ORCID Profile
0000-0002-7291-9281
Current Organisation
University of Queensland
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
In Research Link Australia (RLA), "Research Topics" refer to ANZSRC FOR and SEO codes. These topics are either sourced from ANZSRC FOR and SEO codes listed in researchers' related grants or generated by a large language model (LLM) based on their publications.
Electronic and magnetic properties of condensed matter; superconductivity | Condensed Matter Physics | Manufacturing Processes and Technologies (excl. Textiles) | Materials Engineering | Electronic and Magnetic Properties of Condensed Matter; Superconductivity | Materials engineering | Condensed matter physics | Synthesis of Materials | Sensor Technology (Chemical aspects) | Powder and Particle Technology | Mechanical Engineering not elsewhere classified | Materials Engineering not elsewhere classified | Nanomaterials | Manufacturing processes and technologies (excl. textiles) | Functional materials | Nanomaterials | Electrical and Electronic Engineering not elsewhere classified | Energy Generation, Conversion and Storage Engineering | Nanotechnology | Composite and Hybrid Materials | Nuclear Physics
Expanding Knowledge in Engineering | Energy Transmission and Distribution (excl. Hydrogen) | Management of Greenhouse Gas Emissions from Mineral Resource Activities | Wind Energy | Expanding Knowledge in Technology | Nuclear Energy | Environmentally Sustainable Energy Activities not elsewhere classified | Machined Metal Products | Diagnostic Methods | Ceramics |
Publisher: Royal Society of Chemistry (RSC)
Date: 2016
DOI: 10.1039/C6MH00165C
Abstract: This review summarizes the synthesis of conductive polymers with different chemical structures in various ways and also addresses their widespread recent development for energy storage system applications.
Publisher: Royal Society of Chemistry (RSC)
Date: 2016
DOI: 10.1039/C6RA23431C
Abstract: The crosslinked PS- b -P4VP/PTyr materials possesses superior adsorbed mercur since mercury ions tend to bind to the pyridyl rings of P4VP and the amido groups of PTyr through ionic dipole interactions.
Publisher: Elsevier BV
Date: 03-2014
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 06-2013
Publisher: Wiley
Date: 10-04-2019
Abstract: Metal-organic framework (MOF)-derived nanoporous carbon materials have attracted significant interest due to their advantages of controllable porosity, good thermal/chemical stability, high electrical conductivity, catalytic activity, easy modification with other elements and materials, etc. Thus, MOF-derived carbons have been used in numerous applications, such as environmental remediations, energy storage systems (i.e. batteries, supercapacitors), and catalysts. To date, many strategies have been developed to enhance the properties and performance of MOF-derived carbons. Herein, we introduce and summarize recent important approaches for advanced MOF-derived carbon structures with a focus on precursor control, heteroatom doping, shape/orientation control, and hybridization with other functional materials.
Publisher: Wiley
Date: 24-08-2016
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7NR07267H
Abstract: Mesoporous hollow carbon spheres with Pt nanoparticles (NPs) loaded on their inner walls (Pt@HC-meso) have been designed and prepared through a dual-templating method.
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7CC04789D
Abstract: A nonenzymatic, lification-free, and sensitive method for microRNA detection is reported using Au@NPFe 2 O 3 NC nanocubes.
Publisher: Elsevier BV
Date: 2015
Publisher: Springer Science and Business Media LLC
Date: 28-12-2012
Publisher: Wiley
Date: 04-02-2019
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C9TB00989B
Abstract: Next-generation nanozyme based biosensing: mesoporous nanocrystalline α- or γ-iron oxide?
Publisher: Wiley
Date: 05-06-2017
Abstract: Although multilayer films have been extensively reported, most compositions have been limited to non-catalytically active materials (e.g. polymers, proteins, lipids, or nucleic acids). Herein, we report the preparation of binder-free multilayer metallic mesoporous films with sufficient accessibility for high electrocatalytic activity by using a programmed electrochemical strategy. By precisely tuning the deposition potential and duration, multilayer mesoporous architectures consisting of alternating mesoporous Pd layers and mesoporous PdPt layers with controlled layer thicknesses can be synthesized within a single electrolyte, containing polymeric micelles as soft templates. This novel architecture, combining the advantages of bimetallic alloys, multilayer architectures, and mesoporous structures, exhibits high electrocatalytic activity for both the methanol oxidation reaction (MOR) and the ethanol oxidation reaction (EOR).
Publisher: IOP Publishing
Date: 07-09-2018
Publisher: The Chemical Society of Japan
Date: 15-04-2019
Publisher: AIP Publishing
Date: 28-01-2008
DOI: 10.1063/1.2838756
Abstract: In this work, we report on significantly enhanced critical current density (Jc) in MgB2 superconductor that was easily obtained by doping with a hydrocarbon, highly active pyrene (C16H10), and using a sintering temperature as low as ∼600°C. The processing advantages of the C16H10 additive include production of a highly active carbon (C) source, an increased level of disorder, and the introduction of small grain size, resulting in enhancement of Jc.
Publisher: The Chemical Society of Japan
Date: 15-09-2018
Publisher: Wiley
Date: 04-07-2018
Publisher: Wiley
Date: 28-12-2018
Abstract: Exosomes are nanoscale (≈30-150 nm) extracellular vesicles of endocytic origin that are shed by most types of cells and circulate in bodily fluids. Exosomes carry a specific composition of proteins, lipids, RNA, and DNA and can work as cargo to transfer this information to recipient cells. Recent studies on exosomes have shown that they play an important role in various biological processes, such as intercellular signaling, coagulation, inflammation, and cellular homeostasis. These functional roles are attributed to their ability to transfer RNA, proteins, enzymes, and lipids, thereby affecting the physiological and pathological conditions in various diseases, including cancer and neurodegenerative, infectious, and autoimmune diseases (e.g., cancer initiation, progression, and metastasis). Due to these unique characteristics, exosomes are considered promising biomarkers for the diagnosis and prognosis of various diseases via noninvasive or minimally invasive procedures. Over the last decade, a plethora of methodologies have been developed for analyzing disease-specific exosomes using optical and nonoptical tools. Here, the major biological functions, significance, and potential role of exosomes as biomarkers and therapeutics are discussed. Furthermore, an overview of the most commonly used techniques for exosome analysis, highlighting the major technical challenges and limitations of existing techniques, is presented.
