Optomechanical refrigeration of electronic circuits. The project aims to apply laser light to reduce the temperature of electronic circuits. This aims to greatly suppress electronic noise, and enable a new class of technologies for future telecommunication systems. By developing new techniques to confine light, electric fields and vibrations at sub-micron scale on a silicon chip, devices such as ultralow noise amplifiers, clocks and radio frequency receivers will be realised, along with ultra-ef ....Optomechanical refrigeration of electronic circuits. The project aims to apply laser light to reduce the temperature of electronic circuits. This aims to greatly suppress electronic noise, and enable a new class of technologies for future telecommunication systems. By developing new techniques to confine light, electric fields and vibrations at sub-micron scale on a silicon chip, devices such as ultralow noise amplifiers, clocks and radio frequency receivers will be realised, along with ultra-efficient optical modulators. In future, these technologies could reduce energy consumption and improve reliability in telecommunication networks. They could improve the range of satellite communication, robustness of GPS against cosmic radiation, and performance of surveillance systems such as radar and sonar.Read moreRead less
Early-Stage Medical Diagnostics by Plasmon-Mediated Gas Sensing. This project will investigate the use plasmonic absorption of light in metal nanostructures to activate the selective oxidation/reduction of a gas molecule on a semiconductor nanoparticle. This concept will be used with the aim of developing a sensing technique capable of measuring ultra-low concentrations (ppb) of breath markers for lung cancer detection. It is expected that porous sensing films of semiconductor and metal nanopart ....Early-Stage Medical Diagnostics by Plasmon-Mediated Gas Sensing. This project will investigate the use plasmonic absorption of light in metal nanostructures to activate the selective oxidation/reduction of a gas molecule on a semiconductor nanoparticle. This concept will be used with the aim of developing a sensing technique capable of measuring ultra-low concentrations (ppb) of breath markers for lung cancer detection. It is expected that porous sensing films of semiconductor and metal nanoparticles with well-defined light absorption properties will be fabricated. Superior selectivity will be achieved by matching the wavelength of the absorbed light with the required activation energy for oxidation/reduction. Successful outcomes will enable multi-analyte fingerprint identification by on-chip devices with applications ranging from portable medical diagnostics to national security.Read moreRead less
Ultraprecise sensing with microcavity optomechanics. New technologies will be developed to observe nanoscale motion with light confined on a silicon chip. Based on advances in integrated photonics and nanofabrication, these technologies will enable microscale magnetic field, mass, and gas sensing with precision surpassing today’s state-of-the-art. Important proof-of-principle applications will be realised, including ultrasensitive monitoring of greenhouse emissions, hydrogen absorption into fuel ....Ultraprecise sensing with microcavity optomechanics. New technologies will be developed to observe nanoscale motion with light confined on a silicon chip. Based on advances in integrated photonics and nanofabrication, these technologies will enable microscale magnetic field, mass, and gas sensing with precision surpassing today’s state-of-the-art. Important proof-of-principle applications will be realised, including ultrasensitive monitoring of greenhouse emissions, hydrogen absorption into fuel cell materials, space communication technologies, and magnetic resonance techniques for diagnosis of disease and airport security. The capacity to observe microscopic processes with record precision will further enable fundamental studies in areas such as condensed matter physics and photosynthesis.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0453320
Funder
Australian Research Council
Funding Amount
$347,886.00
Summary
Advanced Spectroscopy for Nano-characterisation of Materials Chemistry and Properties. This application proposes to establish a cutting-edge spectroscopic facility which includes; electron energy-loss spectroscopy (EELS), energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), photoluminescence (PL) and micro-Raman spectroscopy. Each of the spectrometers to be installed has significantly higher sensitivity and resolution than any other facility available in Australia and is capable ....Advanced Spectroscopy for Nano-characterisation of Materials Chemistry and Properties. This application proposes to establish a cutting-edge spectroscopic facility which includes; electron energy-loss spectroscopy (EELS), energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), photoluminescence (PL) and micro-Raman spectroscopy. Each of the spectrometers to be installed has significantly higher sensitivity and resolution than any other facility available in Australia and is capable of full spectrum imaging. This new spectroscopic infrastructure will enable the knowledge-based development of new materials by allowing complete characterisation of structure-composition-property relationships at the nanometre level.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE190100641
Funder
Australian Research Council
Funding Amount
$422,079.00
Summary
