Novel gas-liquid columns for liquefied natural gas (LNG) production. Novel gas-liquid columns for liquefied natural gas (LNG) production. This project aims to design distillation and absorption columns, perhaps the most important unit operations in a liquefied natural gas (LNG) plant, and whose optimization is integral to overall performance of any LNG plant. This project will use 3D printers to rapidly prototype concepts of columns and their internals, and test them using flow characterization ....Novel gas-liquid columns for liquefied natural gas (LNG) production. Novel gas-liquid columns for liquefied natural gas (LNG) production. This project aims to design distillation and absorption columns, perhaps the most important unit operations in a liquefied natural gas (LNG) plant, and whose optimization is integral to overall performance of any LNG plant. This project will use 3D printers to rapidly prototype concepts of columns and their internals, and test them using flow characterization tools and numerical models. The final outcome of the project will be a set of designs of the columns, which should be more efficient, safer and cheaper to operate, and have smaller physical and environmental footprints, thus helping the Australian LNG industry to stay globally competitive.Read moreRead less
Vaporization of heavier gas oil in Fluid Catalytic Cracking risers. Fluid Catalytic Cracking (FCC) is an important refinery operation responsible for about 45 per cent of the total petrol produced. The project is aimed at improving production efficiency of Australian refineries by applying fundamental modelling to the FCC. The outcomes will enable refiners to produce cleaner fuel and decrease greenhouse gas emissions.
Engineering floating liquid marbles for three-dimensional cell cultures. This project aims to understand the physics of three-dimensional cell cultures in a liquid marble floating on a liquid free surface. New methodology developed can produce these cell cultures without using matrices or scaffolds and with run-times well beyond existing technologies. This methodology closely mimics a normal in-vivo environment and produces spheroids needed in cell transplantation therapies. This project will re ....Engineering floating liquid marbles for three-dimensional cell cultures. This project aims to understand the physics of three-dimensional cell cultures in a liquid marble floating on a liquid free surface. New methodology developed can produce these cell cultures without using matrices or scaffolds and with run-times well beyond existing technologies. This methodology closely mimics a normal in-vivo environment and produces spheroids needed in cell transplantation therapies. This project will resolve uncertainties in the underlying phenomena. The expected outcome should support future high quality cell cultures suitable for transplantation therapies.Read moreRead less
Improving the scale-up of spray drying for bioactive extracts and fibres. The project will develop new processing techniques that will contribute to better functional foods and bioactive products from fruit and vegetable wastes. The total national crop of fruit and vegetables produces over 3 million tonnes of wastes, where the bioactive materials in the wastes have a potential value of $3 billion/year.
Dynamic Controllability Analysis for Plantwide Process Design and Control. World-wide chemical plants represent many billions of dollars of investment. Improvements to the process designs in terms of controllability would have the potential to provide large economic benefits, as it implies improved productivity, reduced operating costs and product variability. This proposed research will be a step towards integration of process design and control, which has been widely recognized as the key to t ....Dynamic Controllability Analysis for Plantwide Process Design and Control. World-wide chemical plants represent many billions of dollars of investment. Improvements to the process designs in terms of controllability would have the potential to provide large economic benefits, as it implies improved productivity, reduced operating costs and product variability. This proposed research will be a step towards integration of process design and control, which has been widely recognized as the key to this improvement. The outcomes from this project may be readily implemented in process design practice, and therefore have a direct impact to the Australian and world-wide process industries, helping to build a more efficient and environmental conscious Australian process industries.Read moreRead less
Development of a novel desalination process. The process proposed in this submission provides a simple, flexible and cost effective platform for small-scale desalination applications. The proposed process can be an integral part of a more comprehensive approach to resolve the shortage of freshwater in arid to semi-arid regions of rural Australia. This will contribute to the Federal Government's National Research Priority 1: An Environmentally Sustainable Australia, particularly the priority goal ....Development of a novel desalination process. The process proposed in this submission provides a simple, flexible and cost effective platform for small-scale desalination applications. The proposed process can be an integral part of a more comprehensive approach to resolve the shortage of freshwater in arid to semi-arid regions of rural Australia. This will contribute to the Federal Government's National Research Priority 1: An Environmentally Sustainable Australia, particularly the priority goal 'Water - a Critical Resource'.Read moreRead less