Publisher: Royal Society of Chemistry (RSC)
Date: 2020
DOI: 10.1039/D0AN01096K
Abstract: A nanostructured mesoporous gold electrode is demonstrated to detect the phosphorylated protein over non-phosphorylated in cancer using electrochemical signal lification through differential pulse voltammetry in the presence of the [Fe(CN) 6 ] 3−/4− .
Publisher: Elsevier BV
Date: 05-2019
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7TA05091G
Abstract: Uniformly sized mesoporous palladium (Pd) nanoparticles supported on reduced graphene oxide (rGO) surfaces can be prepared by solution phase synthesis.
Publisher: Royal Society of Chemistry (RSC)
Date: 2016
DOI: 10.1039/C6CP05555A
Abstract: Nanoporous carbons prepared at various carbonization temperatures are tested using an aqueous electrolyte for supercapacitor applications.
Publisher: IOP Publishing
Date: 20-05-2013
Publisher: Wiley
Date: 17-01-2018
Publisher: IEEE
Date: 09-2015
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C8TB01132J
Abstract: Peroxidase-mimetic activity of mesoporous Fe 2 O 3 nanomaterials in global DNA methylation detection using naked eye and electrochemical readout.
Publisher: The Chemical Society of Japan
Date: 15-10-2017
Publisher: Elsevier BV
Date: 07-2018
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C9RA02001B
Abstract: AC/DC magnetic fields generated from a simple and cost effective electromagnetic system have been used for increased neurite outgrowth in SH-SY5Y cells without negatively affecting the cell viability.
Publisher: Royal Society of Chemistry (RSC)
Date: 2020
DOI: 10.1039/C9TC06114B
Abstract: Dual sintering induced performance variations in MgB 2 superconductors are studied in detail in relation to MRI applications.
Publisher: Elsevier BV
Date: 05-2014
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C8TC02300J
Abstract: The sintering process of Mg 11 B 2 s le using spherical Mg powder is different from the plate-like one (usual used).
Publisher: IOP Publishing
Date: 23-07-2007
Publisher: Wiley
Date: 10-01-2017
Abstract: The capture and storage of CO
Publisher: Springer Science and Business Media LLC
Date: 07-11-2017
Publisher: Wiley
Date: 30-08-2016
Publisher: Elsevier BV
Date: 09-2014
Publisher: Elsevier BV
Date: 2019
Publisher: Springer Science and Business Media LLC
Date: 12-08-2017
Publisher: Elsevier BV
Date: 2013
Publisher: Elsevier BV
Date: 11-2011
Publisher: AIP Publishing
Date: 15-01-2008
DOI: 10.1063/1.2832752
Abstract: MgB 2 s les were prepared by using 96% boron (B) powder with strong crystalline phase that had been ball milled for various times. We observed s les that contained ball-milled 96% B in comparison with one made from as-supplied commercial 96% B, with the results showing a significant enhancement in the high field critical current density (Jc) due to small grain size and better reactivity. Specifically, many grain boundaries for MgB2 could be acting as strong flux pinning centers. Based on Rowell connectivity analysis, when the ball-milling time increased, the connectivity factor, described as the active cross-sectional area fraction (AF), was decreased. This implies that the intergrain connectivity became worse. These properties could lead to poor Jc in low field. However, the pinning force strength, Jc1/2×B1/4, of s les using ball-milled 96% B is larger than that of the reference s le using commercial 96% B powder. These results accompany enhanced irreversibility (Hirr) and upper critical fields (Hc2).
Publisher: Royal Society of Chemistry (RSC)
Date: 2016
DOI: 10.1039/C6TC03288E
Abstract: Cu coating treatment can significantly enhance the formation of MgB 2 layer within internal Mg diffusion processed superconducting wire.
Publisher: IOP Publishing
Date: 27-05-2011
Publisher: Elsevier BV
Date: 03-2018
DOI: 10.1016/J.BIOS.2017.09.027
Abstract: A crucial issue in microRNA (miRNA) detection is the lack of sensitive method capable of detecting the low levels of miRNA in RNA s les. Herein, we present a sensitive and specific method for the electrocatalytic detection of miR-107 using gold-loaded nanoporous superparamagnetic iron oxide nanocubes (Au-NPFe
Publisher: Elsevier BV
Date: 07-2015
Publisher: IOP Publishing
Date: 23-12-2010
Publisher: American Chemical Society (ACS)
Date: 26-09-2017
DOI: 10.1021/ACS.ANALCHEM.7B02880
Abstract: The enzyme-mimicking activity of iron oxide based nanostructures has provided a significant advantage in developing advanced molecular sensors for biomedical and environmental applications. Herein, we introduce the horseradish peroxidase (HRP)-like activity of gold-loaded nanoporous ferric oxide nanocubes (Au-NPFe
Publisher: Elsevier BV
Date: 09-2018
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7TA03939E
Abstract: MOF-derived heteroatom (Ni and N)-doped Co/CoO/carbon hybrid with superior sodium storage performance for sodium-ion batteries have been fabricated from bimetallic Ni–Co-ZIF particles through annealing under argon atmosphere at 500 °C.
Publisher: Royal Society of Chemistry (RSC)
Date: 2016
DOI: 10.1039/C6TA01229A
Abstract: The recent development and perspectives of energy harvesting and storage devices including integration strategies are summarized and discussed.
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 06-2011
Publisher: Wiley
Date: 18-12-2018
Publisher: Wiley
Date: 06-08-2018
Publisher: Elsevier BV
Date: 06-2017
Publisher: Elsevier BV
Date: 11-2015
Publisher: Elsevier BV
Date: 08-2013
Publisher: IOP Publishing
Date: 05-10-2018
Publisher: Wiley
Date: 02-10-2018
Abstract: Porous carbons have attracted much attention as electrode materials for supercapacitors due to their enormous surface area, high electrical conductivity, excellent corrosion resistance, high temperature stability, and relatively low cost. The design of porous architectures is considered key for determining electrochemical performance. Pore size distribution, pore size, and pore connectivity strongly affect electrochemical performance. Various carbon materials with pore size ranging from micro- to macropores were extensively studied. Herein, various types of porous carbon-based and hybrid materials from different approaches and their electrochemical applications are summarized. Appropriate tuning of the pore size of carbon materials is essential for ensuring good transport of ions with different sizes throughout the electrolyte, so that the electrode materials can be fully utilized. Many carbon materials were produced from a series of carbonization and activation processes that possess controllable pore structures, including activated carbons, graphite, carbon nanotubes, carbon aerogels, and templated porous carbons. Templated carbon materials were prepared by various approaches, such as direct carbonization from carbon precursors and soft- and hard-template methods. To enhance the electrochemical performance of the electrode materials, heteroatoms, such as nitrogen, sulfur, and boron, were doped into porous carbons. In addition, to optimize the overall capacitance without destroying the stability and morphology of electrode materials, pseudocapacitive materials, such as transition-metal oxides, were introduced into the carbon frameworks. In this review, recent advances in the fabrication of nanoarchitectured porous carbons and metal oxides through various approaches for supercapacitor applications are summarized.
