Role of Reactive Particles in Explosive Emulsions. Concentrated water-in oil explosive emulsions are widely used in the minerals industry because they are cheap, easily detonated and relatively safe to handle. Their explosive energy can be significantly increased when reactive particles are introduced into the emulsion matrix. To do this, the interaction between the solid, oil, and water phases needs to be optimised. This investigation will increase our basic understanding of the physical and ch ....Role of Reactive Particles in Explosive Emulsions. Concentrated water-in oil explosive emulsions are widely used in the minerals industry because they are cheap, easily detonated and relatively safe to handle. Their explosive energy can be significantly increased when reactive particles are introduced into the emulsion matrix. To do this, the interaction between the solid, oil, and water phases needs to be optimised. This investigation will increase our basic understanding of the physical and chemical interactions that occur between the particle and the oil-water interface, and develop a more efficient explosive that can be produced continuously on a commercial scale.Read moreRead less
NOVEL Fe-Cr OXIDE AND SKELETAL (RANEY) CATALYSTS FOR WATER GAS SHIFT REACTION. The water gas shift reaction has an importance implication in the control of carbon monoxide/hydrogen ratios of gas mixtures used during the synthesis of methanol, diesel and hydrogen. The research study aims to develop and characterise Fe-Cr oxide and chromia-promoted Raney Cu catalysts for water gas shift reaction using a tube wall reactor. The catalyst fabrication is based on leaching and electrochemical deposition ....NOVEL Fe-Cr OXIDE AND SKELETAL (RANEY) CATALYSTS FOR WATER GAS SHIFT REACTION. The water gas shift reaction has an importance implication in the control of carbon monoxide/hydrogen ratios of gas mixtures used during the synthesis of methanol, diesel and hydrogen. The research study aims to develop and characterise Fe-Cr oxide and chromia-promoted Raney Cu catalysts for water gas shift reaction using a tube wall reactor. The catalyst fabrication is based on leaching and electrochemical deposition to promote the catalytic activity. The produced catalysts will be characterised and tested for catalytic activity, temperature stability and other physical properties to determine fundamental understanding for future commercial applications.Read moreRead less
A green technology for liquefied natural gas (LNG) regasification. Upon arrival to its destination, the liquefied natural gas (LNG) exported from Australia must be converted back into gas to make it suitable for distribution to end users, for which the current technologies burn up to two per cent our LNG exports. This project will design a technology that will use the energy of ambient air, which will not only increase the profit but also reduce carbon dioxide emissions.
Dry Processing of Fine Coal Using the Reflux Classifier. New and efficient separation technologies are crucial for developing the concept of Dry Coal Processing. The benefits to the industry of Dry Processing are compelling, with savings in water consumption, and much larger savings in dewatering and transportation of the product. The Reflux Classifier is a new fluidized bed technology developed in Australia using the more conventional water fluidization approach. Already the technology is contr ....Dry Processing of Fine Coal Using the Reflux Classifier. New and efficient separation technologies are crucial for developing the concept of Dry Coal Processing. The benefits to the industry of Dry Processing are compelling, with savings in water consumption, and much larger savings in dewatering and transportation of the product. The Reflux Classifier is a new fluidized bed technology developed in Australia using the more conventional water fluidization approach. Already the technology is contributing to Australian exports in the rapidly growing area of mining services. The purpose of this project is to establish its potential for use in the Dry Processing of fine coal. Other benefits of the study include the education and training of researchers in this field.Read moreRead less
A skin-on-a-chip device for investigating wound healing. This project aims to research the mechanism of skin wound healing. It will design a skin-on-a-chip microfluidic device that mimics human skin in vitro. This device will reduce the need for animal studies and assess how active compounds heal wounds. This project will design smart polymers with superior properties for controlled delivery of multiple active compounds in this device and choose the most effective combination of compounds to boo ....A skin-on-a-chip device for investigating wound healing. This project aims to research the mechanism of skin wound healing. It will design a skin-on-a-chip microfluidic device that mimics human skin in vitro. This device will reduce the need for animal studies and assess how active compounds heal wounds. This project will design smart polymers with superior properties for controlled delivery of multiple active compounds in this device and choose the most effective combination of compounds to boost skin healing rate. This knowledge may ultimately be used to develop wound dressings that maximise healing rate for various skin defects such as chronic wounds and decrease health care costs.Read moreRead less
