New Materials for Energy Capture and Conversion: Ionic Liquid-derived Conducting Polymers. Inherently conducting polymers (ICPs) have applications in a wide range of electrochemical devices including actuators, for artificial muscles, and photovoltaic cells for harnessing solar energy. Use of an ionic liquid as the electrolyte within these devices greatly increases the stability and cyclability of the ICP. Our preliminary work shows that an ionic liquid solvent in the synthesis of ICPs results i ....New Materials for Energy Capture and Conversion: Ionic Liquid-derived Conducting Polymers. Inherently conducting polymers (ICPs) have applications in a wide range of electrochemical devices including actuators, for artificial muscles, and photovoltaic cells for harnessing solar energy. Use of an ionic liquid as the electrolyte within these devices greatly increases the stability and cyclability of the ICP. Our preliminary work shows that an ionic liquid solvent in the synthesis of ICPs results in materials with dramatically different morphologies and improved electronic properties. Ionic liquids will be used to prepare ICPs with enhanced electrical and mechanical properties and prototype photovoltaic and actuator devices will be developed based on these new materials.Read moreRead less
Enhanced sensitivity of electrospray ionization mass spectrometry. Enhanced sensitivity of electrospray ionization mass spectrometry. This project aims to enhance the sensitivity of nano-electrospray ionization mass spectrometry (nanoESI-MS) by an order of magnitude by simultaneously overcoming the two interdependent limitations in ion generation and transmission efficiency. This project will design glass capillaries and tubes with complex structures to enable both multiplexing ion generation fr ....Enhanced sensitivity of electrospray ionization mass spectrometry. Enhanced sensitivity of electrospray ionization mass spectrometry. This project aims to enhance the sensitivity of nano-electrospray ionization mass spectrometry (nanoESI-MS) by an order of magnitude by simultaneously overcoming the two interdependent limitations in ion generation and transmission efficiency. This project will design glass capillaries and tubes with complex structures to enable both multiplexing ion generation from a single capillary and geometrically matching the bore of the tube collecting the emitted ion plume. NanoESI-MS has become an indispensable analytical tool for proteomics and synthetic chemistry. The significant enhancement of nanoESI-MS sensitivity in this project is expected to accelerate progress in disease research, biomarker discovery and drug development.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE160100063
Funder
Australian Research Council
Funding Amount
$980,000.00
Summary
Focused ion beam microscope for trace element analysis and nanomachining. Focused ion beam microscope for trace element analysis and nanomachining:
This project aims to fill the critical gap in 3-D imaging and compositional characterisation of metals, functional materials, polymers, biomaterials, ceramics and minerals at micro- and nano-scales. Coupling of dual column focused ion beam microscopy with secondary ion mass spectroscopy analysis will is designed to overcome the long-standing limitat ....Focused ion beam microscope for trace element analysis and nanomachining. Focused ion beam microscope for trace element analysis and nanomachining:
This project aims to fill the critical gap in 3-D imaging and compositional characterisation of metals, functional materials, polymers, biomaterials, ceramics and minerals at micro- and nano-scales. Coupling of dual column focused ion beam microscopy with secondary ion mass spectroscopy analysis will is designed to overcome the long-standing limitation of light and trace element analysis in scanning electron microscopes. This facility would provide Australian researchers with a new capability of characterising light and trace elements using scanning electron microscopy. Along with the ability to characterise a diverse range of materials in 3-D, the new system would enable fabrication of functional nanoscale devices for nanotechnology, biomedical and energy applications. Read moreRead less
Controlling Anisotropic Growth of Metal Oxide Crystals in Aqueous Solution by Selective Adsorption of Small Molecules. The proposed research will enhance our ability to make both light emitting diodes (LEDs) and piezoelectric actuators from ZnO. LEDs are a high efficiency light source that save energy compared to conventional illumination sources and can be fabricated in thin films. The proposal is to also bring the technology for device fabrication to Australia where it can ultimately be used ....Controlling Anisotropic Growth of Metal Oxide Crystals in Aqueous Solution by Selective Adsorption of Small Molecules. The proposed research will enhance our ability to make both light emitting diodes (LEDs) and piezoelectric actuators from ZnO. LEDs are a high efficiency light source that save energy compared to conventional illumination sources and can be fabricated in thin films. The proposal is to also bring the technology for device fabrication to Australia where it can ultimately be used to broaden the economic base of the country. The knowledge of crystal growth rate and crystal morphology control can be applied to improvements in the efficiency of alumina production which is already an important contributor to Australian exports.Read moreRead less
Wet Particulate Materials - Flow or Fracture? Most advanced materials are produced from starting materials in the form of fine particles. Powders, especially in ceramic engineering, are first processed wet into near-final shape. Improved understanding of the fracture of particle networks is critical in order to process nano-sized advanced ceramic materials for use in solar energy harvesting and extreme heat engine applications as well as minimising drying cracks in paints and coatings. The resea ....Wet Particulate Materials - Flow or Fracture? Most advanced materials are produced from starting materials in the form of fine particles. Powders, especially in ceramic engineering, are first processed wet into near-final shape. Improved understanding of the fracture of particle networks is critical in order to process nano-sized advanced ceramic materials for use in solar energy harvesting and extreme heat engine applications as well as minimising drying cracks in paints and coatings. The research aims to identify the fundamental link between particle network strength and structure and the fracture of wet powder bodies. The microscopic mechanisms that control the behaviour will be investigated with a particular focus on toughening mechanisms including the influence of plasticity.Read moreRead less