Publisher: Springer Science and Business Media LLC
Date: 26-09-2014
DOI: 10.1038/SREP06481
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C9CS00174C
Abstract: Synthesis, bio-functionalization, and multifunctional activities of superparamagnetic-nanostructures have been extensively reviewed with a particular emphasis on their uses in a range of disease-specific biomarker detection and associated challenges.
Publisher: IOP Publishing
Date: 07-2013
Publisher: Elsevier BV
Date: 10-2016
Publisher: Wiley
Date: 28-03-2017
Abstract: In the present work, 2.4 nm gold nanoparticles (Au NPs) are uniformly dispersed on mesoporous titania thin films which are structurally tuned by controlling the calcination temperature. The gold content of the catalyst is as high as 27.8 wt %. To our knowledge, such a high loading of Au NPs with good dispersity has not been reported until now. Furthermore, the reaction rate of the gold particles is enhanced by one order of magnitude when supported on mesoporous titania compared to non-porous titania. This significant improvement can be explained by an increase in the diffusivity of the substrate due to the presence of mesopores, the resistance to agglomeration, and improved oxygen activation.
Publisher: Wiley
Date: 02-12-2016
Abstract: Dendritic platinum nanoparticles (DPNs) have been synthesized from l-ascorbic acid and an hiphilic non-ionic surfactant (Brij-58) via a sonochemical method. The particle size and shape of the DPNs could be tuned by changing the reduction temperature, resulting in a uniform DPN with a size of 23 nm or 60 nm. The facets of DPNs have been studied by high-resolution transmission electron microscopy. The cytotoxicity of DPNs has been investigated using human embryonic kidney cells (HEK-293), and the biological adaptability exhibited by DPNs has opened a pathway to biomedical applications such as drug-delivery systems, photothermal treatment, and biosensors.
Publisher: IOP Publishing
Date: 19-08-2014
Publisher: The Chemical Society of Japan
Date: 15-10-2018
Publisher: Walter de Gruyter GmbH
Date: 27-06-2017
Abstract: Nanobiotechnology is an immensely potential invention, which is expected to bring about revolutionary changes in many aspects of essential human needs including medical treatments and foods. Although the technology has passed through its embryonic stage, its medical applications in preparing and delivering drugs to target cells of human bodies to cure incurable diseases are still under scientific scrutiny. A 2007 study suggests that Australia needs to have a review of its regulatory framework for nanotechnology by 2017. This article examines the current regulation of nanotechnology and its medical applications in Australia, and observes that it would be premature to impose any stringent regulation at this stage on medical experimentations. We are of the view that an excessively precautionary policy may hinder further research, which is critical to discovering the benefit and harm with certainty. Hence, in the greater interest of the facilitation of research and affirmation of benefits of this technology, we recommend that adopting a hybrid regulatory method composed of self-regulation and accommodating government regulation would be an appropriate policy approach to the regulation of nanobiotechnology. We also accept the need for a set of internationally harmonized policy principles to guide our actions in relation to this technology.
Publisher: Elsevier BV
Date: 08-2017
DOI: 10.1016/J.BIOS.2017.02.026
Abstract: DNA methylation is one of the key epigenetic modifications of DNA that results from the enzymatic addition of a methyl group at the fifth carbon of the cytosine base. It plays a crucial role in cellular development, genomic stability and gene expression. Aberrant DNA methylation is responsible for the pathogenesis of many diseases including cancers. Over the past several decades, many methodologies have been developed to detect DNA methylation. These methodologies range from classical molecular biology and optical approaches, such as bisulfite sequencing, microarrays, quantitative real-time PCR, colorimetry, Raman spectroscopy to the more recent electrochemical approaches. Among these, electrochemical approaches offer sensitive, simple, specific, rapid, and cost-effective analysis of DNA methylation. Additionally, electrochemical methods are highly amenable to miniaturization and possess the potential to be multiplexed. In recent years, several reviews have provided information on the detection strategies of DNA methylation. However, to date, there is no comprehensive evaluation of electrochemical DNA methylation detection strategies. Herein, we address the recent developments of electrochemical DNA methylation detection approaches. Furthermore, we highlight the major technical and biological challenges involved in these strategies and provide suggestions for the future direction of this important field.
Publisher: American Physical Society (APS)
Date: 15-06-2010
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 10-2014
Publisher: Wiley
Date: 12-12-2017
Abstract: Dendritic Pt nanospheres of 20 nm diameter are synthesized by using a highly concentrated surfactant assembly within the large-sized cage-type mesopores of mesoporous silica (LP-FDU-12). After diluting the surfactant solution with ethanol, the lower viscosity leads to an improved penetration inside the mesopores. After Pt deposition followed by template removal, the arrangement of the Pt nanospheres is a replication from that of the mesopores in the original LP-FDU-12 template. Although it is well known that ordered LLCs can form on flat substrates, the confined space inside the mesopores hinders surfactant self-organization. Therefore, the Pt nanospheres possess a dendritic porous structure over the entire area. The distortion observed in some nanospheres is attributed to the close proximity existing between neighboring cage-type mesopores. This new type of nanoporous metal with a hierarchical architecture holds potential to enhance substance diffusivity/accessibility for further improvement of catalytic activity.
Publisher: IOP Publishing
Date: 18-11-2016
Publisher: Springer Science and Business Media LLC
Date: 17-07-2015
DOI: 10.1007/S00249-015-1059-0
Abstract: Liposomal drug delivery systems (LDDSs) are promising tools used for the treatment of diseases where highly toxic pharmacological agents are administered. Currently, destabilising LDDSs by a specific stimulus at a target site remains a major challenge. The bacterial mechanosensitive channel of large conductance (MscL) presents an excellent candidate biomolecule that could be employed as a remotely controlled pore-forming nanovalve for triggered drug release from LDDSs. In this study, we developed superparamagnetic nanoparticles for activation of the MscL nanovalves by magnetic field. Synthesised CoFe2O4 nanoparticles with the radius less than 10 nm were labelled by SH groups for attachment to MscL. Activation of MscL by magnetic field with the nanoparticles attached was examined by the patch cl technique showing that the number of activated channels under r pressure increased upon application of the magnetic field. In addition, we have not observed any cytotoxicity of the nanoparticles in human cultured cells. Our study suggests the possibility of using magnetic nanoparticles as a specific trigger for activation of MscL nanovalves for drug release in LDDSs.
