Fluid-thermal-structural interactions on high-speed aerospace vehicles. Sixteen years after the retirement of Concorde, high-speed commercial flight is once again on the rise with the development of new supersonic business jets and small airliners as well as hypersonic transport and reusable space launch systems. Robust and efficient designs for these light-weight vehicles must address the problem of aerodynamic heating and its effect on structural performance and lifing. This project will desig ....Fluid-thermal-structural interactions on high-speed aerospace vehicles. Sixteen years after the retirement of Concorde, high-speed commercial flight is once again on the rise with the development of new supersonic business jets and small airliners as well as hypersonic transport and reusable space launch systems. Robust and efficient designs for these light-weight vehicles must address the problem of aerodynamic heating and its effect on structural performance and lifing. This project will design and perform first-of-kind experiments that reproduce the complex fluid-thermal-structural interactions representative of those experienced by these aircraft and rockets. We will then use these measurements to assess, validate and improve the current state-of-the-art of simulation and modelling approaches for design.Read moreRead less
Electron Transpiration Cooling of Hypersonic Vehicles. Future aircraft for flight at hypersonic speeds require sharp leading edges for the best aerodynamic performance. Sharp leading edges incur high heat loads and cannot be adequately cooled with current technologies. The project aim is to investigate novel surface materials that emit electrons when heated. This emission of electrons from the surface can significantly contribute to the cooling of the sharp leading edges. This project is expecte ....Electron Transpiration Cooling of Hypersonic Vehicles. Future aircraft for flight at hypersonic speeds require sharp leading edges for the best aerodynamic performance. Sharp leading edges incur high heat loads and cannot be adequately cooled with current technologies. The project aim is to investigate novel surface materials that emit electrons when heated. This emission of electrons from the surface can significantly contribute to the cooling of the sharp leading edges. This project is expected to deliver new experimental data on novel surface materials exposed to a hypersonic flow environment and computer models that can simulate their cooling effect. This investigation will contribute towards enabling technologies for sustained hypersonic flight by overcoming critical head load limitations.Read moreRead less
AM of MAX Phase parts for applications in extreme environments. This project aims to develop techniques to synthesize MAX Phase compound materials in-situ using laser additive manufacturing. The project expects to increase jet engine fuel efficiency and thrust, and to fabricate longer-lasting parts for supersonic speed applications. The expected outcomes include well-developed additive manufacturing processes to make high performance engineering components with shape complexity for extreme envir ....AM of MAX Phase parts for applications in extreme environments. This project aims to develop techniques to synthesize MAX Phase compound materials in-situ using laser additive manufacturing. The project expects to increase jet engine fuel efficiency and thrust, and to fabricate longer-lasting parts for supersonic speed applications. The expected outcomes include well-developed additive manufacturing processes to make high performance engineering components with shape complexity for extreme environment applications, and new methods to increase the 3D printability of brittle materials. This should provide significant benefits to aerospace and defense industries through solving their long standing bottleneck material and processing problems. The outcomes also enhance Australia’s manufacturing capacity.Read moreRead less
Dispersion of spacecraft components during re-entry. Destructive re-entry trajectories for used satellites are designed so debris remaining after re-entry falls harmlessly to the Earth. However, the dramatic increase in the mass of orbiting objects has outpaced improvements in predicting hazardous impact zones. This project aims to develop the experimental and theoretical methods needed to study separation of objects in hypersonic flow in order to better predict the dispersion of debris from re- ....Dispersion of spacecraft components during re-entry. Destructive re-entry trajectories for used satellites are designed so debris remaining after re-entry falls harmlessly to the Earth. However, the dramatic increase in the mass of orbiting objects has outpaced improvements in predicting hazardous impact zones. This project aims to develop the experimental and theoretical methods needed to study separation of objects in hypersonic flow in order to better predict the dispersion of debris from re-entering space objects. New hypersonic wind tunnel experiments, modelling, and computational simulations will be performed to enhance our understanding and improve predictions of how spacecraft components are dispersed during re-entry.Read moreRead less
Fluid-structural interactions in high-speed flows. This project aims to perform experiments to measure fluid-structure interaction in hypersonic flows. The work will improve the accuracy of simulation tools that are urgently required to aid industry in the design of more structurally efficient and robust high-speed vehicles. These tools will in turn be used to reveal the underlying physics of the fluid-structure interactions and establish the relative significance of the driving parameters. Accu ....Fluid-structural interactions in high-speed flows. This project aims to perform experiments to measure fluid-structure interaction in hypersonic flows. The work will improve the accuracy of simulation tools that are urgently required to aid industry in the design of more structurally efficient and robust high-speed vehicles. These tools will in turn be used to reveal the underlying physics of the fluid-structure interactions and establish the relative significance of the driving parameters. Accurate prediction of the behaviour and lifetime of structural components subject to these fluid-structural interactions, in which the deformation of the structure induced by the local flow field, can in turn influence this flow field. This coupling can result in damage or even catastrophic structural failure and thus robust design tools must be developed to avoid this.Read moreRead less
