Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100121
Funder
Australian Research Council
Funding Amount
$1,000,000.00
Summary
An analytical transmission electron microscope for the investigation of functional materials, earth processes and novel condensed matter. Sustainablity depends on the delivery of clean energy, pristine water and air, and the manufacture of consumer products with small environmental footprints. Modelling long-term impacts requires an understanding of the hydro-geological cycles. The technologies are well known—efficient electronics, fuel cells, lightweight composites, and so on—but delivery is ....An analytical transmission electron microscope for the investigation of functional materials, earth processes and novel condensed matter. Sustainablity depends on the delivery of clean energy, pristine water and air, and the manufacture of consumer products with small environmental footprints. Modelling long-term impacts requires an understanding of the hydro-geological cycles. The technologies are well known—efficient electronics, fuel cells, lightweight composites, and so on—but delivery is not straightforward. It is clear, however, that novel materials manipulated at fine scales will be key. Transmission electron microscopy (TEM) guides the development of sustainable technologies. The new TEM facility at ANU will accelerate current studies, by enhancing the materials research portfolio, and extending national and international collaborations in materials, geological and earth sciences.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE170100118
Funder
Australian Research Council
Funding Amount
$1,800,000.00
Summary
UltraTEM: Resolving the structure of matter in space, energy and time. This project aims to establish a transmission electron microscope facility to analyse materials structure at the atomic level. A small number of atoms in critical locations governs the properties of materials from solar cells and catalysts to aerospace alloys, bio-sensors and quantum computers. To understand and engineer matter at this atomic level, tools are needed to characterise these critical atoms. This open access, nati ....UltraTEM: Resolving the structure of matter in space, energy and time. This project aims to establish a transmission electron microscope facility to analyse materials structure at the atomic level. A small number of atoms in critical locations governs the properties of materials from solar cells and catalysts to aerospace alloys, bio-sensors and quantum computers. To understand and engineer matter at this atomic level, tools are needed to characterise these critical atoms. This open access, national facility will be able to characterise matter at the atomic-level. Expected outcomes include better understanding of the natural world and advanced materials to solve problems in energy, technology, health, environment, communications, advanced manufacturing, transport and security.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE200100132
Funder
Australian Research Council
Funding Amount
$1,486,000.00
Summary
A triple beam microscope: new frontiers in materials nanocharacterisation. This project aims to establish a triple beam ion and electron microscope facility for the modification, preparation and characterisation of materials that have hitherto been too sensitive for high resolution analysis with charged particle beams. It is expected that materials will be studied artefact-free and at the nanoscale with twin ion beams and new detectors that allow novel imaging modes and extreme chemical sensitiv ....A triple beam microscope: new frontiers in materials nanocharacterisation. This project aims to establish a triple beam ion and electron microscope facility for the modification, preparation and characterisation of materials that have hitherto been too sensitive for high resolution analysis with charged particle beams. It is expected that materials will be studied artefact-free and at the nanoscale with twin ion beams and new detectors that allow novel imaging modes and extreme chemical sensitivity plus controlled atmosphere transfer to other instruments for correlative measurements. This unique facility should benefit research in many disciplines such as physics, chemistry, geology, pharmacy, materials, civil and chemical engineering by allowing first-ever observations of vital phenomena in diverse materials.Read moreRead less
New Polymers for Cellulose-based Bioplastics. We will design new cellulose derivatives by combining carefully engineered synthetic polymers to cellulose. We will explore the fundamental science underpinning the manufacture of these bioplastics, and apply the concept to the design of two new materials, with (super)hydrophobic and antibacterial properties. These materials have the potential to replace synthetic plastics, which comprise one of the major outputs of the chemical industry worldwide. P ....New Polymers for Cellulose-based Bioplastics. We will design new cellulose derivatives by combining carefully engineered synthetic polymers to cellulose. We will explore the fundamental science underpinning the manufacture of these bioplastics, and apply the concept to the design of two new materials, with (super)hydrophobic and antibacterial properties. These materials have the potential to replace synthetic plastics, which comprise one of the major outputs of the chemical industry worldwide. Plastic is present everywhere in human life, but its manufacture and disposal have a strong negative impact on the environment; the new materials manufactured in this project are viable alternatives to plastics, and are sustainable from a production and disposal point of view.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE200100033
Funder
Australian Research Council
Funding Amount
$1,200,000.00
Summary
In situ Environmental Electron Microscope Facility. This project aims to establish an In situ Environmental Electron Microscope Facility to characterise real-time and dynamic changes in nanomaterials at the atomic scale. We will combine a cutting-edge 'in situ' gas/heating/electrical bias holder with new camera and analysis technology on a transmission electron microscope. This facility will be a sophisticated suite of equipment that will innovate and transform microscopy in Australia to image s ....In situ Environmental Electron Microscope Facility. This project aims to establish an In situ Environmental Electron Microscope Facility to characterise real-time and dynamic changes in nanomaterials at the atomic scale. We will combine a cutting-edge 'in situ' gas/heating/electrical bias holder with new camera and analysis technology on a transmission electron microscope. This facility will be a sophisticated suite of equipment that will innovate and transform microscopy in Australia to image structural and compositional changes of materials under stimuli at a speed and resolution previously unachievable. This project will drive pioneering research in the fields of Materials Science, Chemistry and Catalysis to solve problems in advanced manufacturing, energy, technology and the environment.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE200100032
Funder
Australian Research Council
Funding Amount
$600,000.00
Summary
Advanced Multifunctional Electro-Opto-Magneto-Mechanical Analysis Platform. This project aims to build an advanced multi-functional Electro-Opto-Magneto-Mechanical analysis platform for characterizing nanomaterials and micro-/nano-scale devices. This platform expects to provide rich and unique characterization capabilities (electrical, optical, magnetic and mechanical) for hybrid devices with low temperature and high vacuum environment. The expected outcomes include multidisciplinary research co ....Advanced Multifunctional Electro-Opto-Magneto-Mechanical Analysis Platform. This project aims to build an advanced multi-functional Electro-Opto-Magneto-Mechanical analysis platform for characterizing nanomaterials and micro-/nano-scale devices. This platform expects to provide rich and unique characterization capabilities (electrical, optical, magnetic and mechanical) for hybrid devices with low temperature and high vacuum environment. The expected outcomes include multidisciplinary research collaborations and a wide range of next-generation technologies including non-invasive medical instruments, wearable devices, communication, quantum information systems and energy storage solutions. This should enable local design and construction of hybrid devices and advance the growth of local high-technology industries.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100048
Funder
Australian Research Council
Funding Amount
$340,000.00
Summary
Nanoscale optical microscopy facility. The optical microscope has enabled us to see micro-objects, leading to revolutionary discoveries in medicine and natural sciences. However, the smallest object resolved by a microscope is limited by the wavelength of light. To see nanoscale objects smaller than the wavelength, a new tool for nano-imaging is needed. This project will establish a nanoscale optical microscopy facility that will reveal the topology and true colours of the nano-objects. Such inf ....Nanoscale optical microscopy facility. The optical microscope has enabled us to see micro-objects, leading to revolutionary discoveries in medicine and natural sciences. However, the smallest object resolved by a microscope is limited by the wavelength of light. To see nanoscale objects smaller than the wavelength, a new tool for nano-imaging is needed. This project will establish a nanoscale optical microscopy facility that will reveal the topology and true colours of the nano-objects. Such information, achieved through spectroscopic analysis of the light emitted or scattered at the nanoscale, will uncover some of the most fundamental aspects of the nanoworld, leading to cutting-edge scientific discoveries and important industrial applications in photonics and solar energy.Read moreRead less