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7NR03006A
Abstract: An electrochemical and colorimetric method for detecting autoantibodies using gold-loaded nanoporous Fe 2 O 3 nanocubes as capture agents is reported for the first time.
Publisher: AIP Publishing
Date: 06-2010
DOI: 10.1063/1.3366710
Abstract: The transport and magnetic properties of 10 wt % malic acid and 5 wt % nanocarbon doped MgB2 have been studied by measuring the resistivity (ρ), critical current density (jc), connectivity factor (AF), irreversibility field (Hirr), and upper critical field (Hc2). The pinning mechanisms are studied in terms of the collective pinning model. It was found that both mean free path (δl) and critical temperature (δTc) pinning mechanisms coexist in both doped MgB2. For both the malic acid and nanocarbon doped s les, the temperature dependence of the crossover field, which separates the single vortex and the small bundle pinning regime, Bsb(T), shows that the δl pinning mechanism is dominant for temperatures up to t(T/Tc)=0.7 but the δTc pinning mechanism is dominant for t& .7. This tendency of coexistence of the δl and the δTc pinning mechanism is in strong contrast with the pure MgB2, in which the δTc pinning mechanism is dominant over a wide temperature range below Tc. It was also observed that the connectivity factor, active cross-sectional area fraction (AF), are 0.11 and 0.14 for the nanocarbon and the malic acid doped MgB2, respectively, indicating that there are still rooms for further improving jc performance.
Publisher: Wiley
Date: 21-08-2017
Abstract: We previously succeeded to prepare stable mesoporous Cu films on Au-coated conductive working electrodes by using polystyrene-b-poly(oxyethylene) (PS
Publisher: Elsevier BV
Date: 10-2014
Publisher: AIP Publishing
Date: 02-10-2006
DOI: 10.1063/1.2358947
Abstract: The effect of carbohydrate doping on lattice parameters, microstructure, Tc, Jc, Hirr, and Hc2 of MgB2 has been studied. In this work the authors used malic acid as an ex le of carbohydrates as an additive to MgB2. The advantages of carbohydrate doping include homogeneous mixing of precursor powders, avoidance of expansive nanoadditives, production of highly reactive C, and significant enhancement in Jc, Hirr, and Hc2 of MgB2, compared to undoped s les. The Jc for MgB2+30wt% C4H6O5 s le was increased by a factor of 21 at 5K and 8T without degradation of self-field Jc.
Publisher: Elsevier BV
Date: 05-2019
DOI: 10.1016/J.TIBS.2018.11.012
Abstract: With revolutionary advances in next-generation sequencing, the human transcriptome has been comprehensively interrogated. These discoveries have highlighted the emerging functional and regulatory roles of a large fraction of RNAs suggesting the potential they might hold as stable and minimally invasive disease biomarkers. Although a plethora of molecular-biology- and biosensor-based RNA-detection strategies have been developed, clinical application of most of these is yet to be realized. Multifunctional nanomaterials coupled with sensitive and robust electrochemical readouts may prove useful in these applications. Here, we summarize the major contributions of engineered nanomaterials-based electrochemical biosensing strategies for the analysis of miRNAs. With special emphasis on nanostructure-based detection, this review also chronicles the needs and challenges of miRNA detection and provides a future perspective on the presented strategies.
Publisher: IOP Publishing
Date: 14-12-2007
Publisher: Wiley
Date: 10-03-2017
Publisher: Wiley
Date: 04-09-2016
Abstract: The synthesis of a novel family of cyano-bridged trimetallic coordination polymers (CPs) with various compositions and shapes has been reported by changing the compositional ratios of Fe, Co, and Ni species in the reaction system. In order to efficiently control the nucleation rate and the crystal growth, trisodium citrate dihydrate plays an important role as a chelating agent. After the obtained cyano-bridged trimetallic CPs undergo thermal treatment in air at three different temperatures (250, 350, and 450 °C), nanoporous spinel metal oxides are successfully obtained. Interestingly, the obtained nanoporous metal oxides are composed of small crstalline grains, and the grains are oriented in the same direction, realizing pseudo-single crystals with nanopores. The resultant nanoporous spinel oxides feature interesting magnetic properties. Cyano-bridged multimetallic CPs with various sizes and shapes can provide a pathway toward functional nanoporous metal oxides that are not attainable from simple cyano-bridged CPs containing single metal ions.
Publisher: American Physical Society (APS)
Date: 03-11-2008
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C8SE00339D
Abstract: Glucose isomerization and selective production of 5-hydroxymethylfurfural in aqueous media, using combined catalysis of bone char and acidic ionic liquid.
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C6TC05086G
Abstract: Carbon doping fails to increase the critical current density of isotope Mg 11 B 2 superconductors.
Publisher: Elsevier BV
Date: 12-2015
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 06-2011
Publisher: IOP Publishing
Date: 27-03-2007
Publisher: American Chemical Society (ACS)
Date: 30-10-2017
Abstract: Metal-organic frameworks (MOFs) with high porosity and a regular porous structure have emerged as a promising electrode material for supercapacitors, but their poor electrical conductivity limits their utilization efficiency and capacitive performance. To increase the overall electrical conductivity as well as the efficiency of MOF particles, three-dimensional networked MOFs are developed via using preprepared conductive polypyrrole (PPy) tubes as the support for in situ growth of MOF particles. As a result, the highly conductive PPy tubes that run through the MOF particles not only increase the electron transfer between MOF particles and maintain the high effective porosity of the MOFs but also endow the MOFs with flexibility. Promoted by such elaborately designed MOF-PPy networks, the specific capacitance of MOF particles has been increased from 99.2 F g
Publisher: Springer Science and Business Media LLC
Date: 26-06-2023
DOI: 10.1007/S10649-023-10245-W
Abstract: Collaboration between Mathematicians and Mathematics Educators is crucial in advancing knowledge on the teaching and learning of Mathematics, particularly in advanced Mathematics pedagogy. However, there is a need for the type of collaborations where Mathematicians and Mathematics Educators can find common ground, and the synergy of their expertise results in new, hybrid meanings and understandings that can benefit practice. This paper aims to help researchers from these communities come together by presenting a novel methodology for collaborative inquiry and qualitative data analysis— dialogical inquiry —based on Mikhail Bakhtin’s theory of dialogism. In this framework, “truth” is conceived as never finalised but always coevolving through dialogue that involves participants with different “voices” and “languages”. We describe the three principles that underpin dialogical inquiry : motivation, power balance and a process for solving disagreements. These three principles interact together to create a space where critically productive dialogue allows for meanings to coevolve and new, hybrid understandings to emerge. We illustrate our operationalisation of these principles (i.e., the methods of dialogical inquiry ) in two areas: understanding solutions to linear ordinary differential equations and making meaning of the Bakhtinian concept of superaddressee. We reflect on our use of this methodology in Mathematics Education research and invite the readers to create their own dialogic spaces of collaboration.
