Experimental and theoretical analysis of gas leakage rate through composite landfill covers due to geomembrane defects. The Australian Greenhouse Office indicated that waste emissions contributed 3.1% of net national emissions in 2001 with methane emissions from landfills accounting for 92% of total methane emissions from the waste sector, despite an increase in methane recovered from solid waste. It pointed out that the recent changes in waste management practices did not have an impact on repo ....Experimental and theoretical analysis of gas leakage rate through composite landfill covers due to geomembrane defects. The Australian Greenhouse Office indicated that waste emissions contributed 3.1% of net national emissions in 2001 with methane emissions from landfills accounting for 92% of total methane emissions from the waste sector, despite an increase in methane recovered from solid waste. It pointed out that the recent changes in waste management practices did not have an impact on reported methane emission levels and there is need to undertake a range of activities to reduce emissions from waste management activities. This project will address specifically the above issue by providing a new method of analysis to predict gas leakage rate and allow engineers to propose solutions to mitigate gas escapes. Read moreRead less
Advanced Nanocomposites for Enhanced Containment of Hyper-Saline Leachate. This research project seeks to apply nanotechnology approaches to develop tailored materials that are green and cost-effective, which minimise groundwater contamination by hyper-saline industrial leachates and process waters. Australian industries will benefit from lower costs associated with storage, processing and reclamation of process waters, as well as from reduced environmental fines levied by the Environmental Prot ....Advanced Nanocomposites for Enhanced Containment of Hyper-Saline Leachate. This research project seeks to apply nanotechnology approaches to develop tailored materials that are green and cost-effective, which minimise groundwater contamination by hyper-saline industrial leachates and process waters. Australian industries will benefit from lower costs associated with storage, processing and reclamation of process waters, as well as from reduced environmental fines levied by the Environmental Protection Agency due to significantly reduced barrier failure and groundwater contaminations. Australian businesses involved in manufacture, design and construction of environmental barrier systems will have access to new materials and improved technology.Read moreRead less
Multi-scale modeling of transport through deformable porous materials. Understanding solute transport through porous materials is essential because it provides a technical basis for answering many important questions in society today-how can humans avoid 'brittle bones', how to design durable infrastructure, how to safely store wastes (e.g. hazardous and municipal). Solution of each of these problems requires innovation in model development, new method of analysis, and insightful interpretation ....Multi-scale modeling of transport through deformable porous materials. Understanding solute transport through porous materials is essential because it provides a technical basis for answering many important questions in society today-how can humans avoid 'brittle bones', how to design durable infrastructure, how to safely store wastes (e.g. hazardous and municipal). Solution of each of these problems requires innovation in model development, new method of analysis, and insightful interpretation of results. While theoretical developments of this project are general, in the sense that they are not restricted to particular engineering disciplines, the four chosen applications closely align with two major research priorities namely An Environmental Sustainable Australia and Promoting and Maintaining Good Health.Read moreRead less
Fundamental theoretical investigation of the chemomechanical properties of clays. Australia faces significant environmental challenges, one of the most important being soil degradation. The aim of this project is to develop new and state-of-the art mathematical models describing the behaviour of clays in soils. This proposal addresses five fundamental problems in clay soil behaviour that have so far remained unanswered. The primary outcomes of this project will be new theoretical insights into t ....Fundamental theoretical investigation of the chemomechanical properties of clays. Australia faces significant environmental challenges, one of the most important being soil degradation. The aim of this project is to develop new and state-of-the art mathematical models describing the behaviour of clays in soils. This proposal addresses five fundamental problems in clay soil behaviour that have so far remained unanswered. The primary outcomes of this project will be new theoretical insights into the chemomechanical properties of clay soils, so providing the understanding required to intelligently engineer and manage our natural and built environments.Read moreRead less
Development of Leakage Resistant Well-Cements for Geo-Sequestration of Carbon Dioxide Application using Alkali Activated Slag and Geopolymer Cements. The biggest threat facing life now is climate change due to carbon dioxide (CO2) emissions. Extreme weathers are increasing in frequency and intensity, as evidenced by recent bushfires, and it is predicted to get worse unless carbon mitigation strategies are quickly implemented. Geo-sequestration is the technology of capturing and storing of the CO ....Development of Leakage Resistant Well-Cements for Geo-Sequestration of Carbon Dioxide Application using Alkali Activated Slag and Geopolymer Cements. The biggest threat facing life now is climate change due to carbon dioxide (CO2) emissions. Extreme weathers are increasing in frequency and intensity, as evidenced by recent bushfires, and it is predicted to get worse unless carbon mitigation strategies are quickly implemented. Geo-sequestration is the technology of capturing and storing of the CO2 deep below ground for long time (>1000 years). It offers the best hope for large reductions of CO2 emissions. However, CO2-brine stored under pressure is acidic and has the risk of leaking in the long term by dissolving the cement used to seal the pipe wells. This project will develop alternative novel cements which are acid resistant and will not allow CO2 to leak through the sealed wells.Read moreRead less
