Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful ....Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful until carbon dioxide poisoning can be prevented. This project expects to make these LT-SOFC cathode materials commercially viable, solving a problem for the widespread use of low temperature solid oxide fuel cells.Read moreRead less
Two-dimensional nanoporous structured high performance gas evolution electrocatalysts. This project aims to develop nano-catalysts with high catalytic activity and rapid gas detachment properties for efficient fuel gas production. Heterogeneous electrocatalytic gas evolution reactions are important for clean energy generation and storage technologies, but high overpotentials caused by slow gaseous products’ detachment from catalyst surface severely hinder their efficiencies. Expected outcomes in ....Two-dimensional nanoporous structured high performance gas evolution electrocatalysts. This project aims to develop nano-catalysts with high catalytic activity and rapid gas detachment properties for efficient fuel gas production. Heterogeneous electrocatalytic gas evolution reactions are important for clean energy generation and storage technologies, but high overpotentials caused by slow gaseous products’ detachment from catalyst surface severely hinder their efficiencies. Expected outcomes include insights into gas bubble formation and evolution during electrocatalysis, effective catalyst structures to mitigate negative effects of gas bubble formation, and improved catalytic efficiency of gas evolution reactions and develop high performance electrocatalysts for fuel gas production.Read moreRead less
A defect mechanism for oxygen reduction reaction. This project aims to use defective carbon to replace expensive platinum as a catalyst for oxygen reduction reaction (ORR) in fuel cells. Defective carbons incorporating non-precious metals are better than platinum in terms of over-potential, current density and number of electron transfer. They reduce the overall fuel cell cost but their better stability and higher open voltage and power density promise huge commercial benefit. This project is ex ....A defect mechanism for oxygen reduction reaction. This project aims to use defective carbon to replace expensive platinum as a catalyst for oxygen reduction reaction (ORR) in fuel cells. Defective carbons incorporating non-precious metals are better than platinum in terms of over-potential, current density and number of electron transfer. They reduce the overall fuel cell cost but their better stability and higher open voltage and power density promise huge commercial benefit. This project is expected to be important for large-scale implementation of fuel cells.Read moreRead less
EnzOnomy - an enzyme-based production pipeline for the bioeconomy. The sustainable production of high value chemicals (e.g. fuels, foods) from renewable materials is a cornerstone for the emerging global bioeconomy. We aim to harness the potential of protein engineering to develop a technology (EnzOnomy) to convert renewable raw material (e.g. sugar) into platform chemicals (e.g. isobutanol, a building block for jet fuels, fibers, plastics and antioxidants). Our multi-disciplinary and well estab ....EnzOnomy - an enzyme-based production pipeline for the bioeconomy. The sustainable production of high value chemicals (e.g. fuels, foods) from renewable materials is a cornerstone for the emerging global bioeconomy. We aim to harness the potential of protein engineering to develop a technology (EnzOnomy) to convert renewable raw material (e.g. sugar) into platform chemicals (e.g. isobutanol, a building block for jet fuels, fibers, plastics and antioxidants). Our multi-disciplinary and well established international team will link scientific progress to markets to enhance potential commercial impact in the bioeconomy. The project thus provides great benefit for our nation as it embeds Australia in technologies and global networks that will cement its leading position to safe-guard the future of our planet.
Read moreRead less
Metal-support interactions: single atoms Vs nanoclusters. This project aims to fundamentally understand the catalytic mechanism at an atomic level through metal-metal and metal-metal/support interactions. The optimised configuration of active sites for a specific reaction is consequently identified, providing the design principles of novel catalysts. The precisely control of synthesis for such active sites and assembly of the target active sites into a catalyst will deliver a completely new meth ....Metal-support interactions: single atoms Vs nanoclusters. This project aims to fundamentally understand the catalytic mechanism at an atomic level through metal-metal and metal-metal/support interactions. The optimised configuration of active sites for a specific reaction is consequently identified, providing the design principles of novel catalysts. The precisely control of synthesis for such active sites and assembly of the target active sites into a catalyst will deliver a completely new methodology for catalyst development. The expected outcomes from this project include new science and knowledge of Chemistry, new design philosophy and strategies for catalysts, and the highly efficient catalysts for electrocatalytic reactions, benefiting Australian renewable energy research and industry.Read moreRead less