Publisher: Wiley
Date: 17-08-2020
Publisher: IOP Publishing
Date: 08-06-2007
Publisher: American Scientific Publishers
Date: 04-2017
Abstract: We demonstrate a bio-inspired one-pot synthesis of carbon nanospheres with micro-porosity achieved from a promising carbon-rich source (Areca nut) using direct pyrolysis in nitrogen atmosphere at 550 °C in a tube-furnace without adding any catalysts. The resultant carbon spheres are highly monodispersed, uniformly shaped and possess good absorption behaviour (10.5 mg · g−1) for methylene blue (MB).
Publisher: Elsevier BV
Date: 2019
Publisher: Wiley
Date: 15-03-2019
Publisher: MDPI AG
Date: 29-09-2016
Publisher: Elsevier BV
Date: 11-2014
Publisher: Royal Society of Chemistry (RSC)
Date: 2023
DOI: 10.1039/D2TA06307G
Abstract: Enlargement of micropores in zeolitic imidazolate framework particles into mesopores is achieved via an ethylene glycol-assisted aqueous etching method. The etched carbon shows a higher specific capacitance than unetched one at high scan rates.
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7RA07810B
Abstract: We synthesize graphene sheet-like porous activated carbon (GPAC) with a high specific surface area by using Bougainvillea spectabilis as a precursor with the assistance of a facile and reliable chemical activation method.
Publisher: Elsevier BV
Date: 07-2015
Publisher: Elsevier BV
Date: 11-2016
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7TA07034A
Abstract: Mesostructured manganese phosphonate (MnP) with a uniform nanorod morphology has been prepared through an easy surfactant-mediated procedure.
Publisher: IOP Publishing
Date: 22-10-2018
Publisher: American Scientific Publishers
Date: 07-2019
Abstract: Hard- and soft-templating approaches are one of potential strategies for the fabrication of functional nanoporous carbon materials with desired morphologies and properties. Enormous efforts have been paid for understanding the synthetic mechanisms that strongly influence the materials design and applications. All of these investigations are crucial to encourage the application of hard- and soft-templating approaches for the precise synthesis of nanoporous carbon materials. In this review, we mainly summarize significant works employing different synthetic methods for making carbon materials with various pore sizes and functionalities. The content of the review article contains: (i) Hard-templating synthesis of microporous carbon from zeolites (ii) Hard-templating synthesis of mesoporous carbon from mesoporous silica (iii) Hard-templating synthesis of macroporous carbon and (iv) Soft-templating synthesis of mesoporous carbon. This review aims to provide a detailed glimpse of hard- and soft-templating approaches for future development of functional nanoporous carbon materials.
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C4TA06774F
Abstract: A new polyterthiophene-anchored GO electrocatalyst was prepared. The C–N bonds of the polymer served as active sites for the ORR catalyst.
Publisher: American Chemical Society (ACS)
Date: 24-02-2016
Abstract: In this study, we investigate the toxicity of hematite (α-Fe2O3) nanoparticles on the Madin-Darby Canine Kidney (MDCK) cell line. The oxide particles have been synthesized through two different methods and annealing conditions. These two methods, spray precipitation and precipitation, resulted in particles with rod-like and spherical morphology and feature different particle sizes, surface features, and magnetic properties. Through flow cytometry it was found that particle morphology heavily influences the degree to which the nanomaterials are internalized into the cells. It was also found that the ability of the nanoparticles to generate free radicals species is hindered by the formation of tetrahedrally coordinated maghemite-like (γ-Fe2O3) spinel defects on the surfaces of the particles. The combination of these two factors resulted in variable cytotoxic effects of the hematite nanoparticles synthesized with different conditions. This article highlights the importance on the fabrication method, materials properties, and surface characteristics on the cytotoxicity of hematite nanomaterials.
Publisher: Elsevier BV
Date: 2021
Publisher: Elsevier BV
Date: 10-2017
Publisher: IOP Publishing
Date: 02-2008
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C6MH00500D
Abstract: There has recently been a major thrust toward advanced research in the area of hierarchical carbon nanostructured electrodes derived from cellulosic resources, such as cellulose nanofibers (CNFs), which are accessible from natural cellulose and bacterial cellulose (BC).
Publisher: American Chemical Society (ACS)
Date: 04-05-2015
DOI: 10.1021/JP512165Q
Publisher: Elsevier BV
Date: 12-2012
Publisher: Wiley
Date: 18-08-2017
Abstract: Zeolitic imidazolate frameworks (ZIFs), a subclass of metal-organic frameworks (MOFs) built with tetrahedral metal ions and imidazolates, offer permanent porosity and high thermal and chemical stabilities. While ZIFs possess some attractive physical and chemical properties, it remains important to enhance their functionality for practical application. Here, an overview of the extensive strategies which have been developed to improve the functionality of ZIFs is provided, including linker modifications, functional hybridization of ZIFs via the encapsulation of guest species (such as metal and metal oxide nanoparticles and biomolecules) into ZIFs, and hybridization with polymeric matrices to form mixed matrix membranes for industrial gas and liquid separations. Furthermore, the developed strategies for achieving size and shape control of ZIF nanocrystals are considered, which are important for optimizing the textural characteristics as well as the functional performance of ZIFs and their derived materials/hybrids. Moreover, the recent trends of using ZIFs as templates for the derivation of nanoporous hybrid materials, including carbon/metal, carbon/oxide, carbon/sulfide, and carbon hosphide hybrids, are discussed. Finally, some perspectives on the potential future research directions and applications for ZIFs and ZIF-derived materials are offered.
