Linkage Infrastructure, Equipment And Facilities - Grant ID: LE180100030
Funder
Australian Research Council
Funding Amount
$541,705.00
Summary
National facility for nanoscale characterisation of luminescent materials. The project aims to establish a national facility for nanoscale characterisation of advanced optoelectronic materials, including atomically-thin materials, luminescent nanocrystals, metamaterials, and plasmonic nanostructures. The combination of a highly focused electron beam, and novel light detection optics, will enable temperature-dependent, angle, polarisation and time-resolved luminescence analysis with unprecedented ....National facility for nanoscale characterisation of luminescent materials. The project aims to establish a national facility for nanoscale characterisation of advanced optoelectronic materials, including atomically-thin materials, luminescent nanocrystals, metamaterials, and plasmonic nanostructures. The combination of a highly focused electron beam, and novel light detection optics, will enable temperature-dependent, angle, polarisation and time-resolved luminescence analysis with unprecedented resolution. It is expected this will yield discoveries in nanoscale physics and materials science. It will create interdisciplinary collaborations by linking Australian scientists who use high-resolution multimodal characterisation methods to innovate and develop materials and device technologies.Read moreRead less
Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful ....Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful until carbon dioxide poisoning can be prevented. This project expects to make these LT-SOFC cathode materials commercially viable, solving a problem for the widespread use of low temperature solid oxide fuel cells.Read moreRead less
Quantification of airborne engineered nanoparticles: developing a scientific framework to inform their regulation and control. Despite the presence of airborne engineered nanoparticles in many commercial/research facilities, there are no established methods for their detection/characterisation. This work aims to develop a foundation for the quantitative assessment of airborne engineered nanoparticles, which is critical for controlling exposure and minimising health risks.
Discovery Early Career Researcher Award - Grant ID: DE240100839
Funder
Australian Research Council
Funding Amount
$442,162.00
Summary
Nanoarchitectured platform technology for molecular profiling of exosomes. The aim of this project is to develop a set of cutting-edge nanotechnologies and a nanofabrication strategy to create a highly sensitive platform technology for exosome and exosomal miRNA analysis. This project aims to generate new knowledge in mesoporus nanomaterials and transudcer as well as exosome chemistry by developing nanostructure-based platform technology (device) for automated and rapid analysis. This project's ....Nanoarchitectured platform technology for molecular profiling of exosomes. The aim of this project is to develop a set of cutting-edge nanotechnologies and a nanofabrication strategy to create a highly sensitive platform technology for exosome and exosomal miRNA analysis. This project aims to generate new knowledge in mesoporus nanomaterials and transudcer as well as exosome chemistry by developing nanostructure-based platform technology (device) for automated and rapid analysis. This project's findings are expected to provide Australia with cutting-edge expertise for developing a next-generation platform technology for analysing exosomes and other relevant biomolecules, with the potential to deliver valuable intellectual property of commercial interest and economic benefit through technological advancements.Read moreRead less
Engineering layered double hydroxide nanoparticles toward an efficient targeted clinical delivery system. This project will develop a more effective drug delivery system using clay nanoparticles and biofriendly serum proteins. Outcomes from this project will provide a tremendous opportunity for potent therapies of cancers, vasculature and neuronal diseases, and place Australia at the forefront of nanotechnology drug delivery research.
Detection, characteristics and dynamics of airborne engineered nanoparticles for human exposure assessment. Recent advances in nanotechnology have led to questions about the safety of airborne engineered nanoparticles in commercial and research facilities. This project aims to develop an understanding of nanoparticle emission and behaviour in the air, which is needed to control workplace exposure to these particles and minimise the risk to human health.