Radiation and Ablation in Rapidly Expanding Flows. The aim of the project is to record the spectra of radiation from a region of rapidly expanding flow representative of the passage of the shock layer on a re-entry capsule from the windward to the leeward surfaces. The significance of this work is that it addresses a critical area of spacecraft where the uncertainties of our design techniques are of the order of 300 per cent in terms of surface heat transfer, and current vehicles have to use lar ....Radiation and Ablation in Rapidly Expanding Flows. The aim of the project is to record the spectra of radiation from a region of rapidly expanding flow representative of the passage of the shock layer on a re-entry capsule from the windward to the leeward surfaces. The significance of this work is that it addresses a critical area of spacecraft where the uncertainties of our design techniques are of the order of 300 per cent in terms of surface heat transfer, and current vehicles have to use large safety factors to ensure survivability. The outputs from the project will be a data base of radiative parameters which should enable accurate models of the flow to be developed, which is expected to facilitate the design of advanced spacecraft with greater safety and reliability, and with lower structural mass.Read moreRead less
Voices of Regional Australia: The linguistic patterning of local attachment. This project aims to investigate language and social dynamics among regional Australians, who, despite representing one third of the population, have been often neglected in the research to date. The project expects to generate new knowledge around regional attachment and the impact that has on speech patterns, adapting for the first time recently developed international metrics to the Australian context. Expected outco ....Voices of Regional Australia: The linguistic patterning of local attachment. This project aims to investigate language and social dynamics among regional Australians, who, despite representing one third of the population, have been often neglected in the research to date. The project expects to generate new knowledge around regional attachment and the impact that has on speech patterns, adapting for the first time recently developed international metrics to the Australian context. Expected outcomes include a better understanding of models of language change across urban and rural areas, and a novel dataset recording the stories of regional Australians, and in particular, their experiences facing bushfire. This should provide significant benefits as a record of life, language and community in regional Australia.Read moreRead less
Image-based teleoperation of semi-autonomous robotic vehicles. This project will contribute strongly to Australia's robotic service industry in the development of semi-autonomous robotic inspection vehicles by; developing core technology in image-based teleoperation, training experts in the area, promoting the study of this topic within the Australian academia, and developing test facilities and prototype vehicles. Robotic inspection vehicles have the potential to replace direct human presence i ....Image-based teleoperation of semi-autonomous robotic vehicles. This project will contribute strongly to Australia's robotic service industry in the development of semi-autonomous robotic inspection vehicles by; developing core technology in image-based teleoperation, training experts in the area, promoting the study of this topic within the Australian academia, and developing test facilities and prototype vehicles. Robotic inspection vehicles have the potential to replace direct human presence in difficult, dangerous or simply uncomfortable inspection tasks such as; inspection of industrial pressure vessels, piping and conduits in factories or mines, undersea cabling, inspection of bridges, dams and other large scale civil buildings, amongst many other possibilities.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE160100194
Funder
Australian Research Council
Funding Amount
$250,000.00
Summary
Optical diagnostics for the investigation of high-speed energetic processes. Optical diagnostics for the investigation of high-speed energetic processes:
The project seeks to establish equipment to enable the investigation of high-speed energetic processes. Such processes, where large amounts of energy are released over a short time frame, occur in nature and almost every field of science and engineering, and their investigation is a formidable challenge. This challenge is designed to be met th ....Optical diagnostics for the investigation of high-speed energetic processes. Optical diagnostics for the investigation of high-speed energetic processes:
The project seeks to establish equipment to enable the investigation of high-speed energetic processes. Such processes, where large amounts of energy are released over a short time frame, occur in nature and almost every field of science and engineering, and their investigation is a formidable challenge. This challenge is designed to be met through the combined use of state-of-the-art flow visualisation, thermography and spectrometry equipment. These diagnostics would open avenues into so far impossible or difficult to conduct research on highly transient phenomena in various research fields, which include various aspects of fluid mechanics, combustion, and fracture mechanics. The equipment would be instrumental in the design of better and innovative machines, materials, instruments and processes.Read moreRead less
Wind Tunnel Testing of a Hypersonic Plasma Engine. This project intends to evaluate an electric engine that is capable of speeds in excess of 10000 km/hr, for access to space and responsive surveillance in our region. The expertise of Lockheed Martin, Lockheed Martin Australia, the University of Qld and DST Group are to be combined to complete experimental and theoretical evaluations of an air-breathing plasma engine that is capable of out-performing rockets and scramjets. US Air Force Research ....Wind Tunnel Testing of a Hypersonic Plasma Engine. This project intends to evaluate an electric engine that is capable of speeds in excess of 10000 km/hr, for access to space and responsive surveillance in our region. The expertise of Lockheed Martin, Lockheed Martin Australia, the University of Qld and DST Group are to be combined to complete experimental and theoretical evaluations of an air-breathing plasma engine that is capable of out-performing rockets and scramjets. US Air Force Research Laboratory results will also be compared and shared. This project provides opportunities for young Australian researchers to be participate and lead an exciting new field of propulsion. It is anticipated that the program will be the foundations to future flight demonstrations from Woomera, Australia.Read moreRead less