Publisher: The Chemical Society of Japan
Date: 15-08-2017
Publisher: Springer Science and Business Media LLC
Date: 29-01-2019
DOI: 10.1038/S41598-018-36759-5
Abstract: Bimetallic nanoparticles (NPs) have aroused interest in various fields because of their synergetic and unique properties. Among those nanoparticles, we strategically approached and synthesized Au@Pt NPs via the sonochemical method with different molar ratios (e.g. 3:7, 5:5, and 7:3) of Au to Pt precursors. The particle structure was confirmed to be core-shell, and the size was estimated to be 60, 52, and 47 nm, respectively, for 3:7, 5:5, and 7:3 ratios of Au to Pt. The detailed structure and crystallinity of as-prepared Au@Pt NPs were further studied by scanning electron microscopy, transmission electron microscopy with element mapping, and X-ray diffraction. It should be noted that thickness of the dendritic Pt shell in the core-shell structure can be easily tuned by controlling the molar ratio of Au to Pt. To explore the possibility of this material as glucose sensor, we confirmed the detection of glucose using erometry. Two dynamic ranges in a calibration plot were displayed at 0.5–50.0 µM and 0.05–10.0 mM, and their detection limit as glucose sensor was determined to be 319.8 (±5.4) nM.
Publisher: American Chemical Society (ACS)
Date: 17-07-2017
Publisher: AIP Publishing
Date: 07-2017
DOI: 10.1063/1.4995650
Abstract: A porous barium titanate (BaTiO3) thin film was chemically synthesized using a surfactant-assisted sol-gel method in which micelles of hipathic diblock copolymers served as structure-directing agents. In the Raman spectrum of the porous BaTiO3 thin film, a peak corresponding to the ferroelectric tetragonal phase was observed at around 710 cm−1, and it remained stable at much higher temperature than the Curie temperature of bulk single-crystal BaTiO3 (∼130 °C). Measurements revealed that the ferroelectricity of the BaTiO3 thin film has high thermal stability. By analyzing high-resolution transmission electron microscope images of the BaTiO3 thin film by the fast Fourier transform mapping method, the spatial distribution of stress in the BaTiO3 framework was clearly visualized. Careful analysis also indicated that the porosity in the BaTiO3 thin film introduced anisotropic compressive stress, which deformed the crystals. The resulting elongated unit cell caused further displacement of the Ti4+ cation from the center of the lattice. This displacement increased the electric dipole moment of the BaTiO3 thin film, effectively enhancing its ferro(piezo)electricity.
Publisher: Elsevier BV
Date: 05-2016
Publisher: American Physical Society (APS)
Date: 08-02-2019
Publisher: Wiley
Date: 18-10-2018
Abstract: Graphene-organic frameworks (GOFs) is a new class of graphene-based materials in which structure and properties can be designed by controlling the length and concentration of organic ligands, comparable to their tunable metal-organic frameworks (MOFs) counterpart. The structural properties (e.g., surface area, pore volume) and physico-chemical properties (e.g., electronic, thermal, and mechanical) of GOFs can be tuned based on the synthetic conditions. Such GOFs are promising as the next generation of novel materials for a wide range of potential applications such as H
Publisher: IOP Publishing
Date: 05-08-2009
Publisher: Springer Science and Business Media LLC
Date: 08-11-2016
DOI: 10.1038/SREP36660
Abstract: Superconducting wires are widely used in fabricating magnetic coils in fusion reactors. In consideration of the stability of 11 B against neutron irradiation and lower induced radio-activation properties, MgB 2 superconductor with 11 B serving as boron source is an alternative candidate to be used in fusion reactor with severe irradiation environment. In present work, a batch of monofilament isotopic Mg 11 B 2 wires with amorphous 11 B powder as precursor were fabricated using powder-in-tube (PIT) process at different sintering temperature, and the evolution of their microstructure and corresponding superconducting properties was systemically investigated. Accordingly, the best transport critical current density ( J c ) = 2 × 10 4 A/cm 2 was obtained at 4.2 K and 5 T, which is even comparable to multi-filament Mg 11 B 2 isotope wires reported in other work. Surprisingly, transport J c vanished in our wire which was heat-treated at excessively high temperature (800 °C). Combined with microstructure observation, it was found that lots of big interconnected microcracks and voids that can isolate the MgB 2 grains formed in this whole s le, resulting in significant deterioration in inter-grain connectivity. The results can be a constructive guide in fabricating Mg 11 B 2 wires to be used as magnet coils in fusion reactor systems such as ITER-type tokamak magnet.
Publisher: IOP Publishing
Date: 22-02-2016
Publisher: Royal Society of Chemistry (RSC)
Date: 2023
DOI: 10.1039/D2MA00480A
Abstract: Electrochemical fabrication integrating templating strategies have paved the way for creating mesoporous metal alloy films with distinctive pores and functionalities for electrocatalysis, fuel cells, and sensor (bio) development.
Publisher: Wiley
Date: 27-04-2018
Abstract: In recent years, there have been many studies on metal/carbon hybrid materials for electrochemical applications. However, reducing the metal content in catalysts is still a challenge. Here, a facile synthesis of palladium (Pd) nanoparticle-embedded N-doped carbon fibers (Pd/N-C) through electropolymerization and reduction methods is demonstrated. The as-prepared Pd/N-C contains only 1.5 wt % Pd. Under optimal conditions, bisphenol A is detected by using erometry in two dynamic ranges from 0.1 to 10 μm and from 10 to 200 μm, and the obtained correlation coefficients are close to 0.9836 and 0.9987, respectively. The detection limit (DL) for bisphenol A is determined to be 29.44 (±0.77) nm.
Publisher: Springer Science and Business Media LLC
Date: 19-05-2017
DOI: 10.1038/NCOMMS15581
Abstract: Mesoporous noble metals are an emerging class of cutting-edge nanostructured catalysts due to their abundant exposed active sites and highly accessible surfaces. Although various noble metal (e.g. Pt, Pd and Au) structures have been synthesized by hard- and soft-templating methods, mesoporous rhodium (Rh) nanoparticles have never been generated via chemical reduction, in part due to the relatively high surface energy of rhodium (Rh) metal. Here we describe a simple, scalable route to generate mesoporous Rh by chemical reduction on polymeric micelle templates [poly(ethylene oxide)- b -poly(methyl methacrylate) (PEO- b -PMMA)]. The mesoporous Rh nanoparticles exhibited a ∼2.6 times enhancement for the electrocatalytic oxidation of methanol compared to commercially available Rh catalyst. Surprisingly, the high surface area mesoporous structure of the Rh catalyst was thermally stable up to 400 °C. The combination of high surface area and thermal stability also enables superior catalytic activity for the remediation of nitric oxide (NO) in lean-burn exhaust containing high concentrations of O 2 .
