The Australian Research Data Commons (ARDC) invites you to participate in a short survey about your
interaction with the ARDC and use of our national research infrastructure and services. The survey will take
approximately 5 minutes and is anonymous. It’s open to anyone who uses our digital research infrastructure
services including Reasearch Link Australia.
We will use the information you provide to improve the national research infrastructure and services we
deliver and to report on user satisfaction to the Australian Government’s National Collaborative Research
Infrastructure Strategy (NCRIS) program.
Please take a few minutes to provide your input. The survey closes COB Friday 29 May 2026.
Complete the 5 min survey now by clicking on the link below.
Crack Propagation within Graded Interfaces. Functionally graded interfaces are a technologically new way of joining materials in a wide range of biomedical and industrial applications. The reduction in the interfacial stresses resulting from the graded interface increases the structural integrity of the component, however, existing models do not fully address issues of plasticity and cyclic fatigue to their fracture. The intention of this study is to investigate how modifications to the ductil ....Crack Propagation within Graded Interfaces. Functionally graded interfaces are a technologically new way of joining materials in a wide range of biomedical and industrial applications. The reduction in the interfacial stresses resulting from the graded interface increases the structural integrity of the component, however, existing models do not fully address issues of plasticity and cyclic fatigue to their fracture. The intention of this study is to investigate how modifications to the ductile reinforcement phase and how the cyclic loading influence crack extension within a graded interface. These results will assist in future design and prediction of the in-service lifetime of components containing gradient interfaces.Read moreRead less
Granular dynamics: characterization, modelling and application. Storage and transport of bulk solids are widely encountered in mineral, metallurgical and chemical industrials which are important to Australia. The design and control of bulk solids handling equipment must be optimised for the efficiency of processing. This project provides a systematic investigation of the techniques used to characterize bulk solids, and applies the new findings to hopper flow and pneumatic conveying. This, togeth ....Granular dynamics: characterization, modelling and application. Storage and transport of bulk solids are widely encountered in mineral, metallurgical and chemical industrials which are important to Australia. The design and control of bulk solids handling equipment must be optimised for the efficiency of processing. This project provides a systematic investigation of the techniques used to characterize bulk solids, and applies the new findings to hopper flow and pneumatic conveying. This, together with the research training offered through the conduct of the work, is very helpful to maintaining Australia’s leading position in bulk solids handling and application in resource, energy, process and allied industries.Read moreRead less
Heat Transfer Mechanisms in an Indirectly Fired Rotary Kiln with Lifters and Its Role in Scaling. This project will apply heat transfer principles to improve and optimise the design and performance of ANSAC's innovative kiln technology for a wide range of process applications. By understanding the mechanisms of heat transfer involved in the working of the proprietary technology, major factors limiting the performance of the kiln can be identified, resulting in design criteria that link key opera ....Heat Transfer Mechanisms in an Indirectly Fired Rotary Kiln with Lifters and Its Role in Scaling. This project will apply heat transfer principles to improve and optimise the design and performance of ANSAC's innovative kiln technology for a wide range of process applications. By understanding the mechanisms of heat transfer involved in the working of the proprietary technology, major factors limiting the performance of the kiln can be identified, resulting in design criteria that link key operating parameters for the kiln scaling and performance forecast. The research outcomes will provide a scientific basis that underpins the development of an Australian technology and supports the growth of a new Australian small business, creating employment opportunities within Australia.Read moreRead less
Development of an Automated Control System for Selection of Optimal Process Parameters in Welding Using Solar Energy Concentration. The objective of this proposed research is to develop an intelligent control system for selection of optimal process parameters in welding using solar energy concentration. This investigation endeavours to address the complex interaction between welding process parameters and quality of weld. The results of the work will lead to signicant advancement of knowledge ....Development of an Automated Control System for Selection of Optimal Process Parameters in Welding Using Solar Energy Concentration. The objective of this proposed research is to develop an intelligent control system for selection of optimal process parameters in welding using solar energy concentration. This investigation endeavours to address the complex interaction between welding process parameters and quality of weld. The results of the work will lead to signicant advancement of knowledge in automation of the welding process and will generate global interest due to its innovation and applications in automotive manufacturing and steel fabrication industries. The research activity proposed in this application is expected to further strengthen the links between QUT and Mokpo National University and will enhance the capabilities of both universities in attracting funding from local manufacturing industries.Read moreRead less
Studies on the Weld Characterstics and Weldability of Welded Joints with Alternate Supply of Shileding Gases in Welding. In today's dynamic changing environment, for industries to remain internationally competitive, traditional manufacturing techniques used for welding have to become more flexible and intelligent to attain better adaptability and higher productivity. In industrial applications of MIG/MAG welding processes, various types of shielding gases are used based on type of work material ....Studies on the Weld Characterstics and Weldability of Welded Joints with Alternate Supply of Shileding Gases in Welding. In today's dynamic changing environment, for industries to remain internationally competitive, traditional manufacturing techniques used for welding have to become more flexible and intelligent to attain better adaptability and higher productivity. In industrial applications of MIG/MAG welding processes, various types of shielding gases are used based on type of work material and weld quality required. In this proposed research, experimental studies will be conducted on welding productivity by using different shielding gas combinations. The aim of this project is to conduct experimental analysis on weld arc phenomenon, weld pool behavior, and weld quality and to build an intelligent system for the selection of optimum combination shielding gas mixtures. In addition this study also aims to examine how the microstructure and mechanical properties of different welds are influenced by the use of different shielding gases combinations.Read moreRead less
