Linkage Infrastructure, Equipment And Facilities - Grant ID: LE110100126
Funder
Australian Research Council
Funding Amount
$150,000.00
Summary
An integrated kinetic measurement system enabling efficient solar energy conversion. This measurement facility will underpin advances in the fundamental understanding of new semiconducting materials for high efficiency light-driven energy conversion systems. The outcomes of the research at the facility will lead to significant economic and environmental benefits for many industries, such as low cost solar cells and water purifications.
Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful ....Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful until carbon dioxide poisoning can be prevented. This project expects to make these LT-SOFC cathode materials commercially viable, solving a problem for the widespread use of low temperature solid oxide fuel cells.Read moreRead less
Two-dimensional nanoporous structured high performance gas evolution electrocatalysts. This project aims to develop nano-catalysts with high catalytic activity and rapid gas detachment properties for efficient fuel gas production. Heterogeneous electrocatalytic gas evolution reactions are important for clean energy generation and storage technologies, but high overpotentials caused by slow gaseous products’ detachment from catalyst surface severely hinder their efficiencies. Expected outcomes in ....Two-dimensional nanoporous structured high performance gas evolution electrocatalysts. This project aims to develop nano-catalysts with high catalytic activity and rapid gas detachment properties for efficient fuel gas production. Heterogeneous electrocatalytic gas evolution reactions are important for clean energy generation and storage technologies, but high overpotentials caused by slow gaseous products’ detachment from catalyst surface severely hinder their efficiencies. Expected outcomes include insights into gas bubble formation and evolution during electrocatalysis, effective catalyst structures to mitigate negative effects of gas bubble formation, and improved catalytic efficiency of gas evolution reactions and develop high performance electrocatalysts for fuel gas production.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE170100137
Funder
Australian Research Council
Funding Amount
$358,275.00
Summary
Integrated thin film facility for catalysis and energy materials research. This project aims to establish thin film fabrication with catalytic/gas sorption characterisation needed for energy research. This project will overcome current limitations in advanced energy materials design via wet chemical methods. It will enable materials synthesis and characterisation toward thermal/photo/electro-catalytic, hydrogen storage, and battery technologies. The facility is expected to drive fundamental conc ....Integrated thin film facility for catalysis and energy materials research. This project aims to establish thin film fabrication with catalytic/gas sorption characterisation needed for energy research. This project will overcome current limitations in advanced energy materials design via wet chemical methods. It will enable materials synthesis and characterisation toward thermal/photo/electro-catalytic, hydrogen storage, and battery technologies. The facility is expected to drive fundamental concepts, and enable combinatorial search and new thin film technology. It is anticipated that this facility will increase Australia’s international competitiveness in the development of advanced energy materials.Read moreRead less
A defect mechanism for oxygen reduction reaction. This project aims to use defective carbon to replace expensive platinum as a catalyst for oxygen reduction reaction (ORR) in fuel cells. Defective carbons incorporating non-precious metals are better than platinum in terms of over-potential, current density and number of electron transfer. They reduce the overall fuel cell cost but their better stability and higher open voltage and power density promise huge commercial benefit. This project is ex ....A defect mechanism for oxygen reduction reaction. This project aims to use defective carbon to replace expensive platinum as a catalyst for oxygen reduction reaction (ORR) in fuel cells. Defective carbons incorporating non-precious metals are better than platinum in terms of over-potential, current density and number of electron transfer. They reduce the overall fuel cell cost but their better stability and higher open voltage and power density promise huge commercial benefit. This project is expected to be important for large-scale implementation of fuel cells.Read moreRead less
Fundamentals and practical applications of hierarchically-structured bulk materials. Structured bulk materials are very promosing for process intensification. By using structured bulk materials instead of fine particles, this project will have the opportunity to realise hydrogen or methane storage at very low pressure, and significantly speed up the production of alternative transport fuels from syn gas.
