Sequence-Defined Polymers with Optical Information Readout. The project aim is to introduce the first optically readable sequence-defined polymers based on fluorophore excimers, whose information content can be read as simply as conventional barcodes. These macromolecular barcodes, embedded in solid polymer matrices, will overcome the current limitations of reading information from synthetic macromolecules. An interdisciplinary effort will fuse chemistry, law, and criminology to develop the tec ....Sequence-Defined Polymers with Optical Information Readout. The project aim is to introduce the first optically readable sequence-defined polymers based on fluorophore excimers, whose information content can be read as simply as conventional barcodes. These macromolecular barcodes, embedded in solid polymer matrices, will overcome the current limitations of reading information from synthetic macromolecules. An interdisciplinary effort will fuse chemistry, law, and criminology to develop the technology in ways that are expected to address illicit plastic waste trafficking – ending the anonymity of polymer waste by creating a regulatory and criminological paradigm for tracing plastic waste to hold actors in the value chain responsible.Read moreRead less
Microspheres from (Sun)Light – A Sustainable Materials Platform. This project will break new ground in light-induced step-growth precipitation polymerisation techniques for polymer particle formation that do not require any initiator, surfactants, additives or heating, thus constituting an environmentally friendly process. The project will establish the underpinning photochemical particle formation processes and establish a broad monomer base for the production of particles with a wide property ....Microspheres from (Sun)Light – A Sustainable Materials Platform. This project will break new ground in light-induced step-growth precipitation polymerisation techniques for polymer particle formation that do not require any initiator, surfactants, additives or heating, thus constituting an environmentally friendly process. The project will establish the underpinning photochemical particle formation processes and establish a broad monomer base for the production of particles with a wide property profile, including particles with tailored surface properties and the ability to degrade upon a defined trigger signal. Scaling the particles' synthesis, including using Australian sunlight, will enable multi-gram production allowing real-world applications.Read moreRead less
Sustainable polymer construction materials from agricultural waste. Agricultural waste is the world's most abundant petroleum alternative for transformation into environmentally friendly bio-based materials for the construction sectors. Bringing together complimentary research expertise between academia and industry, this project aims to address this opportunity and develop technologies that economically convert agricultural wastes to crude-oils to produce bio-based resins, adhesives and polyure ....Sustainable polymer construction materials from agricultural waste. Agricultural waste is the world's most abundant petroleum alternative for transformation into environmentally friendly bio-based materials for the construction sectors. Bringing together complimentary research expertise between academia and industry, this project aims to address this opportunity and develop technologies that economically convert agricultural wastes to crude-oils to produce bio-based resins, adhesives and polyurethane. This project expects to produce ready-to-use, total replacements for petroleum-based construction materials. This should provide significant benefits including supporting Australian manufacturing by delivering technologies for sustainable and rapid adoption in the construction, resin and coating industries. Read moreRead less
Understanding production and application of alpha emitting radionuclides. This project aims to develop new materials to improve the efficiency of production of radionuclides, as well as tools to improve our understanding of isotope decay products to to improve efficiency of delivery. High performance polymers will be evaluated to establish optimal design properties for enhanced radionuclide collection from novel generators of isotopic lead (Pb-212), and new methods will be developed to improve u ....Understanding production and application of alpha emitting radionuclides. This project aims to develop new materials to improve the efficiency of production of radionuclides, as well as tools to improve our understanding of isotope decay products to to improve efficiency of delivery. High performance polymers will be evaluated to establish optimal design properties for enhanced radionuclide collection from novel generators of isotopic lead (Pb-212), and new methods will be developed to improve understanding of isotope product stability. Anticipated outcomes will provide greater production and utility of radioisotopes in radiopharmaceuticals, while building strong ties with partner AdvanCell Isotopes. This could improve manufacture of radionuclides, expanding capability and applications in radiopharmaceuticals.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE240100917
Funder
Australian Research Council
Funding Amount
$457,647.00
Summary
Manufacturing Nanostructured Metallic Materials via 3D Printed Polymers. This project aims to develop additive manufacturing processes capable of rapidly producing nanostructured polymer and metallic materials with tuneable physical and chemical properties. This project expects to develop new knowledge and chemical processes, allowing the rational design of functional materials with applications in catalysis, energy storage, and chemical separations. Expected outcomes include more energy efficie ....Manufacturing Nanostructured Metallic Materials via 3D Printed Polymers. This project aims to develop additive manufacturing processes capable of rapidly producing nanostructured polymer and metallic materials with tuneable physical and chemical properties. This project expects to develop new knowledge and chemical processes, allowing the rational design of functional materials with applications in catalysis, energy storage, and chemical separations. Expected outcomes include more energy efficient and environmentally benign methods for functional materials synthesis, and increased understanding of structure-property-performance relationships in nanostructured materials. This should provide benefits to Australia by providing cost-effective routes for materials used in energy, health, and water.Read moreRead less
Sustainable Reversible Polymerisation. This project aims to address the problem of the current lack of efficient chemical recyclability of polymers. For the majority of polymers, no methods exist so far that are scalable and economic at the same time. To reach this aim, we will utilise a mixture of clever chemical concepts with continuous flow engineering. This project expects to generate new knowledge in the area of depolymerisation and chemical recycling methods. The expected outcome of this p ....Sustainable Reversible Polymerisation. This project aims to address the problem of the current lack of efficient chemical recyclability of polymers. For the majority of polymers, no methods exist so far that are scalable and economic at the same time. To reach this aim, we will utilise a mixture of clever chemical concepts with continuous flow engineering. This project expects to generate new knowledge in the area of depolymerisation and chemical recycling methods. The expected outcome of this project is a scalable process and its practical demonstration for full chemical recycling of various polymers used in everyday applications. This will provide a benefit to society as it allows to tackle plastic pollution problems, and creates avenues to green methods in plastic recycling.
