Engineering the Next Generation of Broadband Terahertz Technologies. This project proposes a new broadband, high-power, laser technology for THz sensing. This semiconductor laser based THz technology is crucial for a wide range of applications requiring the acquisition of THz spectral signatures of materials and high-frame rate hyper-spectral THz imaging. We propose two pathways to engineer this novel THz technology: using a tuneable, coupled-cavity quantum cascade semiconductor laser and by c ....Engineering the Next Generation of Broadband Terahertz Technologies. This project proposes a new broadband, high-power, laser technology for THz sensing. This semiconductor laser based THz technology is crucial for a wide range of applications requiring the acquisition of THz spectral signatures of materials and high-frame rate hyper-spectral THz imaging. We propose two pathways to engineer this novel THz technology: using a tuneable, coupled-cavity quantum cascade semiconductor laser and by creating the broad emission spectra through active mode locking in a THz semiconductor laser. The THz laser coupled with the self-detection technique is the key to realising this, and will be explored both in model and experiment.Read moreRead less
Quantitative structural health assessment of large membrane-like structures. This project aims to develop a new approach, based on remote sensing and computational modelling, to assess and manage the structural health of large floating covers used for odour control and biogas harvesting to prevent unexpected failures. The project has potential benefits for high-value-added manufacturing and maintenance of these floating covers by Australian industry.
Atomic Resolution Sensors for Imaging and Metrological Science. This project aims to create new sensing technologies for detecting motion on the atomic scale with Megahertz (MHz) bandwidth. Advanced signal processing and communication theory will be applied with the aim of developing new classes of capacitive, inductive and optical position sensors. The resolution and bandwidth are predicted to be a one-hundred fold improvement over the current state-of-the-art. Applications are expected to incl ....Atomic Resolution Sensors for Imaging and Metrological Science. This project aims to create new sensing technologies for detecting motion on the atomic scale with Megahertz (MHz) bandwidth. Advanced signal processing and communication theory will be applied with the aim of developing new classes of capacitive, inductive and optical position sensors. The resolution and bandwidth are predicted to be a one-hundred fold improvement over the current state-of-the-art. Applications are expected to include biomedical imaging, high-speed nanofabrication, high-resolution computer numerical control (CNC) machining, high-speed gas and chemical sensors, and ultra-precise seismometers and gyroscopes.Read moreRead less
Stereolithographic Additive Manufacturing of Semicrystalline Thermoplastics. This project aims to advance the development of high-throughput stereolithographic additive manufacturing of thermoplastic polymers and composites by employing a multi-colour irradiation schemes in conjunction with photopolymerisable, ring-opening monomer resin formulations. The fundamental scientific understanding, engineering expertise, and concomitant technology advances generated by this project are anticipated to e ....Stereolithographic Additive Manufacturing of Semicrystalline Thermoplastics. This project aims to advance the development of high-throughput stereolithographic additive manufacturing of thermoplastic polymers and composites by employing a multi-colour irradiation schemes in conjunction with photopolymerisable, ring-opening monomer resin formulations. The fundamental scientific understanding, engineering expertise, and concomitant technology advances generated by this project are anticipated to enable additive manufacturing to transition from the rapid prototyping of individual, unique items to the high volume production of robust, reprocessable plastic parts. By obviating the large capital expense of conventional fabrication, this developed technology should provide a path to reinvigorate Australian manufacturing.Read moreRead less
Exploiting deep sub-surface temperature-induced phase-transformations for an improved approach to semiconductor laser-dicing. This project aims to explore sub-surface laser-induced phase transformations in semiconductors and to exploit this novel method for ultra-fine laser cutting of semiconductor wafers without debris. The outcomes will be understanding new temperature-induced material modifications and innovative technology development relevant for the semiconductor industry.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE210100184
Funder
Australian Research Council
Funding Amount
$183,437.00
Summary
