Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0239650
Funder
Australian Research Council
Funding Amount
$500,000.00
Summary
Advanced instrumentation for nano-scale imaging and analysis. It is widely accepted that the emerging fields of Nanotechnology and Nanoengineering will dominate research activity in a wide range of disciplines over the next decade. Progress in nanoscience and technology requires parallel development in nanocharacterisation and nanofabrication techniques. This proposal seeks to enhance the level of research infrastructure support for nano-scale microscopy and microanalysis at UTS and the Univer ....Advanced instrumentation for nano-scale imaging and analysis. It is widely accepted that the emerging fields of Nanotechnology and Nanoengineering will dominate research activity in a wide range of disciplines over the next decade. Progress in nanoscience and technology requires parallel development in nanocharacterisation and nanofabrication techniques. This proposal seeks to enhance the level of research infrastructure support for nano-scale microscopy and microanalysis at UTS and the University of Sydney by providing the following advanced instrumentation for nano-scale imaging, analysis and manipulation of materials:
- A Schottky field emission gun environmental scanning electron microscope
- Equipment kit for the rapid preparation of high quality transmission electron microscope specimens.Read moreRead less
Electro-mechanics of natural load-bearing materials: understanding mechanisms of toughening, remodelling, and self-healing. Nature provides some of the most advanced functional structural materials, with the capability to remodel and strengthen under changing loads. The origins of the functional properties which allow them to do this will be explored, providing the possibility of developing materials which mimic this behaviour.
In-situ biofunctionalisation for additive manufacturing. Additive manufacturing that incorporates printing of live cells can create hierarchical, multi-component structures that mimic biology. However, an ability to include spatially segregated biological cues is currently lacking. This project will develop plasma pen modules to selectively functionalise surfaces and interfaces, as they are being printed, with robustly immobilised hydrogels and biological signalling molecules to direct cell beha ....In-situ biofunctionalisation for additive manufacturing. Additive manufacturing that incorporates printing of live cells can create hierarchical, multi-component structures that mimic biology. However, an ability to include spatially segregated biological cues is currently lacking. This project will develop plasma pen modules to selectively functionalise surfaces and interfaces, as they are being printed, with robustly immobilised hydrogels and biological signalling molecules to direct cell behaviour. The expected outcome is a green technology enabling the fabrication of structures that replicate the native environments of cells in the body to provide optimal efficacy in drug discovery and regenerative medicine, and significant benefits for the Australian biomedical sector.Read moreRead less
A new dimension of functionality for high surface-area-to volume materials. This project aims to develop processes that can successfully functionalise the inner surfaces of high surface area to volume structures with interconnected porosity. These structures underpin many processes in modern manufacturing. Examples include columns and fluidised beds for purification, materials for energy storage and conversion, biomedical scaffolds and structures for high sensitivity sensing. The efficacy of the ....A new dimension of functionality for high surface-area-to volume materials. This project aims to develop processes that can successfully functionalise the inner surfaces of high surface area to volume structures with interconnected porosity. These structures underpin many processes in modern manufacturing. Examples include columns and fluidised beds for purification, materials for energy storage and conversion, biomedical scaffolds and structures for high sensitivity sensing. The efficacy of these materials is strongly affected by the condition of the surfaces, but modifying the surfaces of internal pores deep within such structures presents major challenges. This project will provide environmental friendly, dry plasma processes to tailor surface functionality, improving the efficacy of existing processes and opening up new far reaching applications for such materials.Read moreRead less
Ultrafine grained titanium for bio-implant applications. The project underpins the potential niche applications of ultrafine grained titanium for biomedical implants and establishes a knowledge base for expanding Australia's capacity for manufacturing titanium parts. The novel technology will lead to a broader usage of titanium by biomedical industry and promote the development of the titanium manufacturing industry in Australia. The development of ultrafine grained titanium specifically designe ....Ultrafine grained titanium for bio-implant applications. The project underpins the potential niche applications of ultrafine grained titanium for biomedical implants and establishes a knowledge base for expanding Australia's capacity for manufacturing titanium parts. The novel technology will lead to a broader usage of titanium by biomedical industry and promote the development of the titanium manufacturing industry in Australia. The development of ultrafine grained titanium specifically designed for bio-implants will increase Australia's competitiveness in the global market. The project targets at least three of the priority goals specified under National Research Priority breakthrough science, frontier technologies and advanced materials.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE150100001
Funder
Australian Research Council
Funding Amount
$410,000.00
Summary
