Enhanced productivity of coal seam gas wells by continuous gas circulation. This project aims to develop foam assisted continuous gas circulation for dewatering new and existing coal seam gas wells. The potential benefits of this new method include enhanced gas production, better well control, reduced costs and better environmental effectiveness. The proposed solution eliminates the need for mechanical pumps which are currently used for dewatering, and which fail regularly due to gas and solids ....Enhanced productivity of coal seam gas wells by continuous gas circulation. This project aims to develop foam assisted continuous gas circulation for dewatering new and existing coal seam gas wells. The potential benefits of this new method include enhanced gas production, better well control, reduced costs and better environmental effectiveness. The proposed solution eliminates the need for mechanical pumps which are currently used for dewatering, and which fail regularly due to gas and solids accumulation within the production wells. Continuous gas circulation could achieve significant savings in downtime and maintenance costs. In addition, reducing onsite maintenance will minimise access requirements for maintenance rigs which disrupt rural activities where the wells are located, thus easing local traffic and reduce the environmental impacts that are associated with well workovers.Read moreRead less
Engineering defect-intensive ozonation catalysts to degrade micropollutants. This project aims to engineer unique particles containing defect-intensive surfaces which are designed to accelerate the catalytic ozonation of waters contaminated with pharmaceuticals and other recalcitrant pollutants. This will enable timely treatment of industrial waste water as well as sewerage treatment plant effluents using simple and cheap catalyst materials. Wet- and flame-based particle fabrication technologies ....Engineering defect-intensive ozonation catalysts to degrade micropollutants. This project aims to engineer unique particles containing defect-intensive surfaces which are designed to accelerate the catalytic ozonation of waters contaminated with pharmaceuticals and other recalcitrant pollutants. This will enable timely treatment of industrial waste water as well as sewerage treatment plant effluents using simple and cheap catalyst materials. Wet- and flame-based particle fabrication technologies paired with unique post-synthesis treatment strategies, including either a coupled hydrogenation-illumination approach or plasma exposure, will be implemented for defect manipulation so as to produce new cheaper, stable, and higher-performing catalysts for activating ozone to treat water containing pharmaceutical and endocrine disrupting micro-pollutants under different process conditions.Read moreRead less
High-resolution optical studies of solids nucleation in cryogenic processes. During liquefied natural gas (LNG) production, low concentration impurities can freeze and block the cryogenic heat exchangers at the heart of the liquefaction process. Substantial knowledge gaps exist regarding the kinetics of these solids (i.e. the rate at which they form), especially at the part per million concentrations relevant to LNG. This project, in partnership with ExxonMobil Upstream Research Company, will us ....High-resolution optical studies of solids nucleation in cryogenic processes. During liquefied natural gas (LNG) production, low concentration impurities can freeze and block the cryogenic heat exchangers at the heart of the liquefaction process. Substantial knowledge gaps exist regarding the kinetics of these solids (i.e. the rate at which they form), especially at the part per million concentrations relevant to LNG. This project, in partnership with ExxonMobil Upstream Research Company, will use a proven high resolution optical technique to deliver new insight into solid nucleation and growth kinetics in the high-pressure cryogenic fluids that govern industrial blockage risk. The results will enable energy optimisation to increase liquefaction efficiency as well as tests of innovative blockage-remediation methods.Read moreRead less
Pore Engineering of Chromatography Membranes for Bioseparation. Protein separation and purification is an essential unit operation in manufacturing processes of therapeutic proteins. The project aims to advance the practical applications of chromatography membrane, an emerging technology for protein separation and purification, by tailoring membrane pore geometry and surface functionality to achieve enhanced separation performance. The project expects to generate advanced knowledge and technique ....Pore Engineering of Chromatography Membranes for Bioseparation. Protein separation and purification is an essential unit operation in manufacturing processes of therapeutic proteins. The project aims to advance the practical applications of chromatography membrane, an emerging technology for protein separation and purification, by tailoring membrane pore geometry and surface functionality to achieve enhanced separation performance. The project expects to generate advanced knowledge and techniques in the fields of reactive polymer synthesis, functional membrane fabrication and application in bioseparation. The innovative membranes developed in the project are able to improve the production capacity of therapeutic protein manufacturing processes, providing significant economic benefits to Australia.Read moreRead less
Doped alumina with tailored material properties for battery applications. This project aims to develop tailored alumina materials for lithium ion battery separators through a novel in-situ approach that will: (1) produce uniform doped alumina for improved safety, (2) target specific surface and bulk material properties to increase the overall performance, and (3) reduce manufacturing costs by integrating the process with new technology developed for the production of high purity alumina. Signifi ....Doped alumina with tailored material properties for battery applications. This project aims to develop tailored alumina materials for lithium ion battery separators through a novel in-situ approach that will: (1) produce uniform doped alumina for improved safety, (2) target specific surface and bulk material properties to increase the overall performance, and (3) reduce manufacturing costs by integrating the process with new technology developed for the production of high purity alumina. Significant advances are proposed for overcoming current manufacturing limitations of doped alumina. Building research capacity and knowledge in battery material manufacturing will benefit a range of industries across Australia, whilst providing new opportunities for growth in local communities.Read moreRead less
