Novel gas-liquid columns for liquefied natural gas (LNG) production. Novel gas-liquid columns for liquefied natural gas (LNG) production. This project aims to design distillation and absorption columns, perhaps the most important unit operations in a liquefied natural gas (LNG) plant, and whose optimization is integral to overall performance of any LNG plant. This project will use 3D printers to rapidly prototype concepts of columns and their internals, and test them using flow characterization ....Novel gas-liquid columns for liquefied natural gas (LNG) production. Novel gas-liquid columns for liquefied natural gas (LNG) production. This project aims to design distillation and absorption columns, perhaps the most important unit operations in a liquefied natural gas (LNG) plant, and whose optimization is integral to overall performance of any LNG plant. This project will use 3D printers to rapidly prototype concepts of columns and their internals, and test them using flow characterization tools and numerical models. The final outcome of the project will be a set of designs of the columns, which should be more efficient, safer and cheaper to operate, and have smaller physical and environmental footprints, thus helping the Australian LNG industry to stay globally competitive.Read moreRead less
Flow process and visible-light driven reactions for polymer manufacturing. This project aims to develop rapid, scalable light-driven continuous flow processing techniques that allow the production of value-added synthetic polymers that cannot be achieved by existing technologies. The project will take advantage of the spatio-temporal control of the light mediated polymerisation with flow process to achieve control over the primary structure, the sequential arrangement of monomer units in a polym ....Flow process and visible-light driven reactions for polymer manufacturing. This project aims to develop rapid, scalable light-driven continuous flow processing techniques that allow the production of value-added synthetic polymers that cannot be achieved by existing technologies. The project will take advantage of the spatio-temporal control of the light mediated polymerisation with flow process to achieve control over the primary structure, the sequential arrangement of monomer units in a polymer chain and the molecular weight distribution. The project will result in the preparation of functional polymers containing a specific arrangement of monomers in the polymer chain and a precise distribution of polymer chains. The development of such process will result in the development of advanced materials.Read moreRead less
Manufacturing Nanostructured Polymer Thin Films using Visible Light. This research aims the development of selective photochemical tools driven by different colours of light for the fabrication of nanostructured polymer brush thin films. By using different wavelengths to selectively activate specific chemical reactions, this will enable multiple reactions to be performed simultaneously, significantly streamlining fabrication. Additionally, the increased selectivity offers pathways to more sophis ....Manufacturing Nanostructured Polymer Thin Films using Visible Light. This research aims the development of selective photochemical tools driven by different colours of light for the fabrication of nanostructured polymer brush thin films. By using different wavelengths to selectively activate specific chemical reactions, this will enable multiple reactions to be performed simultaneously, significantly streamlining fabrication. Additionally, the increased selectivity offers pathways to more sophisticated nanoarchitectures in comparison to existing methods. This research will lead to the fabrication of 3D polymer brush architectures with unparalleled precision, which will be of high scientific and industrial value for a diverse range of applications, such as optoelectronics, nanoactuation, and sensing.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0346822
Funder
Australian Research Council
Funding Amount
$538,000.00
Summary
Polymer Optical Fibre Drawing Facility. A revolutionary new technology is emerging in polymer optical fibres, sparked by an important breakthrough in polymer optical fibres that was achieved last year by researchers at the University of Sydney. Therefore, Australia currently has a unique and short-lived opportunity to firmly establish themselves as the world leaders of this technology, provided the infrastructure to realise the novel concepts is available. We request funding for a high-quality p ....Polymer Optical Fibre Drawing Facility. A revolutionary new technology is emerging in polymer optical fibres, sparked by an important breakthrough in polymer optical fibres that was achieved last year by researchers at the University of Sydney. Therefore, Australia currently has a unique and short-lived opportunity to firmly establish themselves as the world leaders of this technology, provided the infrastructure to realise the novel concepts is available. We request funding for a high-quality polymer optical fibre draw tower to enable this. The collaborating institutions will be fabricating a range of different polymer optical fibres, targeting specific applications in optical sensing and telecommunications.Read moreRead less
