Crack Propagation within Graded Interfaces. Functionally graded interfaces are a technologically new way of joining materials in a wide range of biomedical and industrial applications. The reduction in the interfacial stresses resulting from the graded interface increases the structural integrity of the component, however, existing models do not fully address issues of plasticity and cyclic fatigue to their fracture. The intention of this study is to investigate how modifications to the ductil ....Crack Propagation within Graded Interfaces. Functionally graded interfaces are a technologically new way of joining materials in a wide range of biomedical and industrial applications. The reduction in the interfacial stresses resulting from the graded interface increases the structural integrity of the component, however, existing models do not fully address issues of plasticity and cyclic fatigue to their fracture. The intention of this study is to investigate how modifications to the ductile reinforcement phase and how the cyclic loading influence crack extension within a graded interface. These results will assist in future design and prediction of the in-service lifetime of components containing gradient interfaces.Read moreRead less
Advanced Proton-Conducting Ceramic FCs for Power Generation from Ammonia . The project aims to design an innovative ammonia fuel cell using a new perovskite substrate decorated with metal nanoparticles, which demonstrates multi-functionalities and tackles most challenges of conventional fuel cells (FCs). The key concept of this project is the designing of the novel architected smart perovskite as both anode and electrolyte of the fuel cell by systematic modelling and experimental development. T ....Advanced Proton-Conducting Ceramic FCs for Power Generation from Ammonia . The project aims to design an innovative ammonia fuel cell using a new perovskite substrate decorated with metal nanoparticles, which demonstrates multi-functionalities and tackles most challenges of conventional fuel cells (FCs). The key concept of this project is the designing of the novel architected smart perovskite as both anode and electrolyte of the fuel cell by systematic modelling and experimental development. The versatile cell components developed in this project will improve the operational stability and efficiency of the fuel cell, thereby providing a promising pathway for ammonia fuel cells to replace hydrogen fuel cells. This study will reinforce the development of the future supply of reliable, low cost and clean energy. Read moreRead less
Modification of optical properties of photocatalytic titania. The aim of the project is to capitalise on and optimise the recently discovered successful modification of the optical properties of titanium oxide (TiO2), such that efficient solar splitting of water is possible. TiO2 photocatalysts of adequate efficiency will be implemented as photoanodes in photoelectrochemical cells capable of large-scale production of hydrogen.
Design of hollow nanoparticles of titania for the sustainable production of hydrogen from water using sunlight. Hydrogen is a clean and non-polluting fuel that is the natural and sustainable replacement for greenhouse gas emitting fossil fuels. Because of its abundant sunlight and vast titanium reserves (the world's largest) Australia is especially well-placed to develop the technology of producing hydrogen directly from water and sunlight using a titanium dioxide photo-anode. This research, whi ....Design of hollow nanoparticles of titania for the sustainable production of hydrogen from water using sunlight. Hydrogen is a clean and non-polluting fuel that is the natural and sustainable replacement for greenhouse gas emitting fossil fuels. Because of its abundant sunlight and vast titanium reserves (the world's largest) Australia is especially well-placed to develop the technology of producing hydrogen directly from water and sunlight using a titanium dioxide photo-anode. This research, which consists of computational and experimental parts, is focused on laying the scientific foundation for that technology to be commercially viable. The national and community benefits are the availability of an inexpensive, limitless and clean fuel, reduction in reliance on energy imports, reduction in greenhouse gas emissions and resultant global warming.Read moreRead less
Some Outstanding Mechanics Problems in Layered Ferroelectromagnetic Composites with Enhanced Magnetoelectric Effect. The proposed research has high impact on both science and technology of ferroelectromagnetic materials. The outcomes will expand Australia's knowledge base and research capability in this emerging field. Relevant industries, such as smart materials and devices, can benefit from the results of this project. The theoretical, experimental and numerical results can be directly transfo ....Some Outstanding Mechanics Problems in Layered Ferroelectromagnetic Composites with Enhanced Magnetoelectric Effect. The proposed research has high impact on both science and technology of ferroelectromagnetic materials. The outcomes will expand Australia's knowledge base and research capability in this emerging field. Relevant industries, such as smart materials and devices, can benefit from the results of this project. The theoretical, experimental and numerical results can be directly transformed to design and application guidelines for the materials engineers and scientists to develop innovative and structurally/functionally reliable ferroelectromagnetic composites and their various devices and products.Read moreRead less