Development of High Performance Nanostructured (Bi, Sb)2Te3 Nanomaterials. The direct energy conversion between heat and electricity, based on thermoelectric effects without moving parts, has been considered as a green and sustainable solution to the global energy dilemma. This project aims to develop novel band-engineered (Bi, Sb)2Te3 nanomaterials for high-efficiency energy conversion using novel microwave assisted wet chemistry approach, coupled with nanostructure and band engineering strateg ....Development of High Performance Nanostructured (Bi, Sb)2Te3 Nanomaterials. The direct energy conversion between heat and electricity, based on thermoelectric effects without moving parts, has been considered as a green and sustainable solution to the global energy dilemma. This project aims to develop novel band-engineered (Bi, Sb)2Te3 nanomaterials for high-efficiency energy conversion using novel microwave assisted wet chemistry approach, coupled with nanostructure and band engineering strategies. The key breakthrough is to design high performance (Bi, Sb)2Te3 thermoelectrics for satisfying the high efficiency solid-state devices. The expected outcomes will lead to an innovative technology that waste heat recovery and refrigeration, which will place Australia at the forefront of practical energy technologies.Read moreRead less
A New Platform of Bio-inspired Nanoparticles for Enhanced Cellular Delivery. Delivery of various molecules into cells is crucial in modern medicine. Compared to viral vectors, non-viral vectors are safer delivery vehicles, but their delivery efficiency must be improved before they can be broadly used. Inspired by the surface topography of viruses with high infectivity, this project aims to provide a fundamental understanding of the impact of surface roughness on cellular delivery efficiency; and ....A New Platform of Bio-inspired Nanoparticles for Enhanced Cellular Delivery. Delivery of various molecules into cells is crucial in modern medicine. Compared to viral vectors, non-viral vectors are safer delivery vehicles, but their delivery efficiency must be improved before they can be broadly used. Inspired by the surface topography of viruses with high infectivity, this project aims to provide a fundamental understanding of the impact of surface roughness on cellular delivery efficiency; and to use this knowledge in the designed synthesis of a new family of bio-inspired non-viral nanoparticles with both safety and high cellular delivery efficiency. The new and high performance nano-carriers will become a platform technology with broad bio-applications in gene therapy, cancer therapy and bio-imaging.Read moreRead less
Towards Robust Hydrogen Electrode for High-Rate Alkaline Electrolysis. This project aims to develop robust, efficient porous hybrid hydrogen electrodes for electrochemical hydrogen production in anion exchange membrane water electrolyser. anion exchange membrane water electrolyser powered by renewable energy has emerged as a key avenue towards clean hydrogen with zero carbon footprint. However, the electrochemical turnover on the hydrogen electrode has been significantly hindered by the sluggish ....Towards Robust Hydrogen Electrode for High-Rate Alkaline Electrolysis. This project aims to develop robust, efficient porous hybrid hydrogen electrodes for electrochemical hydrogen production in anion exchange membrane water electrolyser. anion exchange membrane water electrolyser powered by renewable energy has emerged as a key avenue towards clean hydrogen with zero carbon footprint. However, the electrochemical turnover on the hydrogen electrode has been significantly hindered by the sluggish reaction kinetics in alkaline solution. The project is expected to generate cost-effective hydrogen electrodes for hydrogen electrolyzers, advanced knowledge in the electrode material engineering, electrochemical reaction mechanistic insights, and eventually promoted development of disruptive electrolysis technology.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE210100156
Funder
Australian Research Council
Funding Amount
$289,500.00
Summary
3D Two-Photon Nanoprinter for Advanced Multi-Functional Materials & Devices. The Nanoscribe Photonic Professional GT2 Two-Photon 3D Printer enables tailoring materials’ architecture at nanoscale. This results in unique optical, mechanical, electrical, chemical, biochemical, and acoustic properties enabling a wealth of cutting-edge research activities in variety of fields including mechanical/optical/electrical metamaterials, bioinspired hard/soft materials, biomaterials (e.g., structured cell-ti ....3D Two-Photon Nanoprinter for Advanced Multi-Functional Materials & Devices. The Nanoscribe Photonic Professional GT2 Two-Photon 3D Printer enables tailoring materials’ architecture at nanoscale. This results in unique optical, mechanical, electrical, chemical, biochemical, and acoustic properties enabling a wealth of cutting-edge research activities in variety of fields including mechanical/optical/electrical metamaterials, bioinspired hard/soft materials, biomaterials (e.g., structured cell-tissue interfaces), biomedical devices (implantable devices and drug-delivery systems), nanofluidics, and photonic crystals. In each of these fields, we will use GT2 to print variety of polymers, hydrogels, metals and ceramics, for example by printing polymer-derived nanoceramics that will be simultaneously strong and tough.Read moreRead less