Collaborative advanced spectroscopy facility for materials and devices. Collaborative advanced spectroscopy facility for materials and devices: This project aims to enable advancements in electronics, photonics, biomedicine, and sensing through a collaborative, open access facility for advanced optical and chemical spectroscopy of thin films, materials, and devices. The intended capabilities include high-speed, precise and state-of-the-art spectroscopy tools which enable in situ characterisation ....Collaborative advanced spectroscopy facility for materials and devices. Collaborative advanced spectroscopy facility for materials and devices: This project aims to enable advancements in electronics, photonics, biomedicine, and sensing through a collaborative, open access facility for advanced optical and chemical spectroscopy of thin films, materials, and devices. The intended capabilities include high-speed, precise and state-of-the-art spectroscopy tools which enable in situ characterisation at sub-micron scales and cryogenic temperatures, under bio-simulated environments, down to single pixel resolution, with parallel imaging and spectroscopy, and of fluids and biomaterials. The instrumentation will include cryogenic sub-micron photoluminescence and micro-Raman spectroscopy, single pixel optical and dark field spectroscopy, continuous wave terahertz time-domain spectroscopy, wide wavelength microscopic spectroscopy, and temperature-jump kinetics spectroscopy. It is expected that these complementary instruments will accelerate research in materials and devices for plasmonics, nanoelectronics, biomedicine, biochemistry, security, and forensic science.Read moreRead less
Some Outstanding Mechanics Problems in Layered Ferroelectromagnetic Composites with Enhanced Magnetoelectric Effect. The proposed research has high impact on both science and technology of ferroelectromagnetic materials. The outcomes will expand Australia's knowledge base and research capability in this emerging field. Relevant industries, such as smart materials and devices, can benefit from the results of this project. The theoretical, experimental and numerical results can be directly transfo ....Some Outstanding Mechanics Problems in Layered Ferroelectromagnetic Composites with Enhanced Magnetoelectric Effect. The proposed research has high impact on both science and technology of ferroelectromagnetic materials. The outcomes will expand Australia's knowledge base and research capability in this emerging field. Relevant industries, such as smart materials and devices, can benefit from the results of this project. The theoretical, experimental and numerical results can be directly transformed to design and application guidelines for the materials engineers and scientists to develop innovative and structurally/functionally reliable ferroelectromagnetic composites and their various devices and products.Read moreRead less
Application of First-principles Theory in Condensed Matter Physics, Surface Physics, Chemistry, and Engineering: Coatings, Catalysis, and Devices. The project addresses areas of high technological interest, namely the development of nitride-based materials for hard-coatings, spintronic (control and use of electron spin) and optoelectronic (in the blue/UV energy range) devices - as well as the area of heterogeneous oxidation catalysis. Using state-of-the-art methods it will lead to the developme ....Application of First-principles Theory in Condensed Matter Physics, Surface Physics, Chemistry, and Engineering: Coatings, Catalysis, and Devices. The project addresses areas of high technological interest, namely the development of nitride-based materials for hard-coatings, spintronic (control and use of electron spin) and optoelectronic (in the blue/UV energy range) devices - as well as the area of heterogeneous oxidation catalysis. Using state-of-the-art methods it will lead to the development of new materials and devices of relevance to industry.Read moreRead less
Investigation of a series of metallic sustrate materials suitable for developing long Y-Ba-Cu-O superconductors. Aims: Researchers from Institute for Superconducting and Electronic Materials, the University of Wollongong (UoW) & the Dept. Mat. Sci & Eng., University of Cincinnati (UC) in USA will build strong collaborations through joint research on a series of metallic substrate materials. Significance: The research work will contribute to the development of the second generation of high temper ....Investigation of a series of metallic sustrate materials suitable for developing long Y-Ba-Cu-O superconductors. Aims: Researchers from Institute for Superconducting and Electronic Materials, the University of Wollongong (UoW) & the Dept. Mat. Sci & Eng., University of Cincinnati (UC) in USA will build strong collaborations through joint research on a series of metallic substrate materials. Significance: The research work will contribute to the development of the second generation of high temperature superconducting wire technology. Expected outcomes: strengthen international research experience for junior researchers and develop new collaborations between senior researchers from UoW in Australia and UC in USA.Read moreRead less
Manipulation of Spin by Electric Field. Spin manipulation is one of the most challenging topics in the new emerging spintronics technology. This project will develop a novel solution for the problem of spin manipulation and falls into the National Research Priority: Frontier Technologies for Building and Transforming Australian Industries. This project will provide training for postgraduate students and develop patentable science and technologies. The successful accomplishment of this project wi ....Manipulation of Spin by Electric Field. Spin manipulation is one of the most challenging topics in the new emerging spintronics technology. This project will develop a novel solution for the problem of spin manipulation and falls into the National Research Priority: Frontier Technologies for Building and Transforming Australian Industries. This project will provide training for postgraduate students and develop patentable science and technologies. The successful accomplishment of this project will consolidate the knowledge and technology background that is needed for Australia to develop the next generation of spin-base electronics. In the long term, spin-based electronics with high efficiency and very low energy consumption will benefit the Australian manufacturing industry.Read moreRead less