Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0453320
Funder
Australian Research Council
Funding Amount
$347,886.00
Summary
Advanced Spectroscopy for Nano-characterisation of Materials Chemistry and Properties. This application proposes to establish a cutting-edge spectroscopic facility which includes; electron energy-loss spectroscopy (EELS), energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), photoluminescence (PL) and micro-Raman spectroscopy. Each of the spectrometers to be installed has significantly higher sensitivity and resolution than any other facility available in Australia and is capable ....Advanced Spectroscopy for Nano-characterisation of Materials Chemistry and Properties. This application proposes to establish a cutting-edge spectroscopic facility which includes; electron energy-loss spectroscopy (EELS), energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), photoluminescence (PL) and micro-Raman spectroscopy. Each of the spectrometers to be installed has significantly higher sensitivity and resolution than any other facility available in Australia and is capable of full spectrum imaging. This new spectroscopic infrastructure will enable the knowledge-based development of new materials by allowing complete characterisation of structure-composition-property relationships at the nanometre level.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0238960
Funder
Australian Research Council
Funding Amount
$940,000.00
Summary
High Performance Semiconductor Micromachining Facility. The purpose of this project is to make available to the Australian semiconductor research community a facility to undertake specialist deposition and etching tasks needed for fabrication of next generation solar cells, microelectronics, optronics, and micro-electromechanical systems. The facility will have the flexibility to allow independent control of major process parameters, allowing development of new fabrication technologies which wi ....High Performance Semiconductor Micromachining Facility. The purpose of this project is to make available to the Australian semiconductor research community a facility to undertake specialist deposition and etching tasks needed for fabrication of next generation solar cells, microelectronics, optronics, and micro-electromechanical systems. The facility will have the flexibility to allow independent control of major process parameters, allowing development of new fabrication technologies which will be generic to a wide range of semiconductor materials. In particular, the facility will be unique in its ability to perform processes at low temperatures, and under conditions that allow optimisation of the deposition and etching processes, without compromising the performance of delicate devices or exceeding the maximum process temperature limitations found in many mainstream semiconductor materials technologies.Read moreRead less
Improving optical data storage and micromachining technology through better modelling and characterisation of their laser beams. The laser sources generally do not have simple (Gaussian) distributions. The applicant has recently developed a model, describing free propagation of complex (non-Gaussian) laser beams. This project seeks to develop a comprehending model for laser beams propagation through complex optical systems. The effects of various optical elements will be defined employing a no ....Improving optical data storage and micromachining technology through better modelling and characterisation of their laser beams. The laser sources generally do not have simple (Gaussian) distributions. The applicant has recently developed a model, describing free propagation of complex (non-Gaussian) laser beams. This project seeks to develop a comprehending model for laser beams propagation through complex optical systems. The effects of various optical elements will be defined employing a novel method known as SAFE (Stable Aggregate of Flexible Elements) which is a compromise between geometrical and physical optics. Applying this model to micromachining and optical data storage (ODS), which need high beam quality (low divergence and good focussibility), enable accurate predictive capability critical to the optimisation of micromachining and ODS designs.Read moreRead less
Scaling-up microstructured fibres for terahertz radiation. Terahertz radiation is the last region of the electromagnetic spectrum to be fully utilised. Many applications have been identified but their practicality has been limited by a lack of low-loss flexible waveguides. The waveguides to be developed in this project will build on Australia's existing international lead and investments in photonics as well as extend the dynamic field of microstructured optical fibres, indentified as the 'futur ....Scaling-up microstructured fibres for terahertz radiation. Terahertz radiation is the last region of the electromagnetic spectrum to be fully utilised. Many applications have been identified but their practicality has been limited by a lack of low-loss flexible waveguides. The waveguides to be developed in this project will build on Australia's existing international lead and investments in photonics as well as extend the dynamic field of microstructured optical fibres, indentified as the 'future' of optical fibres. Low-loss flexible waveguides will enable imaging and spectroscopy applications that can reveal and object's internal structure and composition. This will have immediate applications in security, quality control, medical imaging and other safety or industrial applications.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0667994
Funder
Australian Research Council
Funding Amount
$1,000,000.00
Summary
National Nanolithography Facility. Nanotechnology is expected to have a major impact on quality of life and global economy. It is predicted to generate revenues as big as the ICT sector in 20 years time. The National Nanolithography Facility will enhance the Australian capability in the field of nanoscale science and technology. This will enable Australian researchers to achieve major impacts in many areas of nanotechnology with a strong potential impact on industry sectors such as computers, ....National Nanolithography Facility. Nanotechnology is expected to have a major impact on quality of life and global economy. It is predicted to generate revenues as big as the ICT sector in 20 years time. The National Nanolithography Facility will enhance the Australian capability in the field of nanoscale science and technology. This will enable Australian researchers to achieve major impacts in many areas of nanotechnology with a strong potential impact on industry sectors such as computers, communications, defence, health, bio-security. This facility has the potential for developing new technologies of fundamental as well as applied interest.Read moreRead less