Modelling of Pulse Current Parameters and Design of Fuzzy Logic Controller for Uniform Metal Transfer in Pulsed Gas Metal Arc Welding of Aluminium Alloy. The use of aluminium alloys in automotive and aerospace industry is growing across the world. In order to improve the use of aluminium alloy in various industries, the welding process for aluminium need to be improved. The objective of this research is to develop an intelligent controller for welding power source, which is capable of selectin ....Modelling of Pulse Current Parameters and Design of Fuzzy Logic Controller for Uniform Metal Transfer in Pulsed Gas Metal Arc Welding of Aluminium Alloy. The use of aluminium alloys in automotive and aerospace industry is growing across the world. In order to improve the use of aluminium alloy in various industries, the welding process for aluminium need to be improved. The objective of this research is to develop an intelligent controller for welding power source, which is capable of selecting process parameters automatically for varying pulse conditions in welding of aluminium alloys. The fundamental understanding about development of proposed intelligent system with smart controller for uniform metal transfer will create global interest across the welding industry and will create a new market potential throughout world where use of aluminium as a base material is growing.Read moreRead less
A Segmented Interior Permanent Magnet Synchronous Motor for Wide Field Weakening Range and its Sensorless Control using Improved Flux Estimators. Australia has the world's second largest reserve (after China) of high energy-density permanent magnet (neodymium-iron-boron) material for the IPM motor. The present limitation of the machine to be driven sensorless over a wide speed range with field weakening is believed to be holding back its widespread use in applications other than servo-type which ....A Segmented Interior Permanent Magnet Synchronous Motor for Wide Field Weakening Range and its Sensorless Control using Improved Flux Estimators. Australia has the world's second largest reserve (after China) of high energy-density permanent magnet (neodymium-iron-boron) material for the IPM motor. The present limitation of the machine to be driven sensorless over a wide speed range with field weakening is believed to be holding back its widespread use in applications other than servo-type which requires high-resolution mechanical sensors. Extension of the motor speed range by a combination of magnetic system design (for large field weakening range), and sensorless position and flux estimation with sufficient accuracy for fast dynamic control should lead to large scale adoption of this motor, and hence to significant improvement in energy efficiency and market share for Australia.Read moreRead less
Towards a unified theory of constrained control and estimation. The project will investigate the implications of duality and other connections between constrained control and estimation. We believe that the research will result in a richer understanding of these problems. In particular, we envisage an impact in at least four areas: (i) Computational issues, i.e., development of more efficient algorithms for constrained problems. (ii) Geometry of constrained problems, by extending recent results ....Towards a unified theory of constrained control and estimation. The project will investigate the implications of duality and other connections between constrained control and estimation. We believe that the research will result in a richer understanding of these problems. In particular, we envisage an impact in at least four areas: (i) Computational issues, i.e., development of more efficient algorithms for constrained problems. (ii) Geometry of constrained problems, by extending recent results pertaining to constrained control to estimation problems. (iii) Problems with mixed constraints, for example, interval and finite set constraints. (iv) Fundamental limitations imposed by constraints to filtering and control problems.Read moreRead less
Network Design and Management for a Pseudolite and GPS Based Ubiquitous Positioning System. The Locata positioning technology uses a network of terrestrial based signal transmitters (pseudolites) and GPS satellites, to provide ubiquitous positioning (indoors and outdoors) in difficult environments. This research student project will focus on the intelligence associated with the pseudolite network such as: autonomous network installation, network integrity, and quality control. The implementati ....Network Design and Management for a Pseudolite and GPS Based Ubiquitous Positioning System. The Locata positioning technology uses a network of terrestrial based signal transmitters (pseudolites) and GPS satellites, to provide ubiquitous positioning (indoors and outdoors) in difficult environments. This research student project will focus on the intelligence associated with the pseudolite network such as: autonomous network installation, network integrity, and quality control. The implementation of innovative algorithms and methodologies developed in this research, will allow a robust, reliable and accurate positioning system for challenging indoor and outdoor environments, where current systems cannot work satisfactorily.Read moreRead less
Artificial intelligent system for integrated wear debris analysis and vibration analysis in machine condition monitoring. Vibration and wear debris analyses are the two main condition monitoring techniques for machinery maintenance and fault diagnosis. However, they can diagnose less than 50% of faults. A series of experimental and theoretical studies on the correlation of the two techniques will be conducted. This project will integrate advanced technologies including 3D microscopy, neural netw ....Artificial intelligent system for integrated wear debris analysis and vibration analysis in machine condition monitoring. Vibration and wear debris analyses are the two main condition monitoring techniques for machinery maintenance and fault diagnosis. However, they can diagnose less than 50% of faults. A series of experimental and theoretical studies on the correlation of the two techniques will be conducted. This project will integrate advanced technologies including 3D microscopy, neural networks and expert systems to develop an artificial intelligent system based on the dependent and independent roles of the two condition monitoring techniques. Successful outcomes will result in an improved maintenance program and reduction in human involvement, and will provide significant economic benefit to engineering industries.Read moreRead less