Femtoliter Liquid Deposition Facility. This project aims to create a research capacity for direct printing of femtolitre volumes of functional liquids onto devices and surfaces. This project expects to enable the development of new sensing and electronic devices that require a novel fabrication step with delicate materials that cannot be deposited using existing processes. Expected outcomes include new chemical and biological sensors created through collaborative research between the partner in ....Femtoliter Liquid Deposition Facility. This project aims to create a research capacity for direct printing of femtolitre volumes of functional liquids onto devices and surfaces. This project expects to enable the development of new sensing and electronic devices that require a novel fabrication step with delicate materials that cannot be deposited using existing processes. Expected outcomes include new chemical and biological sensors created through collaborative research between the partner institutions and researchers. The benefits of this project should include the creation of a new rapid prototyping facility for Australian researchers, and the application of these capabilities for the development of new low-cost sensors for environmental gas sensing and glucose monitoring.Read moreRead less
Development of far Infrared multispectral thermal image sensors . This project aims to develop a technology that will bypass limitations of existing thermal-image sensor pixels to produce multi-spectral imaging of objects with specificity, clarity and sharpness in a wide range of far infrared wavelength regions. This technology has applications in remote sensing, pest control, and precision agriculture. The project is based on an existing collaboration between The University of Melbourne and t ....Development of far Infrared multispectral thermal image sensors . This project aims to develop a technology that will bypass limitations of existing thermal-image sensor pixels to produce multi-spectral imaging of objects with specificity, clarity and sharpness in a wide range of far infrared wavelength regions. This technology has applications in remote sensing, pest control, and precision agriculture. The project is based on an existing collaboration between The University of Melbourne and the start-up company Digital Falcon. Digital Falcon provides extensive industry service in developing custom image analysis algorithms and post processing to visualisation tools. The University of Melbourne provides research expertise in image sensor pixel technology and sensor electronics.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE130101402
Funder
Australian Research Council
Funding Amount
$375,000.00
Summary
Advanced laser micromachining with femtosecond vector beams. This project is aimed at developing a new method for ultra-precision laser micromachining and dissection of biological tissues using femtosecond vector beams. The capability of these unconventional laser beams to process different materials with unsurpassed precision and efficiency offers significant economic and clinical benefits.
Integrated Piezoelectric Microsystems for Actuation and Sensing. Piezoelectric transducers provide the highest positioning accuracy of any known actuator and the highest dynamic force resolution of any known sensor. However, these capabilities are limited to macro scale applications since piezoelectric materials are not compatible with integrated circuit (IC) or Micro-Electro-Mechanical Systems fabrication processes. This project aims to extend the use of piezoelectric materials to the meso- and ....Integrated Piezoelectric Microsystems for Actuation and Sensing. Piezoelectric transducers provide the highest positioning accuracy of any known actuator and the highest dynamic force resolution of any known sensor. However, these capabilities are limited to macro scale applications since piezoelectric materials are not compatible with integrated circuit (IC) or Micro-Electro-Mechanical Systems fabrication processes. This project aims to extend the use of piezoelectric materials to the meso- and micro-scale by fabricating miniature piezoelectric positioning and sensor systems. These devices will include six-axis nano-positioners and ultra-high resolution accelerometers and gyroscopes. This technology will create a new market for devices that are lower cost than macro-scale systems but provide higher performance than silicon based microsystems.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE210101623
Funder
Australian Research Council
Funding Amount
$456,450.00
Summary
High-Fidelity Motion Simulator using Sickness-Free Motion Cueing Algorithm. This project aims to address the key deficiencies of driving and flight simulators by developing novel human perception-based motion cueing algorithms (MCAs) and leveraging advanced artificial intelligence techniques. Despite widespread applications, existing motion simulators fail to deliver the most accurate human sensation to the user. This failure is mainly attributable to the inefficiency and inflexibility of MCAs u ....High-Fidelity Motion Simulator using Sickness-Free Motion Cueing Algorithm. This project aims to address the key deficiencies of driving and flight simulators by developing novel human perception-based motion cueing algorithms (MCAs) and leveraging advanced artificial intelligence techniques. Despite widespread applications, existing motion simulators fail to deliver the most accurate human sensation to the user. This failure is mainly attributable to the inefficiency and inflexibility of MCAs used by simulators. It is expected that this project will significantly increase simulator motion fidelity and eliminate motion sickness. This will have substantial benefits to Australian research communities and industries, particularly where simulators are used for training, performance evaluation and virtual prototyping.Read moreRead less