Read moreRead less
Sulfur-based materials for infrared optics and thermal imaging. This project aims to investigate novel sulfur polymers for use in infrared optics and thermal imaging. Current thermal imaging lenses are made in energy-intensive processes from expensive semiconductors and toxic chalcogenide glasses. In contrast, highly abundant elemental sulfur can be converted into polymers that are highly transparent to mid- and long-wave infrared light, providing a promising low-cost alternative. In developing ....Sulfur-based materials for infrared optics and thermal imaging. This project aims to investigate novel sulfur polymers for use in infrared optics and thermal imaging. Current thermal imaging lenses are made in energy-intensive processes from expensive semiconductors and toxic chalcogenide glasses. In contrast, highly abundant elemental sulfur can be converted into polymers that are highly transparent to mid- and long-wave infrared light, providing a promising low-cost alternative. In developing this technology, expected outcomes include novel methods to manufacture polymers from low-cost sulfur and their use as lenses for thermal imaging. Significant benefits are expected, such as access to low-cost, recyclable materials for thermal imaging required in surveillance, diagnostics, and spectroscopy.Read moreRead less
Mid-Career Industry Fellowships - Grant ID: IM230100090
Funder
Australian Research Council
Funding Amount
$1,053,046.00
Summary
Multi material 3D Printing. This project aims to further develop a new 3D printing technique commercialised by an Australian start-up company. Current electronics manufacturing is extremely capital intensive, slow and restrictive in 3D design. The 3D printing method proposed in this application will disrupt the current advanced manufacturing eco system; creating unique methods to unlock advances in diverse markets for example, photovoltaics, printed circuit boards and sensors. The expected outco ....Multi material 3D Printing. This project aims to further develop a new 3D printing technique commercialised by an Australian start-up company. Current electronics manufacturing is extremely capital intensive, slow and restrictive in 3D design. The 3D printing method proposed in this application will disrupt the current advanced manufacturing eco system; creating unique methods to unlock advances in diverse markets for example, photovoltaics, printed circuit boards and sensors. The expected outcomes of this project are to create new commercial opportunities for the next generation of 3D printed electronics. This will provide significant benefits, creating unique capability to manufacture devices in 3D - faster, cheaper and with reduced reliance on global supply chains.Read moreRead less
An in-built depolymerisation solution for polyethylene waste. This project aims to design enzymes that can be embedded into polyethylene, and later activated by the elevated temperatures of a compost heap, to depolymerise the plastic to small molecules. There are no good options available for the controlled decomposition of polyethylene waste at present, and instead researchers have focussed on solutions that rely on modifications to the underlying chemistry of the backbone and or collection to ....An in-built depolymerisation solution for polyethylene waste. This project aims to design enzymes that can be embedded into polyethylene, and later activated by the elevated temperatures of a compost heap, to depolymerise the plastic to small molecules. There are no good options available for the controlled decomposition of polyethylene waste at present, and instead researchers have focussed on solutions that rely on modifications to the underlying chemistry of the backbone and or collection to a central facility. Our approach would result in an in-built decomposition that does not require collection and recycling in a central facility. Since it is based on a depolymerisation mechanism it does not result in the production of harmful, partially disintegrated microplastics.Read moreRead less
A platform technology for developing mesoporous polymer particles. This project aims to apply polymerisation-induced self-assembly process to develop triggerable mesoporous polymer particles as advanced functional materials for various applications. By combining this scalable process and automated synthesis technique, mesoporous polymer particles that can disassemble in response to external triggers, such as light, redox conditions and enzymes, will be developed. The knowledge gained from this r ....A platform technology for developing mesoporous polymer particles. This project aims to apply polymerisation-induced self-assembly process to develop triggerable mesoporous polymer particles as advanced functional materials for various applications. By combining this scalable process and automated synthesis technique, mesoporous polymer particles that can disassemble in response to external triggers, such as light, redox conditions and enzymes, will be developed. The knowledge gained from this research will allow researchers to fully understand the formation and evolution mechanism of inverse bicontinuous structures observed in nature and produced in synthetic labs. Importantly, the applications of these novel stimuli-responsive particles as nano-carriers and templating scaffolds will be investigated.Read moreRead less