estab ....Ion implantation engineered photonic devices for use in highly integrated silicon optoelectronic circuits. This project establishes a collaboration with Canada's leading integrated silicon photonics research group thus tapping into years of valuable experience transferable to Australian-based researchers. The involvement of students as well as early career researchers ensures a new generation of Australian experts in this field. The importance of silicon photonics means that Australia must establish a strong research program in the area to maintain its current position as being at the forefront of leading-edge research. This is only possible through collaborations such as that proposed here.Read moreRead less