Polymerization of amyloid fibrils and electroactive hybrid nanowires using ionic liquids. The electronics world is constantly shrinking with devices being miniaturised and increasing levels of complexity built in. To maintain this trend, new technologies and new device fabrication approaches are required. APD Byrne, will develop new materials based on amyloid fibrils by their facile conversion to a range of novel high strength electroactive nanoscopic wires with application in many electronic d ....Polymerization of amyloid fibrils and electroactive hybrid nanowires using ionic liquids. The electronics world is constantly shrinking with devices being miniaturised and increasing levels of complexity built in. To maintain this trend, new technologies and new device fabrication approaches are required. APD Byrne, will develop new materials based on amyloid fibrils by their facile conversion to a range of novel high strength electroactive nanoscopic wires with application in many electronic devices. One such device that will benefit from these nanowires is organic solar cells. Solar is a clean renewable energy source that can reduce Australia's dependence on fossil fuels. The development of new approaches and materials aimed at increasing solar cell efficiencies is an important outcome for Australia.Read moreRead less
New Surfaces for the Control of Endothelial Cell Function: Application in the Design of Biocompatible Stents. Using dewetting of thin polymer films, the present proposal will develop new structured biocompatible surfaces with controlled chemistry and topography, which will allow the growth of a normal (non-activated) monolayer of endothelial cells. Sophisticated molecular parameters will be used to assess that endothelial cells maintain their normal quiescent phenotype. The project sets the grou ....New Surfaces for the Control of Endothelial Cell Function: Application in the Design of Biocompatible Stents. Using dewetting of thin polymer films, the present proposal will develop new structured biocompatible surfaces with controlled chemistry and topography, which will allow the growth of a normal (non-activated) monolayer of endothelial cells. Sophisticated molecular parameters will be used to assess that endothelial cells maintain their normal quiescent phenotype. The project sets the ground work for the design of improved, more biocompatible structured stents to minimise the abnormal growth of cells on and around the stent, thereby reducing the occurrence of vascular complications. Thus this research could improve the success rate of stents implanted into patients with cardiovascular disease and reduce health costs.Read moreRead less
Synthesis of Novel Biomaterials for Drug delivery. A new UV radiation polymerisation technique utilising charge-transfer complexes is adopted for synthesising novel hydrogels, a group of biomaterials for drug delivery. This work is significant as charge-transfer complexes, pertinent to the formation of hydrogels, form copolymers within the hydrogel matrices. This eliminates using costly, yet undesirable photo-initiators (PI), thus rendering the hydrogels as cleaner (PI-free) and more economical ....Synthesis of Novel Biomaterials for Drug delivery. A new UV radiation polymerisation technique utilising charge-transfer complexes is adopted for synthesising novel hydrogels, a group of biomaterials for drug delivery. This work is significant as charge-transfer complexes, pertinent to the formation of hydrogels, form copolymers within the hydrogel matrices. This eliminates using costly, yet undesirable photo-initiators (PI), thus rendering the hydrogels as cleaner (PI-free) and more economical in production; the products present themselves as ideal treatment methods in the controlled-release of drugs, specifically targeting localised pathological sites of interest. The research findings will be invaluable to medical practices, leading to the creation of new industries in Australia.
Read moreRead less
Soft solids rheology and filled elastomeric networks. Elastomeric networks that have imbedded particles are considerably more difficult to model than unfilled networks because the imbedded particles deform the trajectory of the chains. Any treatment must incorporate this dual nature of the network. Our work will address this important issue with particular reference to two important materials - liquid crystalline elastomers and bread dough. We aim to produce an accurate mathematical description ....Soft solids rheology and filled elastomeric networks. Elastomeric networks that have imbedded particles are considerably more difficult to model than unfilled networks because the imbedded particles deform the trajectory of the chains. Any treatment must incorporate this dual nature of the network. Our work will address this important issue with particular reference to two important materials - liquid crystalline elastomers and bread dough. We aim to produce an accurate mathematical description of filled soft viscoelastic solids, which include compressibility and yielding - two important new features.Read moreRead less
Creation of functional surfaces for biodevices and aerospace applications. Polymers are poised to become the materials of choice for a host of applications because of their lightness, strength, ease of forming and biocompatibility. The major challenge lies in optimising their surfaces for each application. For biodevices in particular, the surfaces must support a range of complex and specific interactions. This project will create new polymer surface modifications through innovations in plasma s ....Creation of functional surfaces for biodevices and aerospace applications. Polymers are poised to become the materials of choice for a host of applications because of their lightness, strength, ease of forming and biocompatibility. The major challenge lies in optimising their surfaces for each application. For biodevices in particular, the surfaces must support a range of complex and specific interactions. This project will create new polymer surface modifications through innovations in plasma science and technology. The outcomes will be new surfaces for diagnostic arrays in medicine, biosensors and durable polymer surfaces for low earth orbit.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0347937
Funder
Australian Research Council
Funding Amount
$300,000.00
Summary