Raman conversion in diamond: Next generation long and far infrared and terahertz lasers. Through the creation of practical and powerful long wave infrared and terahertz lasers, this project will enable more rapid progress in many fields of science and technology, and in important medical, environmental and safeguarding applications of national priority. Australia also stands to benefit economically via commercialization of diamond-based Raman lasers and instruments into the market. The project w ....Raman conversion in diamond: Next generation long and far infrared and terahertz lasers. Through the creation of practical and powerful long wave infrared and terahertz lasers, this project will enable more rapid progress in many fields of science and technology, and in important medical, environmental and safeguarding applications of national priority. Australia also stands to benefit economically via commercialization of diamond-based Raman lasers and instruments into the market. The project will produce highly-trained researchers and students in the theory, design and development of diamond sources, enhance Australia's existing strengths in waveguide optics and photonics, and place Australia at the forefront of research in long-wave infrared and terahertz science.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0883038
Funder
Australian Research Council
Funding Amount
$160,000.00
Summary
Upgrade key fabrication equipment for specialty fibre and device research and development. Australia remains a world leader in enabling technologies spanning information and communication, lasers, photonic sensing and diagnostics and much more. Underpinning much of this have been key backbone facilities at UNSW and at Sydney. Optical fibre research internationally is moving in new directions and for Australia to continue its leadership role, dedicated facilities for new generation structured opt ....Upgrade key fabrication equipment for specialty fibre and device research and development. Australia remains a world leader in enabling technologies spanning information and communication, lasers, photonic sensing and diagnostics and much more. Underpinning much of this have been key backbone facilities at UNSW and at Sydney. Optical fibre research internationally is moving in new directions and for Australia to continue its leadership role, dedicated facilities for new generation structured optical fibres, which are already impacting much more significantly than conventional fibres, must be available. The upgrade at UNSW will position Australia to continue its leadership and introduce educational and vocational training for the new industries that will depend on these core technologies. Read moreRead less
Nanoparticle fluorescent labels as a platform for high throughput data gathering. Recent developments in genomics require gathering of vast amounts of information in a rapid and cost-effective fashion. To this aim we will develop a new fluorescent labelling technology with adequate throughput and high level of multiplexing. We will exploit recent advances in nanoparticle science combined with our own discoveries concerning rare earth ions as fluorescence activators. Our approach promises a combi ....Nanoparticle fluorescent labels as a platform for high throughput data gathering. Recent developments in genomics require gathering of vast amounts of information in a rapid and cost-effective fashion. To this aim we will develop a new fluorescent labelling technology with adequate throughput and high level of multiplexing. We will exploit recent advances in nanoparticle science combined with our own discoveries concerning rare earth ions as fluorescence activators. Our approach promises a combination of great technological simplicity, low fabrication costs, cutting edge performance and gives an additional time-resolved modality. Our fluorescent labels will be field-tested to search for yet unknown microorganisms.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0882816
Funder
Australian Research Council
Funding Amount
$500,000.00
Summary
Micro and Nanostructure Optical Characterisation Facility. This facility will allow the carrying out of research in the area of micro and nanostructures which are of interest to Australian industry. Access to state of the art facilities will provide opportunities to train PhD students and post-doctoral fellows in the advanced science and technology fields of national and industrial interest. New technologies developed in this area have the potential to improve the quality of life, e.g. National ....Micro and Nanostructure Optical Characterisation Facility. This facility will allow the carrying out of research in the area of micro and nanostructures which are of interest to Australian industry. Access to state of the art facilities will provide opportunities to train PhD students and post-doctoral fellows in the advanced science and technology fields of national and industrial interest. New technologies developed in this area have the potential to improve the quality of life, e.g. National security, communications, health care.Read moreRead less
Cost effective high output polymer fibre optic lighting systems. A new flexible composite polymer can transport light over distances beyond 30 metres within diameters of 5mm to 25mm and still be intrinsically bright. The link between composition, transport efficiency and output will be established. Input studies will include tailored external optics and full integration of bright LED's inside the cable. Prototypes evaluated will include, lighting inside display refrigeration, "on person" safety ....Cost effective high output polymer fibre optic lighting systems. A new flexible composite polymer can transport light over distances beyond 30 metres within diameters of 5mm to 25mm and still be intrinsically bright. The link between composition, transport efficiency and output will be established. Input studies will include tailored external optics and full integration of bright LED's inside the cable. Prototypes evaluated will include, lighting inside display refrigeration, "on person" safety and fashion lighting (including novel jewellery), solar powered LED lighting for remote areas (including roadworks, stand alone signs, developing country and remote rural homes), daylight and lamps together in the one cable, and general lighting. Many of these will be developed by the industry collaborator.Read moreRead less