New Nanoscale Up-converting Photoluminescent Materials for Passive Safety Visual Systems. The demand for safety and security products is growing as the importance of providing an environment safer from natural, accidental or man-made threats increases in the community. Life safety applications in buildings and work environments as well as trains and planes for example are dependent upon the ability for non-powered passive systems to give efficient visual guidance in dangerous dark and smoke fill ....New Nanoscale Up-converting Photoluminescent Materials for Passive Safety Visual Systems. The demand for safety and security products is growing as the importance of providing an environment safer from natural, accidental or man-made threats increases in the community. Life safety applications in buildings and work environments as well as trains and planes for example are dependent upon the ability for non-powered passive systems to give efficient visual guidance in dangerous dark and smoke filled environments. This project will provide a practical demonstration of the successful implementation of nanotechnology to smaller Australian companies where it will overcome significant drawbacks in current manufacturing and yield new products which are activated in darkness by infrared radiation.Read moreRead less
A new paradigm in near-net-shape advanced ceramic component processing. The raw materials for high performance ceramics (such as alumina and zirconia) are readily available and produced in Australia. Nearly all of these raw materials are exported. The development of processing to make high value added ceramic components from these raw materials will result in greater profit and more jobs for Australians. The proposed research is to develop a novel innovative process to drive a value adding ce ....A new paradigm in near-net-shape advanced ceramic component processing. The raw materials for high performance ceramics (such as alumina and zirconia) are readily available and produced in Australia. Nearly all of these raw materials are exported. The development of processing to make high value added ceramic components from these raw materials will result in greater profit and more jobs for Australians. The proposed research is to develop a novel innovative process to drive a value adding ceramic processing industry in Australia.Read moreRead less
Synthesis of functionalised metal oxide beads with hierarchical pores for radionuclide and metal sequestration. The central aim of this project is to fabricate nanostructured materials to address the worldwide issue of nuclear waste. These novel materials, with tailored porosity and surface functionality, will decrease both radioactive waste volume and the potential for environmental risk. The collaboration between the Caruso group at the University of Melbourne and the Luca group at ANSTO will ....Synthesis of functionalised metal oxide beads with hierarchical pores for radionuclide and metal sequestration. The central aim of this project is to fabricate nanostructured materials to address the worldwide issue of nuclear waste. These novel materials, with tailored porosity and surface functionality, will decrease both radioactive waste volume and the potential for environmental risk. The collaboration between the Caruso group at the University of Melbourne and the Luca group at ANSTO will educate more scientists and students in the areas of nuclear science and engineering, and the environmental impact of nuclear power generators. Such expertise is currently in high demand around the world, thereby enhancing Australia's position in the global nuclear field.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE170100235
Funder
Australian Research Council
Funding Amount
$388,000.00
Summary
Spectroscopy and imaging platform for photoactive materials. This project aims to establish a comprehensive analytic tool-box to characterise solution-processable materials for thin-film solar cells based on materials such as perovskites. These materials have light harvesting properties with absorption edges beyond 800 nm. This project will focus on time-resolved transient absorption and microwave conductivity phenomena and on lock-in thermographic imaging capabilities. This will accelerate mate ....Spectroscopy and imaging platform for photoactive materials. This project aims to establish a comprehensive analytic tool-box to characterise solution-processable materials for thin-film solar cells based on materials such as perovskites. These materials have light harvesting properties with absorption edges beyond 800 nm. This project will focus on time-resolved transient absorption and microwave conductivity phenomena and on lock-in thermographic imaging capabilities. This will accelerate materials and technological development in this research field. This project is expected to help the local and global energy sector transition to sustainable energy, provide a competitive edge for commercialisations of solar technologies in Australia, and benefit the economy, environment and national security.Read moreRead less
Advanced Ionic Materials for Organic Photovoltaics. Australia will greatly benefit from the development of improved solar energy technology, as a means of addressing the issue of climate change as a result of continued fossil fuel use. Solar power is also advantageous as it also allows electricity to be generated locally where it is needed, which is particularly important for the many remote areas of Australia. The climate in Australia is ideally suited for the electricity production through pho ....Advanced Ionic Materials for Organic Photovoltaics. Australia will greatly benefit from the development of improved solar energy technology, as a means of addressing the issue of climate change as a result of continued fossil fuel use. Solar power is also advantageous as it also allows electricity to be generated locally where it is needed, which is particularly important for the many remote areas of Australia. The climate in Australia is ideally suited for the electricity production through photovoltaics, and this project will focus on improving the performance of these devices to enable their widespread use. Read moreRead less