Sequestration of CO2 with enhanced methane recovery from deep coal. Coal and gas represent the main energy source for the Australian and many other national economies into the foreseeable future. The continuing use of these critical resources requires that greenhouse gas emission issues be addressed. Any serious attempt to achieve reduced emission of CO2 from power generation requires sequestration as a necessary element. A plausible method for cost effective sequestration of large amounts of ....Sequestration of CO2 with enhanced methane recovery from deep coal. Coal and gas represent the main energy source for the Australian and many other national economies into the foreseeable future. The continuing use of these critical resources requires that greenhouse gas emission issues be addressed. Any serious attempt to achieve reduced emission of CO2 from power generation requires sequestration as a necessary element. A plausible method for cost effective sequestration of large amounts of CO2 is by geological fixing in deep, unminable coal. The key technological and scientific issues regarding capacity, rate, technical viability and site selection form the basis of this proposal.Read moreRead less
Development of constitutive models for concentrated suspensions via particle-level simulations. The outcome of this work will be a comprehensive theoretical framework by which accurate microstructural information is distilled into a macro-scale constitutive model of particulate suspensions, readily useable for modelling of practical industrial applications. This work will have a direct impact on the design capability and performance of a wide range of mechanisms and industrial processes involvin ....Development of constitutive models for concentrated suspensions via particle-level simulations. The outcome of this work will be a comprehensive theoretical framework by which accurate microstructural information is distilled into a macro-scale constitutive model of particulate suspensions, readily useable for modelling of practical industrial applications. This work will have a direct impact on the design capability and performance of a wide range of mechanisms and industrial processes involving suspensions. The development of better models for industrially useful suspensions offers a competitive advantage for a diverse range of Australia industry, from the food preparation sector, to mineral slurry transport, and water filtration and recycling.Read moreRead less
Gassing Mechanism and Stability of Foamed Explosive Emulsions. Mining of minerals such as coal involves crushing the surrounding rock strata, or the mineral ore itself, with emulsion explosives. One of the most important properties determining suitability of an emulsion explosive to a particular mining operation is its velocity of detonation, which can be adjusted by varying the number and size of air bubbles distributed in the emulsion matrix. The present project aims to develop new ways of g ....Gassing Mechanism and Stability of Foamed Explosive Emulsions. Mining of minerals such as coal involves crushing the surrounding rock strata, or the mineral ore itself, with emulsion explosives. One of the most important properties determining suitability of an emulsion explosive to a particular mining operation is its velocity of detonation, which can be adjusted by varying the number and size of air bubbles distributed in the emulsion matrix. The present project aims to develop new ways of generating air bubbles, to gain fundamental understanding of the foaming mechanism in currently used gassing techniques, and to invent ways to stabilise large bubbles within the emulsion. The project will provide scientific underpinning for the development of a new range of emulsion explosives manufactured by Orica for Australian and international markets, maintaining the Orica's position as a leader in the field of emulsion explosives.Read moreRead less
Novel technology to sensitise emulsion explosives. The project will develop a new technology for more efficient and safer extraction of minerals. It will extend the application of emulsion explosives to low-temperatures and will eliminate the heating of emulsion blasting agents during transport. Since mining operations are located in regional areas, the project will bring benefits to local and rural communities. The project will also generate new knowledge on the behaviour and stability of th ....Novel technology to sensitise emulsion explosives. The project will develop a new technology for more efficient and safer extraction of minerals. It will extend the application of emulsion explosives to low-temperatures and will eliminate the heating of emulsion blasting agents during transport. Since mining operations are located in regional areas, the project will bring benefits to local and rural communities. The project will also generate new knowledge on the behaviour and stability of three-phase systems that contain very small gas bubbles. In addition to its fundamental importance, this knowledge can be carried over to food and cosmetic industries to facilitate the development of new products.Read moreRead less
Microstructural mechanisms of magnetorheological suspensions. A magnetorheological suspension (MRS) is a "smart material" which shows an enormous but reversible increase in flow resistance upon application of a magnetic field. These tunable fluids have many engineering applications, such as in adjustable vibration damping systems. This project comprises a series of innovative experiments and computer simulations, which will lead to a predictive constitutive model. We will investigate the underly ....Microstructural mechanisms of magnetorheological suspensions. A magnetorheological suspension (MRS) is a "smart material" which shows an enormous but reversible increase in flow resistance upon application of a magnetic field. These tunable fluids have many engineering applications, such as in adjustable vibration damping systems. This project comprises a series of innovative experiments and computer simulations, which will lead to a predictive constitutive model. We will investigate the underlying physical mechanisms governing the mechanical response of MRS, including the behaviour under small strains and under squeeze flow, the effects of rheometer wall conditions, and the role of matrix viscoelasticity or viscoplasticity.Read moreRead less