Publisher: AIP
Date: 2012
DOI: 10.1063/1.4712116
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7TA03356G
Abstract: A new nanoarchitecture approach based on metal–organic frameworks (MOFs) is reported that can achieve high electrochemical energy storage via utilizing both electric double-layer supercapacitive and pseudocapacitive properties within a single nanoporous composite particle.
Publisher: Wiley
Date: 11-09-2014
Abstract: A recent study on nanoporous carbon based materials (J. Am. Chem. Soc. 2012, 134, 2864) showed that the presence of abundant graphitized sp(2) carbon species in the frameworks led to higher affinity for aromatic hydrocarbons than their aliphatic analogues. Herein, improved understanding of the sensitive and selective detection of aromatic substances by using mesoporous carbon (MPC)-based materials, combined with a quartz crystal microbalance (QCM) sensor system, was obtained. MPCs were synthesized by direct carbonization of mesoporous polymers prepared from resol through a soft templating approach with Pluronic F127. The carbon-based frameworks can be graphitized through the addition of a cobalt source to the precursor solution, according to the catalytic activity of the cobalt nanoparticles formed during the carbonization process. From the Raman data, the degree of the graphitization was clearly increased by increasing the cobalt content and elevating the carbonization temperature. From a QCM study, it was proved that the highly graphitized MPCs exhibited a higher affinity for aromatic hydrocarbons than their aliphatic analogues. By increasing the degree of graphitization in the carbon-based pore walls, the MPCs showed both larger adsorption uptake and faster sensor response towards toxic benzene and toluene vapors.
Publisher: Wiley
Date: 25-03-2019
Publisher: Elsevier BV
Date: 12-2017
DOI: 10.1016/J.BIOS.2017.06.051
Abstract: Despite having reliable and excellent diagnostic performances, the currently available messenger RNA (mRNA) detection methods mostly use enzymatic lification steps of the target mRNA which is generally affected by the s le manipulations, lification bias and longer assay time. This paper reports an lification-free electrochemical approach for the sensitive and selective detection of mRNA using a screen-printed gold electrode (SPE-Au). The target mRNA is selectively isolated by magnetic separation and adsorbed directly onto an unmodified SPE-Au. The surface-attached mRNA is then measured by differential pulse voltammetry (DPV) in the presence of [Fe(CN)
Publisher: Wiley
Date: 04-10-2017
Abstract: Nanoporous carbon (NC) materials have attracted great research interest for supercapacitor applications, because of their excellent electrochemical and mechanical stability, good electrical conductivity, and high surface area. Although there are many reports on metal-organic framework (MOF)-derived carbon materials, previous synthetic studies have been hindered by imperfect control of particle sizes and shapes. Here, we show precise control of the particle sizes of MOF-525 from 100 nm to 750 nm. After conversion of MOF-525 to NC, the effects of variation of the particle size on the electrochemical performance have been carefully investigated. The results demonstrate that our NC is a potential candidate for practical supercapacitor applications.
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C8CC03639J
Abstract: A room-temperature catalyst for carbon monoxide oxidation based on gold-loaded mesoporous maghemite nanoflakes has been developed.
Publisher: Springer Science and Business Media LLC
Date: 11-01-2013
Publisher: AIP Publishing
Date: 2014
DOI: 10.1063/1.4862670
Abstract: A comprehensive study of the effects of structural imperfections in MgB2 superconducting wire has been conducted. As the sintering temperature becomes lower, the structural imperfections of the MgB2 material are increased, as reflected by detailed X-ray refinement and the normal state resistivity. The crystalline imperfections, caused by lattice disorder, directly affect the impurity scattering between the π and σ bands of MgB2, resulting in a larger upper critical field. In addition, low sintering temperature keeps the grain size small, which leads to a strong enhancement of pinning, and thereby, enhanced critical current density. Owing to both the impurity scattering and the grain boundary pinning, the critical current density, irreversibility field, and upper critical field are enhanced. Residual voids or porosities obviously remain in the MgB2, however, even at low sintering temperature, and thus block current transport paths.
Publisher: Wiley
Date: 02-04-2019
Publisher: Elsevier BV
Date: 06-2017
DOI: 10.1016/J.BIOS.2016.10.034
Abstract: DNA methylation is an epigenetic modification of DNA, where a methyl group is added at the fifth carbon of the cytosine base to form 5 methyl cytosine (5mC) without altering the DNA sequences. It plays important roles in regulating many cellular processes by modulating key genes expression. Alteration in DNA methylation patterns becomes particularly important in the aetiology of different diseases including cancers. Abnormal methylation pattern could contribute to the pathogenesis of cancer either by silencing key tumor suppressor genes or by activating oncogenes. Thus, DNA methylation biosensing can help in the better understanding of cancer prognosis and diagnosis and aid the development of therapies. Over the last few decades, a plethora of optical detection techniques have been developed for analyzing DNA methylation using fluorescence, Raman spectroscopy, surface plasmon resonance (SPR), electrochemiluminescence and colorimetric readouts. This paper aims to comprehensively review the optical strategies for DNA methylation detection. We also present an overview of the remaining challenges of optical strategies that still need to be focused along with the lesson learnt while working with these techniques.
Publisher: Elsevier BV
Date: 11-2019
Publisher: Wiley
Date: 05-12-2017
Publisher: Elsevier BV
Date: 11-2018
Publisher: Wiley
Date: 15-03-2021
Publisher: Wiley
Date: 27-06-2018
Publisher: Wiley
Date: 25-04-2020
DOI: 10.1111/JACE.17156
Publisher: Elsevier BV
Date: 02-2017
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7CC05673G
Abstract: Here, ultrathin nitrogen-doped carbon/graphene nano-sandwiches were synthesized by carbonization of graphene oxide-based nanosheets, which were fully covered with ultrasmall ZIF-8 nanocrystals.