The Identification and Development of Strategies for Increasing Engineering Enrolments. There is a continuing nation-wide decline in high school student enrolment in higher level mathematics and science. This is already leading to a reduction in the number of students undertaking university engineering programs in Australia and the situation is expected to worsen. This project is directed toward a better understanding of the reasons for the trend and the development of strategies to reverse it. ....The Identification and Development of Strategies for Increasing Engineering Enrolments. There is a continuing nation-wide decline in high school student enrolment in higher level mathematics and science. This is already leading to a reduction in the number of students undertaking university engineering programs in Australia and the situation is expected to worsen. This project is directed toward a better understanding of the reasons for the trend and the development of strategies to reverse it. It aims to 1. Evaluate the most effective strategies that increase student's interests and understanding of engineering and increase participation in engineering studies. 2. Develop an optimised national communication strategy for promoting engineering studies to secondary students.Read moreRead less
Understanding mud pumping in heavy haul railroads. This project aims to examine the factors that cause mud pumping and evaluate the effectiveness of sub-surface drainage to prevent rail track instability. Fast heavy haul operations (such as loads used in mining and agriculture) impart repeated loads on the natural formation that can result in mud pumping. If the build-up of water pressure becomes excessive this can cause track failure. Through an experimental program and field study, the mechani ....Understanding mud pumping in heavy haul railroads. This project aims to examine the factors that cause mud pumping and evaluate the effectiveness of sub-surface drainage to prevent rail track instability. Fast heavy haul operations (such as loads used in mining and agriculture) impart repeated loads on the natural formation that can result in mud pumping. If the build-up of water pressure becomes excessive this can cause track failure. Through an experimental program and field study, the mechanisms of mud pumping, incorporating train loads and frequencies, will be studied, and the role of vertically installed drains will be quantified for improved practical design. The project aims to contribute to improved track longevity and reduced maintenance costs, with a corresponding boost in rail productivity.Read moreRead less
Seismic analysis of cracking and deformations in concrete gravity dams. This project aims to establish a rational predictive capability for the responses of concrete gravity dams subject to extreme design earthquakes. This will include the development of innovative numerical methods for effective modelling of crack propagation and closure, large slips on crack faces and weak interfaces, dam-reservoir interaction, dam-foundation interaction and automatic mesh generation. The expected outcomes of ....Seismic analysis of cracking and deformations in concrete gravity dams. This project aims to establish a rational predictive capability for the responses of concrete gravity dams subject to extreme design earthquakes. This will include the development of innovative numerical methods for effective modelling of crack propagation and closure, large slips on crack faces and weak interfaces, dam-reservoir interaction, dam-foundation interaction and automatic mesh generation. The expected outcomes of the project will be a significantly improved prediction tool. It is also anticipated that the project will result in improvements in dam and public safety, and more efficient use of funds for dam safety upgrades and management.Read moreRead less
Industrial Transformation Training Centres - Grant ID: IC230100015
Funder
Australian Research Council
Funding Amount
$5,000,000.00
Summary
ARC Training Centre for Whole Life Design of Carbon Neutral Infrastructure. This Centre aims to transform the capability of civil infrastructure stakeholders to design, construct, operate and dispose of infrastructure in a carbon neutral way. By training industry-embedded PhDs and postdocs in the methodology and technology required to design out excess carbon of infrastructure in its whole life, this Centre expects to lead the world in sustainable infrastructure design, enabling a new generation ....ARC Training Centre for Whole Life Design of Carbon Neutral Infrastructure. This Centre aims to transform the capability of civil infrastructure stakeholders to design, construct, operate and dispose of infrastructure in a carbon neutral way. By training industry-embedded PhDs and postdocs in the methodology and technology required to design out excess carbon of infrastructure in its whole life, this Centre expects to lead the world in sustainable infrastructure design, enabling a new generation of infrastructure design in Australia and internationally. Achieving carbon neutral infrastructure in its whole life will bring significant far-reaching benefits, including equipping industry with tools required to meet Australia’s emission reduction targets as well as economic, commercial, environmental, and social gains.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE130100133
Funder
Australian Research Council
Funding Amount
$400,000.00
Summary
National Facility for Physical Blast Simulation (NFPBS). Recent terrorist attacks employing large quantities of high explosives have prompted the international demand for experimental investigation of civil infrastructure response to shock wave loadings. The National Facility for Physical Blast Simulation (NFPBS) is one of only a few in the world that are suitable for conducting experimental research via a physically generated blast approach.
Erosion of embankment dams and dam spillways. In excess of $250M is spent annually to maintain, upgrade, improve safety and monitor performance of Australian dams. Improved methods for assessing both spillway and internal erosion, the cause of 50 per cent of embankment dam failures and incidents requiring repairs, will be developed, maximising dam safety and minimising maintenance expenditure.