The response of beams subjected to axial load and lateral soil movements. Beams (piles, soil nails, and pipelines) are not only subjected to axial (vertical, axial and longitudinal)loading, but often withstand simultaneous lateral loading, due to either explicit structural loads, or due to loads induced by movement of the soils in which they are founded. Bridge piles adjacent to an approach embankment are one example. This project will provide experimental evidence to assist with the estimation ....The response of beams subjected to axial load and lateral soil movements. Beams (piles, soil nails, and pipelines) are not only subjected to axial (vertical, axial and longitudinal)loading, but often withstand simultaneous lateral loading, due to either explicit structural loads, or due to loads induced by movement of the soils in which they are founded. Bridge piles adjacent to an approach embankment are one example. This project will provide experimental evidence to assist with the estimation of capacity, axial and shear resistance, the validation of unified solutions for beams subjected to simultaneous lateral soil movements and axial loads. Such experimental evidence and analytical solutions are not currently available. The evidence will also assist with solving a contradictory, existing design principle, which will lead to an economic and efficient design approach.Read moreRead less
Modelling of shrinkage crack development in porous media. Australia has interesting land formations comprising various reactive soils and rock. The formation of cracking patterns due to material shrinkage during either drying or cooling has a significant influence on their origin and subsequent behaviour. The shrinkage cracks significantly affect the performance of buildings, roads and buried pipelines. The possibility of their formation is important in many engineering designs, ranging from ....Modelling of shrinkage crack development in porous media. Australia has interesting land formations comprising various reactive soils and rock. The formation of cracking patterns due to material shrinkage during either drying or cooling has a significant influence on their origin and subsequent behaviour. The shrinkage cracks significantly affect the performance of buildings, roads and buried pipelines. The possibility of their formation is important in many engineering designs, ranging from few millimetres thick material film to hundreds of metres long clay barriers used in hazardous waste landfills. Despite their wide-spread significance, quantitative methods to predict the crack formation and interpretation are not yet available, and this project will provide a solution to this problem. Read moreRead less
Seeing the discrete in a continuum: an integrated numerical-rheological-experimental approach towards high resolution micromechanical continuum models of granular media. Processes involving granular materials are complex and rarely reach more than 60% of the design capacity, due to inadequate understanding of granular rheology. The short term benefits of the proposed project are: improved insights on the rheology of granular media; experimentally validated micromechanical constitutive models ....Seeing the discrete in a continuum: an integrated numerical-rheological-experimental approach towards high resolution micromechanical continuum models of granular media. Processes involving granular materials are complex and rarely reach more than 60% of the design capacity, due to inadequate understanding of granular rheology. The short term benefits of the proposed project are: improved insights on the rheology of granular media; experimentally validated micromechanical constitutive models with unmatched predictive capabilities; modelling techniques in the analysis of multiscale processes, germane to the Science of Complex Materials. The long term benefits are models of the required reliability for computer-aided design, production and management of particulate systems. These simulation tools will enhance Australia's competitive edge in the multi-billion dollar particulate and geotechnical industries.Read moreRead less
Fundamental theoretical and experimental investigation of cartilage mechanics. Arthritis and chronic joint symptoms are one of the leading causes of disability in the community, yet a fundamental understanding of joint mechanics has yet to be realised. The aim of this project is to develop a new state-of-the-art mathematical model describing cartilage behaviour in humans. The model will explain how activities like walking maintain healthy cartilage by transferring growth factors through the tiss ....Fundamental theoretical and experimental investigation of cartilage mechanics. Arthritis and chronic joint symptoms are one of the leading causes of disability in the community, yet a fundamental understanding of joint mechanics has yet to be realised. The aim of this project is to develop a new state-of-the-art mathematical model describing cartilage behaviour in humans. The model will explain how activities like walking maintain healthy cartilage by transferring growth factors through the tissue, and quantitatively explain how wear is minimised in cartilage through weeping lubrication. This model will progress our understanding of cartilage mechanics in health and disease, and so help Australians age well and productively.Read moreRead less
Microstructure-Based Computational Homogenization of Geomaterials. This project seeks to establish a basis for virtual testing of materials. This type of non-destructive testing has numerous applications of obvious benefit to society and will contribute to the continued growth and development of a large number of industries in Australia and worldwide. The methods developed will allow for cheaper, faster, and more accurate testing of materials. The outcomes of the project can find direct applicat ....Microstructure-Based Computational Homogenization of Geomaterials. This project seeks to establish a basis for virtual testing of materials. This type of non-destructive testing has numerous applications of obvious benefit to society and will contribute to the continued growth and development of a large number of industries in Australia and worldwide. The methods developed will allow for cheaper, faster, and more accurate testing of materials. The outcomes of the project can find direct application in civil engineering as well as in environmental, mining and petroleum engineering which together make up a significant portion of the nation's industry.Read moreRead less