The Australian Research Data Commons (ARDC) invites you to participate in a short survey about your
interaction with the ARDC and use of our national research infrastructure and services. The survey will take
approximately 5 minutes and is anonymous. It’s open to anyone who uses our digital research infrastructure
services including Reasearch Link Australia.
We will use the information you provide to improve the national research infrastructure and services we
deliver and to report on user satisfaction to the Australian Government’s National Collaborative Research
Infrastructure Strategy (NCRIS) program.
Please take a few minutes to provide your input. The survey closes COB Friday 29 May 2026.
Complete the 5 min survey now by clicking on the link below.
Multipurpose separation platforms for protein purification. Over the next decades, many new therapies and products will be needed to enhance the quality of human life. Biopharmaceuticals and other protein-based products will thus be increasingly in demand. This will require significant improvements in biotechnological procedures, particularly sophisticated purification technologies. Through the development of a novel technology, this project is anticipated to significantly contribute to these so ....Multipurpose separation platforms for protein purification. Over the next decades, many new therapies and products will be needed to enhance the quality of human life. Biopharmaceuticals and other protein-based products will thus be increasingly in demand. This will require significant improvements in biotechnological procedures, particularly sophisticated purification technologies. Through the development of a novel technology, this project is anticipated to significantly contribute to these societal needs and provide a new way to purify these important molecules. National and community benefits will accrue from this scientific innovation and from its application, which is expected to provide more efficient manufacturing opportunities for key biotechnology industries.Read moreRead less
Processing Pearl Nacre for Bio-Nanotechnology. Nanotechnology has exciting potential to solve major health challenges of the 21st century. The proposed research focuses on developing health care products, derived from a renewable waste stream resource from the pearling industry, en route to establishing products to benefit the rural community, and beyond. The processed pearl nacre provides the possibility of alleviating problems associated with neurotrauma following injury, and for skin regenera ....Processing Pearl Nacre for Bio-Nanotechnology. Nanotechnology has exciting potential to solve major health challenges of the 21st century. The proposed research focuses on developing health care products, derived from a renewable waste stream resource from the pearling industry, en route to establishing products to benefit the rural community, and beyond. The processed pearl nacre provides the possibility of alleviating problems associated with neurotrauma following injury, and for skin regeneration following burns. The recently established powerful multidisciplinary research team in partnership with Pearl Technology combines expertise in chemical processing, nanotechnology, biochemistry, neuroscience and tissue engineering, also providing a basis for quality research training.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0989804
Funder
Australian Research Council
Funding Amount
$150,000.00
Summary
A Universal Nano Tribometer for Surface and Thin Film Characterisation. The proposed infrastructure will be of major benefit to a large number of ARC funded research projects involving chracterisation of materials at four universities UOW,QUT, UNSW and CDU. The project will extend the research capability of the participating researchers and facilitate innovative projects and new research direction in advanced materials processing in the nano/micro scale. This in turn will lead to improved intern ....A Universal Nano Tribometer for Surface and Thin Film Characterisation. The proposed infrastructure will be of major benefit to a large number of ARC funded research projects involving chracterisation of materials at four universities UOW,QUT, UNSW and CDU. The project will extend the research capability of the participating researchers and facilitate innovative projects and new research direction in advanced materials processing in the nano/micro scale. This in turn will lead to improved international competitiveness of Australian industry.Read moreRead less
Special Research Initiatives - Grant ID: SR0354588
Funder
Australian Research Council
Funding Amount
$10,000.00
Summary
Integrated Nanoscale Biosystems Network (INBN). The INBN will integrate high-priority research, already identified by the ARC, in materials nanoscience and engineering with nanoscale biology. The INBN will provide the means to consolidate world-class multidisciplinary Australian research groups in existing Centres of Excellence, including several Federation Fellows, into a nanobiotechnology focus. The significant outcomes of INBN are the critical mass of outstanding researchers in the nanobiosci ....Integrated Nanoscale Biosystems Network (INBN). The INBN will integrate high-priority research, already identified by the ARC, in materials nanoscience and engineering with nanoscale biology. The INBN will provide the means to consolidate world-class multidisciplinary Australian research groups in existing Centres of Excellence, including several Federation Fellows, into a nanobiotechnology focus. The significant outcomes of INBN are the critical mass of outstanding researchers in the nanobiosciences, facilitation of innovative research to produce novel intellectual property and provision of pathways into collaborative research with international scientists and industry, and the training and development of the next generation scientists for this emerging discipline.
