Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0989068
Funder
Australian Research Council
Funding Amount
$637,120.00
Summary
Equipment for Metastable Induced Electron Spectroscopy: surface analysis with excellent surface sensitivity. One of the major research strengths of Australia is surface science as it is important for both fundamental and industry related research. In many cases it is crucial to investigate the outermost layer of a material or mineral. Metastable Induced Electron Spectroscopy is an ideal technique as it is sensitive exclusively to the outermost layer of a broad range of samples. The information g ....Equipment for Metastable Induced Electron Spectroscopy: surface analysis with excellent surface sensitivity. One of the major research strengths of Australia is surface science as it is important for both fundamental and industry related research. In many cases it is crucial to investigate the outermost layer of a material or mineral. Metastable Induced Electron Spectroscopy is an ideal technique as it is sensitive exclusively to the outermost layer of a broad range of samples. The information gained is not accessible by any other method. The proposed equipment will be the first of this type in Australia and will complement existing surface science facilities. The project will enhance Australia's position in surface science internationally and a large number of projects will benefit from access to the equipment.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE180100030
Funder
Australian Research Council
Funding Amount
$541,705.00
Summary
National facility for nanoscale characterisation of luminescent materials. The project aims to establish a national facility for nanoscale characterisation of advanced optoelectronic materials, including atomically-thin materials, luminescent nanocrystals, metamaterials, and plasmonic nanostructures. The combination of a highly focused electron beam, and novel light detection optics, will enable temperature-dependent, angle, polarisation and time-resolved luminescence analysis with unprecedented ....National facility for nanoscale characterisation of luminescent materials. The project aims to establish a national facility for nanoscale characterisation of advanced optoelectronic materials, including atomically-thin materials, luminescent nanocrystals, metamaterials, and plasmonic nanostructures. The combination of a highly focused electron beam, and novel light detection optics, will enable temperature-dependent, angle, polarisation and time-resolved luminescence analysis with unprecedented resolution. It is expected this will yield discoveries in nanoscale physics and materials science. It will create interdisciplinary collaborations by linking Australian scientists who use high-resolution multimodal characterisation methods to innovate and develop materials and device technologies.Read moreRead less
Quantification of airborne engineered nanoparticles: developing a scientific framework to inform their regulation and control. Despite the presence of airborne engineered nanoparticles in many commercial/research facilities, there are no established methods for their detection/characterisation. This work aims to develop a foundation for the quantitative assessment of airborne engineered nanoparticles, which is critical for controlling exposure and minimising health risks.
Special Research Initiatives - Grant ID: SR0354588
Funder
Australian Research Council
Funding Amount
$10,000.00
Summary
Integrated Nanoscale Biosystems Network (INBN). The INBN will integrate high-priority research, already identified by the ARC, in materials nanoscience and engineering with nanoscale biology. The INBN will provide the means to consolidate world-class multidisciplinary Australian research groups in existing Centres of Excellence, including several Federation Fellows, into a nanobiotechnology focus. The significant outcomes of INBN are the critical mass of outstanding researchers in the nanobiosci ....Integrated Nanoscale Biosystems Network (INBN). The INBN will integrate high-priority research, already identified by the ARC, in materials nanoscience and engineering with nanoscale biology. The INBN will provide the means to consolidate world-class multidisciplinary Australian research groups in existing Centres of Excellence, including several Federation Fellows, into a nanobiotechnology focus. The significant outcomes of INBN are the critical mass of outstanding researchers in the nanobiosciences, facilitation of innovative research to produce novel intellectual property and provision of pathways into collaborative research with international scientists and industry, and the training and development of the next generation scientists for this emerging discipline.
Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0453320
Funder
Australian Research Council
Funding Amount
$347,886.00
Summary
Advanced Spectroscopy for Nano-characterisation of Materials Chemistry and Properties. This application proposes to establish a cutting-edge spectroscopic facility which includes; electron energy-loss spectroscopy (EELS), energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), photoluminescence (PL) and micro-Raman spectroscopy. Each of the spectrometers to be installed has significantly higher sensitivity and resolution than any other facility available in Australia and is capable ....Advanced Spectroscopy for Nano-characterisation of Materials Chemistry and Properties. This application proposes to establish a cutting-edge spectroscopic facility which includes; electron energy-loss spectroscopy (EELS), energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), photoluminescence (PL) and micro-Raman spectroscopy. Each of the spectrometers to be installed has significantly higher sensitivity and resolution than any other facility available in Australia and is capable of full spectrum imaging. This new spectroscopic infrastructure will enable the knowledge-based development of new materials by allowing complete characterisation of structure-composition-property relationships at the nanometre level.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0560705
Funder
Australian Research Council
Funding Amount
$825,000.00
Summary
Advanced Deformation Simulation Laboratory. For Australia to maintain its position as a world leader in the science of metals processing it must have the capability for state-of-the-art physical simulation. The present proposal is for the purchase and installation of two leading edge simulation tools: a high rate/short inter-pass hot deformation simulator and a hot equal channel angular extrusion press. Advanced hot deformation simulation is required for the development and optimisation of "fast ....Advanced Deformation Simulation Laboratory. For Australia to maintain its position as a world leader in the science of metals processing it must have the capability for state-of-the-art physical simulation. The present proposal is for the purchase and installation of two leading edge simulation tools: a high rate/short inter-pass hot deformation simulator and a hot equal channel angular extrusion press. Advanced hot deformation simulation is required for the development and optimisation of "fast" industrial processes and for understanding the complex microstructural reactions associated with them. High temperature extrusion is required for the development of ultra-fine and nano-grained light metals.Read moreRead less
Electronically Conducting Nanofibres and Assemblies. With the use of new techniques that have just emerged in the last two years and are receiving rapidly growing interest throughout the world, this project will bring to Australia a new nanofabrication platform for making a variety of complex nanostructures. Fundamental researches on these complex nanostructures will greatly advance nanoscience. New nanotechnologies will be developed to address some world-wide challenging problems, e.g. energy ....Electronically Conducting Nanofibres and Assemblies. With the use of new techniques that have just emerged in the last two years and are receiving rapidly growing interest throughout the world, this project will bring to Australia a new nanofabrication platform for making a variety of complex nanostructures. Fundamental researches on these complex nanostructures will greatly advance nanoscience. New nanotechnologies will be developed to address some world-wide challenging problems, e.g. energy conversion and storage, chemical/biological sensing and other micro- and nanoelectronic devices. This project will bring both breakthrough science and frontier technologies for building and transforming Australian industries and help place Australia at the forefront of nanotechnology. Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE210100156
Funder
Australian Research Council
Funding Amount
$289,500.00
Summary
3D Two-Photon Nanoprinter for Advanced Multi-Functional Materials & Devices. The Nanoscribe Photonic Professional GT2 Two-Photon 3D Printer enables tailoring materials’ architecture at nanoscale. This results in unique optical, mechanical, electrical, chemical, biochemical, and acoustic properties enabling a wealth of cutting-edge research activities in variety of fields including mechanical/optical/electrical metamaterials, bioinspired hard/soft materials, biomaterials (e.g., structured cell-ti ....3D Two-Photon Nanoprinter for Advanced Multi-Functional Materials & Devices. The Nanoscribe Photonic Professional GT2 Two-Photon 3D Printer enables tailoring materials’ architecture at nanoscale. This results in unique optical, mechanical, electrical, chemical, biochemical, and acoustic properties enabling a wealth of cutting-edge research activities in variety of fields including mechanical/optical/electrical metamaterials, bioinspired hard/soft materials, biomaterials (e.g., structured cell-tissue interfaces), biomedical devices (implantable devices and drug-delivery systems), nanofluidics, and photonic crystals. In each of these fields, we will use GT2 to print variety of polymers, hydrogels, metals and ceramics, for example by printing polymer-derived nanoceramics that will be simultaneously strong and tough.Read moreRead less
Industrial Transformation Research Hubs - Grant ID: IH210100040
Funder
Australian Research Council
Funding Amount
$5,000,000.00
Summary
ARC RESEARCH HUB FOR CONNECTED SENSORS FOR HEALTH. This Hub aims to develop, manufacture and deploy high-tech, cyber-secure, medically-certified IoT sensors to global health markets by integrating disparate Australian capabilities into a productive end-to-end value chain. This Hub expects to position Australia at the forefront of connected health by integrating sensor science with cyber-secure data analytics, regulatory approval and certified manufacturing capabilities. Expected outcomes of this ....ARC RESEARCH HUB FOR CONNECTED SENSORS FOR HEALTH. This Hub aims to develop, manufacture and deploy high-tech, cyber-secure, medically-certified IoT sensors to global health markets by integrating disparate Australian capabilities into a productive end-to-end value chain. This Hub expects to position Australia at the forefront of connected health by integrating sensor science with cyber-secure data analytics, regulatory approval and certified manufacturing capabilities. Expected outcomes of this Hub include advanced manufacturing capacity for connected sensors, strategic partnerships and commercialisation skills to translate sensors research to create economic benefits such as jobs and locally-made products for domestic and export markets, as well as improving the health of Australians.Read moreRead less