New Materials for Energy Capture and Conversion: Ionic Liquid-derived Conducting Polymers. Inherently conducting polymers (ICPs) have applications in a wide range of electrochemical devices including actuators, for artificial muscles, and photovoltaic cells for harnessing solar energy. Use of an ionic liquid as the electrolyte within these devices greatly increases the stability and cyclability of the ICP. Our preliminary work shows that an ionic liquid solvent in the synthesis of ICPs results i ....New Materials for Energy Capture and Conversion: Ionic Liquid-derived Conducting Polymers. Inherently conducting polymers (ICPs) have applications in a wide range of electrochemical devices including actuators, for artificial muscles, and photovoltaic cells for harnessing solar energy. Use of an ionic liquid as the electrolyte within these devices greatly increases the stability and cyclability of the ICP. Our preliminary work shows that an ionic liquid solvent in the synthesis of ICPs results in materials with dramatically different morphologies and improved electronic properties. Ionic liquids will be used to prepare ICPs with enhanced electrical and mechanical properties and prototype photovoltaic and actuator devices will be developed based on these new materials.Read moreRead less
Enhanced pigment weathering resistance by coating with high dielectric ceramic. The partner company, Tiwest, based in Western Australia, is a major contributor to the economy, and earns more than $A400m annually in exports. It is the only company in the world that mines, separates, refines and manufactures titania products, including pigments, in one region. The current post-titania particle formation wet-coating process, however, presents a major capital and recurrent cost and necessitates a pi ....Enhanced pigment weathering resistance by coating with high dielectric ceramic. The partner company, Tiwest, based in Western Australia, is a major contributor to the economy, and earns more than $A400m annually in exports. It is the only company in the world that mines, separates, refines and manufactures titania products, including pigments, in one region. The current post-titania particle formation wet-coating process, however, presents a major capital and recurrent cost and necessitates a pigment regrind stage. The research will investigate the development of a highly durable dry-coated pigment utilising a novel high dielectric coating. This development has the potential to ensure the partner company's future competitiveness through reduced processing costs and improved product performance.Read moreRead less
Fundamental studies of the mechanism of atmospheric pressure plasma deposition of thin films. This project will extend fundamental understanding of the mechanisms occurring in a revolutionary plasma deposition process, atmospheric pressure plasma deposition, building upon a platform of technology developed over the last 12 months. The deposition process uses liquid containing the deposition source materials to confine the plasma. The enormous commercial potential of the process for wear-resist ....Fundamental studies of the mechanism of atmospheric pressure plasma deposition of thin films. This project will extend fundamental understanding of the mechanisms occurring in a revolutionary plasma deposition process, atmospheric pressure plasma deposition, building upon a platform of technology developed over the last 12 months. The deposition process uses liquid containing the deposition source materials to confine the plasma. The enormous commercial potential of the process for wear-resistant coatings, biomaterials and electronics is currently limited by insufficient understanding of the basic mechanisms of deposition, and critical plasma parameters which control the process. This basic science project focusses on fundamental chemical and plasma processes, and will develop initial models, enabling generalisation of the process.Read moreRead less
Enhanced sensitivity of electrospray ionization mass spectrometry. Enhanced sensitivity of electrospray ionization mass spectrometry. This project aims to enhance the sensitivity of nano-electrospray ionization mass spectrometry (nanoESI-MS) by an order of magnitude by simultaneously overcoming the two interdependent limitations in ion generation and transmission efficiency. This project will design glass capillaries and tubes with complex structures to enable both multiplexing ion generation fr ....Enhanced sensitivity of electrospray ionization mass spectrometry. Enhanced sensitivity of electrospray ionization mass spectrometry. This project aims to enhance the sensitivity of nano-electrospray ionization mass spectrometry (nanoESI-MS) by an order of magnitude by simultaneously overcoming the two interdependent limitations in ion generation and transmission efficiency. This project will design glass capillaries and tubes with complex structures to enable both multiplexing ion generation from a single capillary and geometrically matching the bore of the tube collecting the emitted ion plume. NanoESI-MS has become an indispensable analytical tool for proteomics and synthetic chemistry. The significant enhancement of nanoESI-MS sensitivity in this project is expected to accelerate progress in disease research, biomarker discovery and drug development.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE160100063
Funder
Australian Research Council
Funding Amount
$980,000.00
Summary
Focused ion beam microscope for trace element analysis and nanomachining. Focused ion beam microscope for trace element analysis and nanomachining:
This project aims to fill the critical gap in 3-D imaging and compositional characterisation of metals, functional materials, polymers, biomaterials, ceramics and minerals at micro- and nano-scales. Coupling of dual column focused ion beam microscopy with secondary ion mass spectroscopy analysis will is designed to overcome the long-standing limitat ....Focused ion beam microscope for trace element analysis and nanomachining. Focused ion beam microscope for trace element analysis and nanomachining:
This project aims to fill the critical gap in 3-D imaging and compositional characterisation of metals, functional materials, polymers, biomaterials, ceramics and minerals at micro- and nano-scales. Coupling of dual column focused ion beam microscopy with secondary ion mass spectroscopy analysis will is designed to overcome the long-standing limitation of light and trace element analysis in scanning electron microscopes. This facility would provide Australian researchers with a new capability of characterising light and trace elements using scanning electron microscopy. Along with the ability to characterise a diverse range of materials in 3-D, the new system would enable fabrication of functional nanoscale devices for nanotechnology, biomedical and energy applications. Read moreRead less
Controlling Anisotropic Growth of Metal Oxide Crystals in Aqueous Solution by Selective Adsorption of Small Molecules. The proposed research will enhance our ability to make both light emitting diodes (LEDs) and piezoelectric actuators from ZnO. LEDs are a high efficiency light source that save energy compared to conventional illumination sources and can be fabricated in thin films. The proposal is to also bring the technology for device fabrication to Australia where it can ultimately be used ....Controlling Anisotropic Growth of Metal Oxide Crystals in Aqueous Solution by Selective Adsorption of Small Molecules. The proposed research will enhance our ability to make both light emitting diodes (LEDs) and piezoelectric actuators from ZnO. LEDs are a high efficiency light source that save energy compared to conventional illumination sources and can be fabricated in thin films. The proposal is to also bring the technology for device fabrication to Australia where it can ultimately be used to broaden the economic base of the country. The knowledge of crystal growth rate and crystal morphology control can be applied to improvements in the efficiency of alumina production which is already an important contributor to Australian exports.Read moreRead less
Hydrogen storage materials for energy conversion applications. For a clean environment, the ideal synthetic fuel is hydrogen because it is lightweight, highly abundant and its oxidation product (water) is environmentally benign. However, the effective storage of hydrogen remains a scientific challenge. This project aims to develop innovative materials with high hydrogen storage capacity and long cycle life, including new composite hydrides, catalysed metal hydrides and various nanotubes. The exp ....Hydrogen storage materials for energy conversion applications. For a clean environment, the ideal synthetic fuel is hydrogen because it is lightweight, highly abundant and its oxidation product (water) is environmentally benign. However, the effective storage of hydrogen remains a scientific challenge. This project aims to develop innovative materials with high hydrogen storage capacity and long cycle life, including new composite hydrides, catalysed metal hydrides and various nanotubes. The expected outcome is the achievement of high reversible hydrogen storage capacity to meet all the demands required for energy conversion applications, in particular, for hydrogen storage/fuel-cell vehicular applications.Read moreRead less
Wet Particulate Materials - Flow or Fracture? Most advanced materials are produced from starting materials in the form of fine particles. Powders, especially in ceramic engineering, are first processed wet into near-final shape. Improved understanding of the fracture of particle networks is critical in order to process nano-sized advanced ceramic materials for use in solar energy harvesting and extreme heat engine applications as well as minimising drying cracks in paints and coatings. The resea ....Wet Particulate Materials - Flow or Fracture? Most advanced materials are produced from starting materials in the form of fine particles. Powders, especially in ceramic engineering, are first processed wet into near-final shape. Improved understanding of the fracture of particle networks is critical in order to process nano-sized advanced ceramic materials for use in solar energy harvesting and extreme heat engine applications as well as minimising drying cracks in paints and coatings. The research aims to identify the fundamental link between particle network strength and structure and the fracture of wet powder bodies. The microscopic mechanisms that control the behaviour will be investigated with a particular focus on toughening mechanisms including the influence of plasticity.Read moreRead less
New Nanoscale Up-converting Photoluminescent Materials for Passive Safety Visual Systems. The demand for safety and security products is growing as the importance of providing an environment safer from natural, accidental or man-made threats increases in the community. Life safety applications in buildings and work environments as well as trains and planes for example are dependent upon the ability for non-powered passive systems to give efficient visual guidance in dangerous dark and smoke fill ....New Nanoscale Up-converting Photoluminescent Materials for Passive Safety Visual Systems. The demand for safety and security products is growing as the importance of providing an environment safer from natural, accidental or man-made threats increases in the community. Life safety applications in buildings and work environments as well as trains and planes for example are dependent upon the ability for non-powered passive systems to give efficient visual guidance in dangerous dark and smoke filled environments. This project will provide a practical demonstration of the successful implementation of nanotechnology to smaller Australian companies where it will overcome significant drawbacks in current manufacturing and yield new products which are activated in darkness by infrared radiation.Read moreRead less