Read moreRead less
Damage-Free Surfacing of Large Brittle Wafers with On-Machine Flatness Control. The knowledge gained from this research project will be of great value to the development of new generations of high-integrity semiconductor systems for high-speed telecommunication, large-scale computation, transport, biomedicine, agriculture, mining and security. The outcomes will have significant impact on the ultra-precision discipline scientifically and will sharpen the competitive edge of the Australian fabrica ....Damage-Free Surfacing of Large Brittle Wafers with On-Machine Flatness Control. The knowledge gained from this research project will be of great value to the development of new generations of high-integrity semiconductor systems for high-speed telecommunication, large-scale computation, transport, biomedicine, agriculture, mining and security. The outcomes will have significant impact on the ultra-precision discipline scientifically and will sharpen the competitive edge of the Australian fabrication industry. The research will open up remarkable opportunities for young researchers to work in one of the most frontier fields in the 21st century.Read moreRead less
Development of Knowledge Based Process Planning System for Non-Symmetrical Sheet Metal Forming Processes. Sheet metal and automotive industries need to continually improve their strategic competitive advantages with flexibility and cost-effectiveness to remain competitive in a changing world economy. In order to achieve this, the primary objective in the proposed research is to design and develop a knowledge-based process planning system for non-symmetrical products produced by deep drawing pro ....Development of Knowledge Based Process Planning System for Non-Symmetrical Sheet Metal Forming Processes. Sheet metal and automotive industries need to continually improve their strategic competitive advantages with flexibility and cost-effectiveness to remain competitive in a changing world economy. In order to achieve this, the primary objective in the proposed research is to design and develop a knowledge-based process planning system for non-symmetrical products produced by deep drawing processes. This objective will be achieved by investigating the effect of process variable on drawability of sheet material, by obtaining relevant process information through necessary experimentation and finite element analysis and by development of a rule base by acquiring process information from domain experts selected from number of sheet metal manufacturing industries.Read moreRead less
The Surface Science of Vacuum Glazing. In order to achieve a stable vacuum in evacuated glazing, high temperature baking during evacuation is required. The high temperature processing prevents the use of strengthened glass, such as tempered glass. However, samples made at low temperatures suffer from poor vacuum characteristics, particularly when exposed to UV radiation. In this project, we aim to discover the chemical and physical processes occurring on the glass surface responsible for vacuum ....The Surface Science of Vacuum Glazing. In order to achieve a stable vacuum in evacuated glazing, high temperature baking during evacuation is required. The high temperature processing prevents the use of strengthened glass, such as tempered glass. However, samples made at low temperatures suffer from poor vacuum characteristics, particularly when exposed to UV radiation. In this project, we aim to discover the chemical and physical processes occurring on the glass surface responsible for vacuum degradation. We will use this knowledge to develop a low temperature manufacturing process that can be used with tempered glass and results in a high-quality vacuum, stable over the device service life.Read moreRead less
Structures and properties of tissue engineering matrices for cartilage and bone: Imaging, visualising and modelling tissue/scaffold constructs in 3D. Tissue engineering of bone and cartilage has the potential to lower costs and improve outcomes. The first stage requires the design of porous 3D scaffolds. To date they have been found less than ideal for clinical applications. Our ability to design and optimise scaffolds has been ad hoc, as local structure and properties have not been measurable ....Structures and properties of tissue engineering matrices for cartilage and bone: Imaging, visualising and modelling tissue/scaffold constructs in 3D. Tissue engineering of bone and cartilage has the potential to lower costs and improve outcomes. The first stage requires the design of porous 3D scaffolds. To date they have been found less than ideal for clinical applications. Our ability to design and optimise scaffolds has been ad hoc, as local structure and properties have not been measurable during tissue growth and repair. In this proposal, an interdisciplinary group from three universities will utilise microCT imaging, visualisation and numerical modelling to determine these structures and properties. This will provide an invaluable understanding for the further development of tissue engineering scaffolds.Read moreRead less
Tissue Engineering the Meniscus: Combining Novel Biomimetic Hybrid Scaffolds with Adult Stem Cells. Development of a meniscal implant ex vivo will provide significant health and economic benefits, given that worldwide, millions of people annually suffer from meniscus damage or loss. We believe that a tissue engineered meniscus, composed of a novel biomimetic scaffold which guides the differentiation of mesenchymal stem cells in a novel bioreactor will provide a solution to the problem of donor ....Tissue Engineering the Meniscus: Combining Novel Biomimetic Hybrid Scaffolds with Adult Stem Cells. Development of a meniscal implant ex vivo will provide significant health and economic benefits, given that worldwide, millions of people annually suffer from meniscus damage or loss. We believe that a tissue engineered meniscus, composed of a novel biomimetic scaffold which guides the differentiation of mesenchymal stem cells in a novel bioreactor will provide a solution to the problem of donor scarcity in meniscal repair. Success in this project will lead directly to large-animal studies and clinical trials. The training of four early careeer researchers involved in this project will also be of significant benefit to the Australian Tissue Engineering and Biomaterials community.Read moreRead less
Characterization of bioadhesives from marine diatom slimes and their interactions with different substrata; developing environmentally friendly, foul-release coatings. This project represents a collaborative effort between Melbourne University, the Department of Defense and Akzo Nobel to develop new, environmentally friendly strategies to modify and/or prevent marine slime adhesion in anti-foul coatings or paint. Fouling by diatom slimes occurs at great expense to industry and the Australian N ....Characterization of bioadhesives from marine diatom slimes and their interactions with different substrata; developing environmentally friendly, foul-release coatings. This project represents a collaborative effort between Melbourne University, the Department of Defense and Akzo Nobel to develop new, environmentally friendly strategies to modify and/or prevent marine slime adhesion in anti-foul coatings or paint. Fouling by diatom slimes occurs at great expense to industry and the Australian Navy, adding up to 60% annually to the cost of propulsive fuel consumption in shipping. We will characterize the chemical and physical properties of the slime adhesives in order to understand how organisms control adhesion, and use these principles to develop new technology, anti-foul paints.Read moreRead less