Metal-support interactions: single atoms Vs nanoclusters. This project aims to fundamentally understand the catalytic mechanism at an atomic level through metal-metal and metal-metal/support interactions. The optimised configuration of active sites for a specific reaction is consequently identified, providing the design principles of novel catalysts. The precisely control of synthesis for such active sites and assembly of the target active sites into a catalyst will deliver a completely new meth ....Metal-support interactions: single atoms Vs nanoclusters. This project aims to fundamentally understand the catalytic mechanism at an atomic level through metal-metal and metal-metal/support interactions. The optimised configuration of active sites for a specific reaction is consequently identified, providing the design principles of novel catalysts. The precisely control of synthesis for such active sites and assembly of the target active sites into a catalyst will deliver a completely new methodology for catalyst development. The expected outcomes from this project include new science and knowledge of Chemistry, new design philosophy and strategies for catalysts, and the highly efficient catalysts for electrocatalytic reactions, benefiting Australian renewable energy research and industry.Read moreRead less
A Novel Light-Weight Membrane Reactor for Converting Natural Gas to Syngas. Most of Australia’s natural gas reserves are located in the remote north-west shelf, many of which are small-scale and thus cannot be economically harnessed using conventional methods such as the pipeline transportation or gas liquefaction. In this project, novel light-weight membrane reactors will be designed for converting natural gas to syngas. By integrating advanced membrane and catalysis technologies, this projects ....A Novel Light-Weight Membrane Reactor for Converting Natural Gas to Syngas. Most of Australia’s natural gas reserves are located in the remote north-west shelf, many of which are small-scale and thus cannot be economically harnessed using conventional methods such as the pipeline transportation or gas liquefaction. In this project, novel light-weight membrane reactors will be designed for converting natural gas to syngas. By integrating advanced membrane and catalysis technologies, this projects aim to minimise reactor weight and operational costs, thus potentially making it possible to harness Australia’s remote and stranded gas reserves.Read moreRead less
A New Photocatalytic System for Solar-to-Chemical Energy Conversion. The expected outcomes of this program are a new class of photocatalyst systems for converting waste products into valuable chemicals using solar energy. Using advanced materials and photocatalysis, the project aims to develop a new class of bi-functional photoelectrochemical (PEC) systems for application in waste brine treatment and valuable chemical generation. The key concept lies in the innovative design of layered semicondu ....A New Photocatalytic System for Solar-to-Chemical Energy Conversion. The expected outcomes of this program are a new class of photocatalyst systems for converting waste products into valuable chemicals using solar energy. Using advanced materials and photocatalysis, the project aims to develop a new class of bi-functional photoelectrochemical (PEC) systems for application in waste brine treatment and valuable chemical generation. The key concept lies in the innovative design of layered semiconductors as efficient and stable photocatalysts and their integration into PEC reaction systems for simultaneous solar hydrogen and valuable chemicals (eg bromine) generation from brine. The project aims to advance fundamental understanding of the photocatalytic water-splitting concept to other waste product splitting.Read moreRead less
Capturing full-spectrum of solar energy using TiO2 ordered suprastructures. The project aims to develop a titanium dioxide (TiO2) semiconductor that can use full-spectrum solar energy. Solar-driven photocatalytic processes have important applications in water decontamination and energy production. Their effectiveness is dictated by the semiconductor’s absorbance and conversion of photoenergy to chemical energy. Being inexpensive, chemically and mechanically robust, TiO2 is the most promising mat ....Capturing full-spectrum of solar energy using TiO2 ordered suprastructures. The project aims to develop a titanium dioxide (TiO2) semiconductor that can use full-spectrum solar energy. Solar-driven photocatalytic processes have important applications in water decontamination and energy production. Their effectiveness is dictated by the semiconductor’s absorbance and conversion of photoenergy to chemical energy. Being inexpensive, chemically and mechanically robust, TiO2 is the most promising material for the semiconductor. However, unmodified TiO2 only absorbs ultraviolet light (5 per cent of solar energy). With current progress made in visible absorbance, this project aims to significantly improve TiO2’s absorbance in near infrared by doping with upconversion lanthanides and rendering colloidal crystal suprastructures that can trap light.Read moreRead less