Low-cost, Lightweight and Liquid Helium-free Superconducting MRI Magnet. This project aims to develop a liquid-helium-free superconducting technology to address the need for more affordable MRI magnets that currently rely on expensive, limited supplies of liquid helium. This project expects to generate a world-first, much needed MRI systems to be operated in persistent mode without a power supply, to obtain high-resolution images and low-cost operation. The expected outcomes include a novel, lig ....Low-cost, Lightweight and Liquid Helium-free Superconducting MRI Magnet. This project aims to develop a liquid-helium-free superconducting technology to address the need for more affordable MRI magnets that currently rely on expensive, limited supplies of liquid helium. This project expects to generate a world-first, much needed MRI systems to be operated in persistent mode without a power supply, to obtain high-resolution images and low-cost operation. The expected outcomes include a novel, lightweight, easy-to-operate magnesium diboride superconducting MRI magnet prototype under persistent mode operation. This should provide significant benefits, including reducing the cost associated with conventional liquid helium-dependent technologies and ensuring Australia at the forefront of MRI development worldwide.Read moreRead less
Enhanced pigment weathering resistance by coating with high dielectric ceramic. The partner company, Tiwest, based in Western Australia, is a major contributor to the economy, and earns more than $A400m annually in exports. It is the only company in the world that mines, separates, refines and manufactures titania products, including pigments, in one region. The current post-titania particle formation wet-coating process, however, presents a major capital and recurrent cost and necessitates a pi ....Enhanced pigment weathering resistance by coating with high dielectric ceramic. The partner company, Tiwest, based in Western Australia, is a major contributor to the economy, and earns more than $A400m annually in exports. It is the only company in the world that mines, separates, refines and manufactures titania products, including pigments, in one region. The current post-titania particle formation wet-coating process, however, presents a major capital and recurrent cost and necessitates a pigment regrind stage. The research will investigate the development of a highly durable dry-coated pigment utilising a novel high dielectric coating. This development has the potential to ensure the partner company's future competitiveness through reduced processing costs and improved product performance.Read moreRead less
Development of Dry Coated Pigment Particles: Durability and Dispersion. Tiwest is the only business in the world that mines, separates, refines and manufactures titanium dioxide products in one region. Tiwest has a major impact on the Western Australian economy with more than 700 full time and contract jobs, export earnings of $400M (in 2004) and regular incomes for an estimated 500 businesses. The current wet pigment particle coating process, to ensure ease of handling and longevity, is a major ....Development of Dry Coated Pigment Particles: Durability and Dispersion. Tiwest is the only business in the world that mines, separates, refines and manufactures titanium dioxide products in one region. Tiwest has a major impact on the Western Australian economy with more than 700 full time and contract jobs, export earnings of $400M (in 2004) and regular incomes for an estimated 500 businesses. The current wet pigment particle coating process, to ensure ease of handling and longevity, is a major cost. An optimised pigment dry-coating process would ensure Tiwest's competitiveness through reduced processing costs and improved performance. This development has the potential to increase Tiwest's profitability by 10%.Read moreRead less
Low-density high-performance proppants for hydraulic fracturing process . Australia has vast resources of unconventional oil/gas, which require hydraulic fracturing to stimulate production. This project aims to develop advanced low-density high-performance proppants from industry waste for hydraulic fracturing. This will be achieved by selecting purer SiO2 raw material, carefully designing the porous structure, and fully understanding its relationship with strength and pack conductivity. Low-den ....Low-density high-performance proppants for hydraulic fracturing process . Australia has vast resources of unconventional oil/gas, which require hydraulic fracturing to stimulate production. This project aims to develop advanced low-density high-performance proppants from industry waste for hydraulic fracturing. This will be achieved by selecting purer SiO2 raw material, carefully designing the porous structure, and fully understanding its relationship with strength and pack conductivity. Low-density means no chemicals in proppant transportation and application. Successful development of such high-performance proppants will significantly increase Australia oil/gas exploration and production with an environmental acceptable technology, a leap forward for the oil/gas industry in Australia and the world.Read moreRead less
AM of MAX Phase parts for applications in extreme environments. This project aims to develop techniques to synthesize MAX Phase compound materials in-situ using laser additive manufacturing. The project expects to increase jet engine fuel efficiency and thrust, and to fabricate longer-lasting parts for supersonic speed applications. The expected outcomes include well-developed additive manufacturing processes to make high performance engineering components with shape complexity for extreme envir ....AM of MAX Phase parts for applications in extreme environments. This project aims to develop techniques to synthesize MAX Phase compound materials in-situ using laser additive manufacturing. The project expects to increase jet engine fuel efficiency and thrust, and to fabricate longer-lasting parts for supersonic speed applications. The expected outcomes include well-developed additive manufacturing processes to make high performance engineering components with shape complexity for extreme environment applications, and new methods to increase the 3D printability of brittle materials. This should provide significant benefits to aerospace and defense industries through solving their long standing bottleneck material and processing problems. The outcomes also enhance Australia’s manufacturing capacity.Read moreRead less