Design of Nanoporous BCN with Tunable Pores for CO2 Capture and Conversion. This project aims to design and develop advanced boron carbon nitride-based materials with high specific surface areas, tunable pores and functional groups, guided by theoretical calculations for the capture of CO2 at ambient conditions. By introducing single metal atoms in the above nanostructures, we also aim to design a novel catalytic system for the effective conversion of CO2 into fine chemicals. This project will o ....Design of Nanoporous BCN with Tunable Pores for CO2 Capture and Conversion. This project aims to design and develop advanced boron carbon nitride-based materials with high specific surface areas, tunable pores and functional groups, guided by theoretical calculations for the capture of CO2 at ambient conditions. By introducing single metal atoms in the above nanostructures, we also aim to design a novel catalytic system for the effective conversion of CO2 into fine chemicals. This project will offer new knowledge on the design of low-cost advanced materials with specific functionalities for the simultaneous capture and conversion of CO2. This project will make a significant impact on Australian industries and further offer job opportunities and economic benefits by offering new technologies for a clean environment.Read moreRead less
Enhanced electro-active properties in polycrystalline ceramics: a multi-length-scale approach. Electro-active materials are used in a wide range of devices including ultrasound imaging equipment and nano-positioning systems. This project will determine the most fundamental mechanisms at work in these materials allowing for the optimisation of high-performance and environmentally friendly electro-active devices for future industries.
Innovative High Temperature Carbon–Air Batteries for High Power Generation. The project intends to develop carbon-air batteries which are expected to have energy density 10 times that of lithium-ion batteries. The battery is designed to use naturally-rich carbon as fuel, highly energy-efficient solid oxide fuel cells as electrochemical reactors, and an integrated mixed conducting ceramic membrane for in situ carbon dioxide separation. The success of this project would provide us with a low-carbo ....Innovative High Temperature Carbon–Air Batteries for High Power Generation. The project intends to develop carbon-air batteries which are expected to have energy density 10 times that of lithium-ion batteries. The battery is designed to use naturally-rich carbon as fuel, highly energy-efficient solid oxide fuel cells as electrochemical reactors, and an integrated mixed conducting ceramic membrane for in situ carbon dioxide separation. The success of this project would provide us with a low-carbon energy system based on Australia’s rich coal resources. New knowledge about carbon dioxide separation may also facilitate carbon dioxide sequestration in other fields.Read moreRead less
Wet Particulate Materials - Flow or Fracture? Most advanced materials are produced from starting materials in the form of fine particles. Powders, especially in ceramic engineering, are first processed wet into near-final shape. Improved understanding of the fracture of particle networks is critical in order to process nano-sized advanced ceramic materials for use in solar energy harvesting and extreme heat engine applications as well as minimising drying cracks in paints and coatings. The resea ....Wet Particulate Materials - Flow or Fracture? Most advanced materials are produced from starting materials in the form of fine particles. Powders, especially in ceramic engineering, are first processed wet into near-final shape. Improved understanding of the fracture of particle networks is critical in order to process nano-sized advanced ceramic materials for use in solar energy harvesting and extreme heat engine applications as well as minimising drying cracks in paints and coatings. The research aims to identify the fundamental link between particle network strength and structure and the fracture of wet powder bodies. The microscopic mechanisms that control the behaviour will be investigated with a particular focus on toughening mechanisms including the influence of plasticity.Read moreRead less
A New Paradigm for the Solid State Synthesis of Layered Materials. Advanced ceramic materials with outstanding properties or combinations of properties are usually made from three (ternary) or more components. Their solid-state synthesis is hampered by the formation and retention of intermediate phases which degrade their performance. We have devised a method for circumventing intermediate phase formation in advanced materials and reducing synthesis temperatures by up to 600 degrees. This projec ....A New Paradigm for the Solid State Synthesis of Layered Materials. Advanced ceramic materials with outstanding properties or combinations of properties are usually made from three (ternary) or more components. Their solid-state synthesis is hampered by the formation and retention of intermediate phases which degrade their performance. We have devised a method for circumventing intermediate phase formation in advanced materials and reducing synthesis temperatures by up to 600 degrees. This project will explore the underlying atomic scale mechanism of the method. This knowledge will allow the low cost, low greenhouse gas emission synthesis of advanced ceramics for use in renewable, conventional and nuclear power generation.Read moreRead less