Low emission iron and steelmaking using hydrogen to pre-reduce lump ore. This project aims to develop and apply a new route of lump iron ore pre-reduction with hydrogen or H2-enriched gases for ironmaking to minimise CO2 emission from steel production. The route will be built up on the base of H2 reduction kinetics of iron ore and with novel technologies such as CO2 recycle and H2-heating using hot blast, underpinning the hydrogen economy by addressing the environmental concerns in mineral and s ....Low emission iron and steelmaking using hydrogen to pre-reduce lump ore. This project aims to develop and apply a new route of lump iron ore pre-reduction with hydrogen or H2-enriched gases for ironmaking to minimise CO2 emission from steel production. The route will be built up on the base of H2 reduction kinetics of iron ore and with novel technologies such as CO2 recycle and H2-heating using hot blast, underpinning the hydrogen economy by addressing the environmental concerns in mineral and steel industries. It is not only significant for low-carbon steel production, but also for better fundamental understanding to develop the future zero-emission iron and steelmaking with hydrogen. The project will be very beneficent because it increases the use of lump iron ore and expends Australian export of iron ores.Read moreRead less
Sustainable Water Reuse and Resource Recovery through Cost-Effective BNR. The recycling of treated wastewater effluents is needed to achieve water security, where very low nitrogen (N) and phosphorus (P) levels must be achieved for wastewater to be effectively recycled. This research investigates a more sustainable and cost-effective N&P removal process from wastewater, benefiting the environment and improving the viability of wastewater recycling. Phosphorus is a limited resource worldwide and ....Sustainable Water Reuse and Resource Recovery through Cost-Effective BNR. The recycling of treated wastewater effluents is needed to achieve water security, where very low nitrogen (N) and phosphorus (P) levels must be achieved for wastewater to be effectively recycled. This research investigates a more sustainable and cost-effective N&P removal process from wastewater, benefiting the environment and improving the viability of wastewater recycling. Phosphorus is a limited resource worldwide and will be effectively recovered in the process to be used as a fertiliser. This project develops wastewater treatment process tools, solutions and management strategies that addresses the current challenges of how optimal nutrient removal and recovery from wastewater is achieved, enabling water recycling and saving costs.Read moreRead less
Nano-engineered catalysts for sustainable fuel production from waste . This project aims to address two major problems simultaneously-reducing the burden of non-recyclable waste currently going to landfill in Australia, and offsetting Australia’s reliance on imported diesel to support industry and transport needs. While approximately 95% of diesel consumed in Australia is imported, vast quantities of carbon-based waste ends up in landfill. Municipal Solid Waste (MSW) is a mixture of plant-based ....Nano-engineered catalysts for sustainable fuel production from waste . This project aims to address two major problems simultaneously-reducing the burden of non-recyclable waste currently going to landfill in Australia, and offsetting Australia’s reliance on imported diesel to support industry and transport needs. While approximately 95% of diesel consumed in Australia is imported, vast quantities of carbon-based waste ends up in landfill. Municipal Solid Waste (MSW) is a mixture of plant-based waste (including food, garden, paper, and wood) and fossil-fuel derived materials (plastics). Using an innovative and environmentally-sustainable catalytic process, the outcomes of this project are aimed alleviating Australia’s dependence on diesel fuel imports and better waste management solutions in Australia.Read moreRead less
Regeneration of High Value-Added Materials from Spent Lithium-Ion Batteries. This project aims to develop scalable processing techniques for the regeneration of cathode materials and the production of high-purity alumina and graphene from spent lithium-ion batteries. The techniques reduce the cost and time of the processing of degraded cathode materials and increase the value of the spent battery materials (e.g., metallic aluminum and graphite) by converting them into high value-added specialty ....Regeneration of High Value-Added Materials from Spent Lithium-Ion Batteries. This project aims to develop scalable processing techniques for the regeneration of cathode materials and the production of high-purity alumina and graphene from spent lithium-ion batteries. The techniques reduce the cost and time of the processing of degraded cathode materials and increase the value of the spent battery materials (e.g., metallic aluminum and graphite) by converting them into high value-added specialty chemicals. The outcomes and further technology adoptions will extend the capacity of the Partner Organisation for producing specialty battery materials. The outcomes could help Australia’s battery industry switch to a more diversified pathway, which benefits the economic development of Australia in a long term.Read moreRead less
Design a Targeted Delivery System for Probiotics. The project aims to improve the effectiveness of probiotics by developing a targeted delivery system to the colon. This interdisciplinary research will generate new knowledge in the field of microbiota and develop new delivery systems for live microorganisms and other active compounds. Expected outcomes include increased understanding of the factors affecting the viability of probiotics during storage and passage through the gastro-intestinal tra ....Design a Targeted Delivery System for Probiotics. The project aims to improve the effectiveness of probiotics by developing a targeted delivery system to the colon. This interdisciplinary research will generate new knowledge in the field of microbiota and develop new delivery systems for live microorganisms and other active compounds. Expected outcomes include increased understanding of the factors affecting the viability of probiotics during storage and passage through the gastro-intestinal tract, the establishment of probiotics into gut flora, and how this incorporation affects the dynamics of gut microbiota. The new technology can be utilised across a wide range of therapeutics that target the colon to promote the well-being of our society through commercialisation by industry partner.Read moreRead less