Imaging Raman Spectrometer. An Imaging Raman spectrometer generates image maps 10x faster than older instruments and is required to meet escalating demand. This results from innovative use of Raman to characterise organics, polymers, thin films and biomaterials, which underpins rapidly evolving research in nanotechnology and biotechnology. Many innovations have come from QUT's Centre for Instrumental and Developmental Chemistry, which will host the spectrometer and is a key resource for all Qu ....Imaging Raman Spectrometer. An Imaging Raman spectrometer generates image maps 10x faster than older instruments and is required to meet escalating demand. This results from innovative use of Raman to characterise organics, polymers, thin films and biomaterials, which underpins rapidly evolving research in nanotechnology and biotechnology. Many innovations have come from QUT's Centre for Instrumental and Developmental Chemistry, which will host the spectrometer and is a key resource for all Queensland universities. The availability of its high quality spectroscopic facility has enabled leading edge developments by local companies and the Imaging Raman spectrometer will significantly accelerate and enhance current and future project outcomes.Read moreRead less
Novel Biomimetic Nanosprings:Protein-based Elastomer for Engineering Applications. The ability to produce biomimetic elastomeric components with approximately infinite fatigue life offers significant impact on energy consumption and materials usage. In this project, we seek this goal by bio-macromolecular modification and understanding of the unique proteins from a number of different insects that provide the structural basis of novel bioelastomers with outstanding in-vitro fatigue properties. T ....Novel Biomimetic Nanosprings:Protein-based Elastomer for Engineering Applications. The ability to produce biomimetic elastomeric components with approximately infinite fatigue life offers significant impact on energy consumption and materials usage. In this project, we seek this goal by bio-macromolecular modification and understanding of the unique proteins from a number of different insects that provide the structural basis of novel bioelastomers with outstanding in-vitro fatigue properties. The project will translate the superior in-vivo properties of these proteins to real-world novel bioelastomers for engineering applications. Such functional materials will find potential use in areas such as microelectromechanical devices (MEMS), actuators, artificial muscles, drug delivery vehicles, etc.Read moreRead less
Bioactive Polymers for Wound Healing Applications. VitroGroR is a growth factor complex which enhances cell growth and migration, and hence has great potential for treating wounds. Tissue Therapies, which holds the rights to commercialization of VitroGroR, is seeking to develop methods of delivering VitroGroR in its active form to the wound environment. Two solutions to this problem will be developed in this project; a bioactive bandage containing a novel combination of microspheres and a hydrog ....Bioactive Polymers for Wound Healing Applications. VitroGroR is a growth factor complex which enhances cell growth and migration, and hence has great potential for treating wounds. Tissue Therapies, which holds the rights to commercialization of VitroGroR, is seeking to develop methods of delivering VitroGroR in its active form to the wound environment. Two solutions to this problem will be developed in this project; a bioactive bandage containing a novel combination of microspheres and a hydrogel matrix, and secondly an in-situ polymerisable matrix for treatment of deep wounds. The growth factor complex will be protected from aggressive proteases through encapsulation within microspheres, and the use of MMP-inhibiting comonomers.Read moreRead less
New Biomimetic Nanostructured Coatings for Hip Implants. Over 30,000 hip implants operations take place in Australia each year, due largely to a significant and growing proportion of the population suffering from conditions such as osteoporosis. The coating on the implants, required to cause good bone ingrowth and adhesion between bone and implant, is far from perfect. We propose to spray coatings which mimic the structure of bone, and thus offer improved mechanical properties such as appropriat ....New Biomimetic Nanostructured Coatings for Hip Implants. Over 30,000 hip implants operations take place in Australia each year, due largely to a significant and growing proportion of the population suffering from conditions such as osteoporosis. The coating on the implants, required to cause good bone ingrowth and adhesion between bone and implant, is far from perfect. We propose to spray coatings which mimic the structure of bone, and thus offer improved mechanical properties such as appropriate rigidity and toughness, and stimulate better bone growth at the interface. In this way the implant should be much longer lasting and the need for undesirable revision surgery reduced. The processing technique proposed could also be a useful platform coating technology in a number of other industries.Read moreRead less
New Types of Biomimetic Nanostructured Adhesives. Adhesives are one of the main ways in which we join materials, and have many advantages over other methods of joining. In this work we will make a new class of adhesive using nanotechnology that attempts to copy the very fine-haired feet of animals such as geckos who can stick to almost any surface, under most conditions. We will make these adhesives over large surface areas, and thus they will have commercial possibilities in a range of high tec ....New Types of Biomimetic Nanostructured Adhesives. Adhesives are one of the main ways in which we join materials, and have many advantages over other methods of joining. In this work we will make a new class of adhesive using nanotechnology that attempts to copy the very fine-haired feet of animals such as geckos who can stick to almost any surface, under most conditions. We will make these adhesives over large surface areas, and thus they will have commercial possibilities in a range of high technology industries, as well as in harsh environments. Because we will be able to manipulate the structure and observe property changes, it should also give us a greater insight into the adhesion mechanisms used by many small animals and bugs.Read moreRead less