Publisher: American Chemical Society (ACS)
Date: 24-05-2017
Abstract: A series of porous carbon spheres with precisely adjustable mesopores (4-16 nm), high specific surface area (SSA, ∼2000 m
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7RA03179C
Abstract: This work reports the synthesis of hybrid materials combining graphene oxide (GO) sheets with Prussian blue (PB) nanoparticles which can be converted into porous GO/iron oxide hybrids for supercapacitor applications.
Publisher: Elsevier BV
Date: 03-2017
Publisher: Elsevier BV
Date: 02-2018
Publisher: IOP Publishing
Date: 07-05-2015
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C7NR08895G
Abstract: Herein, we report the synthesis of gold (Au)-loaded mesoporous iron oxide (Fe 2 O 3 ) as a catalyst for both CO and NH 3 oxidation.
Publisher: Elsevier BV
Date: 10-2012
Publisher: American Chemical Society (ACS)
Date: 08-02-2019
DOI: 10.1021/ACS.ANALCHEM.8B03619
Abstract: Most of the current exosome-analysis strategies are time-consuming and largely dependent on commercial extraction kit-based preisolation step, which requires extensive s le manipulations, costly isolation kits, reagents, tedious procedures, and sophisticated equipment and is prone to bias/artifacts. Herein we introduce a simple method for direct isolation and subsequent detection of a specific population of exosomes using an engineered superparamagnetic material with multifunctional properties, namely, gold-loaded ferric oxide nanocubes (Au-NPFe
Publisher: IOP Publishing
Date: 23-06-2009
Publisher: Springer Science and Business Media LLC
Date: 02-03-2017
DOI: 10.1038/SREP43444
Abstract: An efficient cooling system and the superconducting magnet are essential components of magnetic resonance imaging (MRI) technology. Herein, we report a solid nitrogen (SN 2 ) cooling system as a valuable cryogenic feature, which is targeted for easy usability and stable operation under unreliable power source conditions, in conjunction with a magnesium diboride (MgB 2 ) superconducting magnet. The rationally designed MgB 2 /SN 2 cooling system was first considered by conducting a finite element analysis simulation, and then a demonstrator coil was empirically tested under the same conditions. In the SN 2 cooling system design, a wide temperature distribution on the SN 2 chamber was observed due to the low thermal conductivity of the stainless steel components. To overcome this temperature distribution, a copper flange was introduced to enhance the temperature uniformity of the SN 2 chamber. In the coil testing, an operating current as high as 200 A was applied at 28 K (below the critical current) without any operating or thermal issues. This work was performed to further the development of SN 2 cooled MgB 2 superconducting coils for MRI applications.
Publisher: Elsevier BV
Date: 2019
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C8NR04871A
Abstract: Pseudocapacitance, which is the storage of charge based on continuous and fast reversible redox reactions at the surface of the electrodes, is commonly observed in transition metal oxide based LIB anodes.
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C9CC03082D
Abstract: This work introduces transparent SiC-on-glass as a new platform for biosensing applications which enables cell culturing, stimulating, microscopy-imaging and bioelectrochemical detection.
Publisher: American Chemical Society (ACS)
Date: 19-12-2017
Abstract: Herein, we report the soft-templated preparation of mesoporous iron oxide using an asymmetric poly(styrene-b-acrylic acid-b-ethylene glycol) (PS-b-PAA-b-PEG) triblock copolymer. This polymer forms a micelle consisting of a PS core, a PAA shell, and a PEG corona in aqueous solutions, which can serve as a soft template. The mesoporous iron oxide obtained at an optimized calcination temperature of 400 °C exhibited an average pore diameter of 39 nm, with large specific surface area and pore volume of 86.9 m
Publisher: Informa UK Limited
Date: 25-09-2019
Publisher: American Chemical Society (ACS)
Date: 10-01-2018
Publisher: IOP Publishing
Date: 14-07-2016
Publisher: IOP Publishing
Date: 14-07-2017
Publisher: Elsevier BV
Date: 06-2015
Publisher: IOP Publishing
Date: 21-07-2016
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C6CP08827A
Abstract: Nanoporous anode materials with composition Li 1+x V 1−x O 2 @C have been prepared under mild synthetic conditions for lithium-ion batteries (LIBs).
Publisher: MDPI AG
Date: 21-03-2017
DOI: 10.3390/EN10030409
Publisher: Elsevier BV
Date: 07-2017
DOI: 10.1016/J.ACA.2017.04.034
Abstract: Development of simple and inexpensive method for the analysis of gene-specific DNA methylation is important for the diagnosis and prognosis of patients with cancer. Herein, we report a relatively simple and inexpensive electrochemical method for the sensitive and selective detection of gene-specific DNA methylation in oesophageal cancer. The underlying principle of the method relies on the affinity interaction between DNA bases and unmodified gold electrode. Since the affinity trend of DNA bases towards the gold surface follows as adenine (A) > cytosine (C) > guanine (G)> thymine (T), a relatively larger amount of bisulfite-treated adenine-enriched unmethylated DNA adsorbs on the screen-printed gold electrodes (SPE-Au) in comparison to the guanine-enriched methylated s le. The methylation levels were (i.e., different level of surface attached DNA molecules due to the base dependent differential adsorption pattern) quantified by measuring saturated amount of charge-compensating [Ru(NH
Publisher: Elsevier BV
Date: 10-2015
Publisher: Wiley
Date: 30-08-2017
Publisher: Springer Science and Business Media LLC
Date: 17-06-2014
Publisher: American Chemical Society (ACS)
Date: 24-08-2017
Publisher: Wiley
Date: 07-11-2016
Publisher: Elsevier BV
Date: 12-2017
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C9NR03644J
Abstract: Making mesoporous rhodium (Rh) with traditional soft-templating methods is challenging because Rh has a high surface energy compared to other metals.
Publisher: Springer Science and Business Media LLC
Date: 15-02-2014
Start Date: 2013
End Date: 12-2016
Amount: $375,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 06-2012
End Date: 08-2016
Amount: $270,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 06-2019
End Date: 12-2022
Amount: $180,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 10-2021
End Date: 09-2024
Amount: $476,333.00
Funder: Australian Research Council
View Funded ActivityStart Date: 07-2023
End Date: 08-2024
Amount: $586,779.00
Funder: Australian Research Council
View Funded ActivityStart Date: 12-2018
End Date: 12-2022
Amount: $320,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 07-2024
End Date: 07-2027
Amount: $471,472.00
Funder: Australian Research Council
View Funded Activity