Brillouin microscopy for high-speed imaging of rigidity within cells. This project aims to improve the sensitivity and speed of Brillouin microscopes. Brillouin microscopes use light to measure the stiffness of samples in 3D without requiring physical access, allowing their use in inaccessible locations such as the interior of cells or within intact tissue. However, Brillouin microscopes are too slow to be used in most research. This project introduces a new approach based on different optical p ....Brillouin microscopy for high-speed imaging of rigidity within cells. This project aims to improve the sensitivity and speed of Brillouin microscopes. Brillouin microscopes use light to measure the stiffness of samples in 3D without requiring physical access, allowing their use in inaccessible locations such as the interior of cells or within intact tissue. However, Brillouin microscopes are too slow to be used in most research. This project introduces a new approach based on different optical physics that is expected to enable faster and more precise imaging. The microscope will be used to study the movement of amoeba, where it is expected to reveal the controlled stiffening and fluidising of the different regions of protoplasm believed to underlie the cell mobility.Read moreRead less
A new nano-sensor technology for the detection and identification of residual vapours of explosives, drugs and chemicals in the air. Fighting terrorism and crime is one of the most important and difficult tasks that requires substantial human and technological resources. This project will help to address this enormous problem by developing a new optical sensor technology for the detection and identification of traces of chemicals, explosives, drugs and biological agents. It will develop a labora ....A new nano-sensor technology for the detection and identification of residual vapours of explosives, drugs and chemicals in the air. Fighting terrorism and crime is one of the most important and difficult tasks that requires substantial human and technological resources. This project will help to address this enormous problem by developing a new optical sensor technology for the detection and identification of traces of chemicals, explosives, drugs and biological agents. It will develop a laboratory prototype of this sensor that is expected to have superior sensitivity and operational capabilities. Thus it will noticeably contribute to practical law enforcement, air quality and environmental monitoring, counter-terrorism, air safety, border security and customs service. It will also lead to further development of nano-optics and nanotechnology in Australia. Read moreRead less
Probe-free biophysical force and torque measurements with optical tweezers. This project aims to develop probe-free biophysical force and torque measurement methods based on optical tweezers. Many areas of research in cell biology are hampered by a lack of quantitative force measurements. This project aims to provide accurate quantitative measurements to enable in-depth understanding of forces at work during cell division, properties of blood cells and sperm motility which could generate further ....Probe-free biophysical force and torque measurements with optical tweezers. This project aims to develop probe-free biophysical force and torque measurement methods based on optical tweezers. Many areas of research in cell biology are hampered by a lack of quantitative force measurements. This project aims to provide accurate quantitative measurements to enable in-depth understanding of forces at work during cell division, properties of blood cells and sperm motility which could generate further research leading to health benefits.Read moreRead less
Optically-driven micromachines and microtools. The use of optical forces to trap and manipulate microscopic particles has developed from a novelty into a widely used versatile research tool - optical tweezers. New advances, such as the application and optical measurement of optical torque, have been brought to the brink of practical application. We will apply these methods to the development and production of micromachines of unprecedently small size, and the development of new medical diagnosti ....Optically-driven micromachines and microtools. The use of optical forces to trap and manipulate microscopic particles has developed from a novelty into a widely used versatile research tool - optical tweezers. New advances, such as the application and optical measurement of optical torque, have been brought to the brink of practical application. We will apply these methods to the development and production of micromachines of unprecedently small size, and the development of new medical diagnostic techniques, and industrial and research tools.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0882580
Funder
Australian Research Council
Funding Amount
$400,000.00
Summary
Laser facility for quantum optics, imaging, and fabrication. The laser facility will play a role in advancing high-profile leading-edge Australian research underpinning a diverse range of technologies, from quantum communications and quantum computing, to biomedical imaging, fibre sensing and nanofabrication.
Intravital super-resolution imaging via Stimulated Emission Depletion microscopy (STED)-microendoscopy. We will develop a new technology to enable the imaging of sub-cellular structures within a biological specimen, with super-resolution. This intravital super-resolution imaging technology will build off world leading techniques to image objects with super-resolution and to perform this within a specimen, with minimal invasion. The broad ramifications of this technology apply to biology, medical ....Intravital super-resolution imaging via Stimulated Emission Depletion microscopy (STED)-microendoscopy. We will develop a new technology to enable the imaging of sub-cellular structures within a biological specimen, with super-resolution. This intravital super-resolution imaging technology will build off world leading techniques to image objects with super-resolution and to perform this within a specimen, with minimal invasion. The broad ramifications of this technology apply to biology, medical science, imaging and sensing. Important applications include the early detection of debilitating diseases and the advancement of understanding of cellular biology. This research will raise Australia's profile as a world leader in science and technology, building on our emerging presence in the biophysical sciences.Read moreRead less