New Paradigm for Materials Technology for AZS Glassmaking Refractories. The project aims to enable the inexpensive manufacture of widely used refractories with reduced energy and materials costs and improved thermal and mechanical properties. The project plans to exploit technology patented by the researchers to fabricate percolated mullite materials from fly ash by sintering, yielding properties equivalent or superior to those of fuse-cast alumina-zirconia-silica refractories (AZS). AZS is expe ....New Paradigm for Materials Technology for AZS Glassmaking Refractories. The project aims to enable the inexpensive manufacture of widely used refractories with reduced energy and materials costs and improved thermal and mechanical properties. The project plans to exploit technology patented by the researchers to fabricate percolated mullite materials from fly ash by sintering, yielding properties equivalent or superior to those of fuse-cast alumina-zirconia-silica refractories (AZS). AZS is expensive since it requires melting by fuse-casting and high-purity raw materials. The project aims to eliminate both requirements by sintering and use of waste fly ash, giving microstructures of dense, direct-bonded, percolated, mullite, single crystals, with residual impurities in the interstices that do not affect creep.Read moreRead less
A next generation 'smart' superconducting magnet system in persistent mode. Superconducting magnet devices use splicing, a process required to maintain the persistence of operation. Currently, the formation mechanism of splicing using magnesium diboride superconductor is complex and not technologically robust for industrial magnet manufacturing. This project aims to develop novel, reliable and economical superconducting splicing technologies that can produce an ultra-stable and uniform magnetic ....A next generation 'smart' superconducting magnet system in persistent mode. Superconducting magnet devices use splicing, a process required to maintain the persistence of operation. Currently, the formation mechanism of splicing using magnesium diboride superconductor is complex and not technologically robust for industrial magnet manufacturing. This project aims to develop novel, reliable and economical superconducting splicing technologies that can produce an ultra-stable and uniform magnetic field against unexpected power outages. Expected outcomes include the development of advanced green and cryogen free superconducting technologies, which would boost the Australian manufacturing industry through access to multi-billion-dollar global markets for power grids, medical imaging and energy generation and storage.Read moreRead less
Fibre-reinforced composites: Single-crystal mullite fibres from topaz. The project aims to develop the means of fabricating single-crystal mullite fibres from topaz that are suitable for reinforcement of metal and ceramic matrix composites. Single-crystal mullite is the most sought after fibrous additive, but is not available commercially. It is expected to attract an immediate clientele in laboratories and companies servicing the aviation industry and the military. This will allow large depos ....Fibre-reinforced composites: Single-crystal mullite fibres from topaz. The project aims to develop the means of fabricating single-crystal mullite fibres from topaz that are suitable for reinforcement of metal and ceramic matrix composites. Single-crystal mullite is the most sought after fibrous additive, but is not available commercially. It is expected to attract an immediate clientele in laboratories and companies servicing the aviation industry and the military. This will allow large deposit of topaz in Torrington, NSW to be used to develop a high-value niche product (fibres) and a large-volume, low-value product (fluoride). This will provide significant economic and environmental benefits and it addresses the research priorities - Resources and Advanced Manufacturing.Read moreRead less
Exploration of lead free ferroelectric crystals for transducer applications. This project aims to investigate lead free crystals, which are expected to possess high piezoelectric properties for medical imaging and underwater acoustics, as an alternative to toxic lead-based ferroelectrics which have been dominantly used in ultrasound transducers. The project will have significant impact on development of new lead-free ferroelectric crystals with desirable properties. This will benefit Australian ....Exploration of lead free ferroelectric crystals for transducer applications. This project aims to investigate lead free crystals, which are expected to possess high piezoelectric properties for medical imaging and underwater acoustics, as an alternative to toxic lead-based ferroelectrics which have been dominantly used in ultrasound transducers. The project will have significant impact on development of new lead-free ferroelectric crystals with desirable properties. This will benefit Australian industry by providing knowledge and technology of crystal growth, enabling advanced ultrasound transducers for medical imaging and underwater acoustic applications.Read moreRead less
New Nanoscale Up-converting Photoluminescent Materials for Passive Safety Visual Systems. The demand for safety and security products is growing as the importance of providing an environment safer from natural, accidental or man-made threats increases in the community. Life safety applications in buildings and work environments as well as trains and planes for example are dependent upon the ability for non-powered passive systems to give efficient visual guidance in dangerous dark and smoke fill ....New Nanoscale Up-converting Photoluminescent Materials for Passive Safety Visual Systems. The demand for safety and security products is growing as the importance of providing an environment safer from natural, accidental or man-made threats increases in the community. Life safety applications in buildings and work environments as well as trains and planes for example are dependent upon the ability for non-powered passive systems to give efficient visual guidance in dangerous dark and smoke filled environments. This project will provide a practical demonstration of the successful implementation of nanotechnology to smaller Australian companies where it will overcome significant drawbacks in current manufacturing and yield new products which are activated in darkness by infrared radiation.Read moreRead less