Flow process and visible-light driven reactions for polymer manufacturing. This project aims to develop rapid, scalable light-driven continuous flow processing techniques that allow the production of value-added synthetic polymers that cannot be achieved by existing technologies. The project will take advantage of the spatio-temporal control of the light mediated polymerisation with flow process to achieve control over the primary structure, the sequential arrangement of monomer units in a polym ....Flow process and visible-light driven reactions for polymer manufacturing. This project aims to develop rapid, scalable light-driven continuous flow processing techniques that allow the production of value-added synthetic polymers that cannot be achieved by existing technologies. The project will take advantage of the spatio-temporal control of the light mediated polymerisation with flow process to achieve control over the primary structure, the sequential arrangement of monomer units in a polymer chain and the molecular weight distribution. The project will result in the preparation of functional polymers containing a specific arrangement of monomers in the polymer chain and a precise distribution of polymer chains. The development of such process will result in the development of advanced materials.Read moreRead less
Bio-inspired Nanoparticles for Mechano-Regulation of Stem Cell Fate. Mechanical stimulation plays a critical role in regulating stem cell fate. Nanostructure-mediated mechanical cues can precisely stimulate stem cells, but predicting their impact on stem cell differentiation is challenging. This project aims to engineer nanostructures to regulate stem cell fate and gain a fundamental understanding of the mechanical properties that affect cell function. The expected outcomes and benefits of this ....Bio-inspired Nanoparticles for Mechano-Regulation of Stem Cell Fate. Mechanical stimulation plays a critical role in regulating stem cell fate. Nanostructure-mediated mechanical cues can precisely stimulate stem cells, but predicting their impact on stem cell differentiation is challenging. This project aims to engineer nanostructures to regulate stem cell fate and gain a fundamental understanding of the mechanical properties that affect cell function. The expected outcomes and benefits of this project include a new fundamental understanding of the effect of mechanical properties on cell function, novel insights into the regulation of stem cell fate, and the development of a new class of roughness-tunable materials suitable for use in tissue engineering and pharmaceutical applications. Read moreRead less
Manufacturing Nanostructured Polymer Thin Films using Visible Light. This research aims the development of selective photochemical tools driven by different colours of light for the fabrication of nanostructured polymer brush thin films. By using different wavelengths to selectively activate specific chemical reactions, this will enable multiple reactions to be performed simultaneously, significantly streamlining fabrication. Additionally, the increased selectivity offers pathways to more sophis ....Manufacturing Nanostructured Polymer Thin Films using Visible Light. This research aims the development of selective photochemical tools driven by different colours of light for the fabrication of nanostructured polymer brush thin films. By using different wavelengths to selectively activate specific chemical reactions, this will enable multiple reactions to be performed simultaneously, significantly streamlining fabrication. Additionally, the increased selectivity offers pathways to more sophisticated nanoarchitectures in comparison to existing methods. This research will lead to the fabrication of 3D polymer brush architectures with unparalleled precision, which will be of high scientific and industrial value for a diverse range of applications, such as optoelectronics, nanoactuation, and sensing.Read moreRead less
Influence of adsorbed surfactants on three phase contact line motion at high capillary number. The interaction between thin films and solid surfaces underpins the performance of a number of value-adding industrial processes, most notably metallurgical coating operations. Typically, these operations are performed at speeds well beyond the range of existing models, thereby limiting their value when changes in operation occur or when there are problems with product quality. Existing models are also ....Influence of adsorbed surfactants on three phase contact line motion at high capillary number. The interaction between thin films and solid surfaces underpins the performance of a number of value-adding industrial processes, most notably metallurgical coating operations. Typically, these operations are performed at speeds well beyond the range of existing models, thereby limiting their value when changes in operation occur or when there are problems with product quality. Existing models are also limited by their inability to account for the presence of surfactants commonly used throughout industry. This study will produce a capability for predicting how velocity and local changes in molecular composition affect the wetting/dewetting of coated surfaces.Read moreRead less