High Performance Anode for Direct Ammonia Solid Oxide Fuel Cells. Solid oxygen fuel cells are a clean energy generation device with very high energy efficiency and if with hydrogen as fuel, the emission is zero. However, the utilisation of hydrogen is limited by on-board storage. Ammonia is a promising hydrogen carrier and can be directly fed to solid oxide fuel cells without fuel storage problem, and the products are just hydrogen and nitrogen. For direct ammonia solid oxide fuel cells, the key ....High Performance Anode for Direct Ammonia Solid Oxide Fuel Cells. Solid oxygen fuel cells are a clean energy generation device with very high energy efficiency and if with hydrogen as fuel, the emission is zero. However, the utilisation of hydrogen is limited by on-board storage. Ammonia is a promising hydrogen carrier and can be directly fed to solid oxide fuel cells without fuel storage problem, and the products are just hydrogen and nitrogen. For direct ammonia solid oxide fuel cells, the key challenge is the anode. This project aims to develop a high performance anode for direct ammonia solid oxide fuel cells with both high activity and high stability at low temperature (below 600 degree C), thus addressing a key issue to make the direct ammonia solid oxide fuel cells commercially viable.Read moreRead less
A Novel Light-Weight Membrane Reactor for Converting Natural Gas to Syngas. Most of Australia’s natural gas reserves are located in the remote north-west shelf, many of which are small-scale and thus cannot be economically harnessed using conventional methods such as the pipeline transportation or gas liquefaction. In this project, novel light-weight membrane reactors will be designed for converting natural gas to syngas. By integrating advanced membrane and catalysis technologies, this projects ....A Novel Light-Weight Membrane Reactor for Converting Natural Gas to Syngas. Most of Australia’s natural gas reserves are located in the remote north-west shelf, many of which are small-scale and thus cannot be economically harnessed using conventional methods such as the pipeline transportation or gas liquefaction. In this project, novel light-weight membrane reactors will be designed for converting natural gas to syngas. By integrating advanced membrane and catalysis technologies, this projects aim to minimise reactor weight and operational costs, thus potentially making it possible to harness Australia’s remote and stranded gas reserves.Read moreRead less
A New Photocatalytic System for Solar-to-Chemical Energy Conversion. The expected outcomes of this program are a new class of photocatalyst systems for converting waste products into valuable chemicals using solar energy. Using advanced materials and photocatalysis, the project aims to develop a new class of bi-functional photoelectrochemical (PEC) systems for application in waste brine treatment and valuable chemical generation. The key concept lies in the innovative design of layered semicondu ....A New Photocatalytic System for Solar-to-Chemical Energy Conversion. The expected outcomes of this program are a new class of photocatalyst systems for converting waste products into valuable chemicals using solar energy. Using advanced materials and photocatalysis, the project aims to develop a new class of bi-functional photoelectrochemical (PEC) systems for application in waste brine treatment and valuable chemical generation. The key concept lies in the innovative design of layered semiconductors as efficient and stable photocatalysts and their integration into PEC reaction systems for simultaneous solar hydrogen and valuable chemicals (eg bromine) generation from brine. The project aims to advance fundamental understanding of the photocatalytic water-splitting concept to other waste product splitting.Read moreRead less
Controllable Synthesis of Defects in Catalysts for Electrocatalysis . This project aims to address the most critical issue of electrocatalysis: identification of active sites for carbon-based metal free catalysts (CMFCs). Through the development of new methodologies, this proposal will, for the first time, controllably synthesise the vacancy defects that are the major active sites for CMFCs. The expected outcomes from this project include in-depth understanding of the fundamentals of electrocata ....Controllable Synthesis of Defects in Catalysts for Electrocatalysis . This project aims to address the most critical issue of electrocatalysis: identification of active sites for carbon-based metal free catalysts (CMFCs). Through the development of new methodologies, this proposal will, for the first time, controllably synthesise the vacancy defects that are the major active sites for CMFCs. The expected outcomes from this project include in-depth understanding of the fundamentals of electrocatalysis: the reactivity of active sites and the catalytic performance with the number of active sites; which will not only significantly advance knowledge but also achieve breakthrough technologies that greatly benefit to the society and economy both for Australia and worldwide.Read moreRead less
Advanced chemical recycling of mixed plastics for monomer recovery. This project aims to develop innovative catalytic routes to the chemical recycling of mixed plastics for recovery of their molecular building blocks. Plastic pollution poses a significant threat to the Australian ecosystem. Efficient recycling technologies are urgently needed as Australia only recycles ~4% of its 3.4 million tons of mixed waste plastics. This project expects to design highly efficient catalysts for the stepwise ....Advanced chemical recycling of mixed plastics for monomer recovery. This project aims to develop innovative catalytic routes to the chemical recycling of mixed plastics for recovery of their molecular building blocks. Plastic pollution poses a significant threat to the Australian ecosystem. Efficient recycling technologies are urgently needed as Australia only recycles ~4% of its 3.4 million tons of mixed waste plastics. This project expects to design highly efficient catalysts for the stepwise breakdown of mixed polyolefin plastics into monomers for the subsequent manufacturing of virgin plastics in a circular economy, and to elucidate fundamental underpinning reaction mechanisms. Outcomes will stimulate the Australian waste plastic recycling industry, and minimise plastic accumulation in the environment.Read moreRead less