ORCID Profile
0000-0002-4196-1225
Current Organisations
RWTH Aachen University
,
University of Sheffield
,
University of South Australia
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Springer Science and Business Media LLC
Date: 16-05-2020
Publisher: Springer Science and Business Media LLC
Date: 23-11-2019
DOI: 10.1007/S11356-019-06845-W
Abstract: Lead (Pb(II)) pollution in water poses a serious threat to human health in many parts of the world. In the past decades, research has been aimed at developing efficient and cost-effective methods to address the problem. In this study, dimethyl sulfoxide (DMSO) and potassium acetate (K-Ac) intercalated kaolinite complexes were synthesized and subsequently utilized for Pb(II) removal from water. The intercalation of kaolinite with DMSO was found to be useful for expanding the interlayer space of the clay mineral from 0.72 to 1.12 nm. Kaolinite intercalation with K-Ac (KDK) increased the interlayer space from 1.12 to 1.43 nm. The surface area of KDK was found to be more than threefold higher as compared to natural kaolinite (NK). Batch experimental results revealed that the maximum Pb(II) uptake capacity of KDK was 46.45 mg g −1 which was higher than the capacity of NK (15.52 mg g −1 ). Reusability studies showed that KDK could be reused for 5 cycles without substantially losing its adsorption capacity. Furthermore, fixed-bed column tests confirmed the suitability of KDK in continuous mode for Pb(II) removal. Successful application of intercalated kaolinite for Pb(II) adsorption in batch and column modes suggests its application in water treatment (especially removal of alent metals).
Publisher: Elsevier BV
Date: 09-2019
DOI: 10.1016/J.JHAZMAT.2019.05.053
Abstract: Arsenic (As) poses a tremendous threat to human health due to exposure through arsenic-contaminated drinking water and/or food. We aimed to develop organically modified clay adsorbents for the removal of As from aqueous solution. We modified a smectite s le using three organic agents, namely hexadecyl trimethylammonium (HDTMA), chitosan and citric acid, and characterized the products using X-ray diffraction, infrared spectroscopy, and scanning electron microscopy techniques. The characterization techniques suggested successful organic modifications of the smectite s le. The surfactant-modified smectite was the most efficient (66.9%) As removing adsorbent with a maximum adsorption capacity of 473.2 μg g
Publisher: Elsevier
Date: 2022
Publisher: Elsevier BV
Date: 2018
DOI: 10.1016/J.SCITOTENV.2017.08.132
Abstract: The search for effective materials for environmental cleanup is a scientific and technological issue of paramount importance. Among various materials, carbon nanotubes (CNTs) possess unique physicochemical, electrical, and mechanical properties that make them suitable for potential applications as environmental adsorbents, sensors, membranes, and catalysts. Depending on the intended application and the chemical nature of the target contaminants, CNTs can be designed through specific functionalization or modification processes. Designer CNTs can remarkably enhance contaminant removal efficiency and facilitate nanomaterial recovery and regeneration. An increasing number of CNT-based materials have been used to treat erse organic, inorganic, and biological contaminants. These success stories demonstrate their strong potential in practical applications, including wastewater purification and desalination. However, CNT-based technologies have not been broadly accepted for commercial use due to their prohibitive cost and the complex interactions of CNTs with other abiotic and biotic environmental components. This paper presents a critical review of the existing literature on the interaction of various contaminants with CNTs in water and soil environments. The preparation methods of various designer CNTs (surface functionalized and/or modified) and the functional relationships between their physicochemical characteristics and environmental uses are discussed. This review will also help to identify the research gaps that must be addressed for enhancing the commercial acceptance of CNTs in the environmental remediation industry.
Publisher: Springer Science and Business Media LLC
Date: 27-12-2200
DOI: 10.1007/S41748-022-00336-8
Abstract: While the potential of biochar (BC) to immobilize potentially toxic elements (PTEs) in contaminated soils has been studied and reviewed, no review has focused on the potential use of BC for enhancing the phytoremediation efficacy of PTE-contaminated soils. Consequently, the overarching purpose in this study is to critically review the effects of BC on the mobilization, phytoextraction, phytostabilization, and bioremediation of PTEs in contaminated soils. Potential mechanisms of the interactions between BC and PTEs in soils are also reviewed in detail. We discuss the promises and challenges of various approaches, including potential environmental implications, of BC application to PTE-contaminated soils. The properties of BC (e.g., surface functional groups, mineral content, ionic content, and π-electrons) govern its impact on the (im)mobilization of PTEs, which is complex and highly element-specific. This review demonstrates the contrary effects of BC on PTE mobilization and highlights possible opportunities for using BC as a mobilizing agent for enhancing phytoremediation of PTEs-contaminated soils.
Publisher: Elsevier BV
Date: 05-2018
Publisher: Elsevier BV
Date: 06-2020
Publisher: American Chemical Society (ACS)
Date: 20-11-2013
DOI: 10.1021/ES401568K
Abstract: Unlike lower valent iron (Fe), the potential role of lower valent manganese (Mn) in the reduction of hexavalent chromium (Cr(VI)) in soil is poorly documented. In this study, we report that citrate along with Mn(II) and clay minerals (montmorillonite and kaolinite) reduce Cr(VI) both in aqueous phase and in the presence of dissolved organic carbon (SDOC) extracted from a forest soil. The reduction was favorable at acidic pH (up to pH 5) and followed the pseudo-first-order kinetic model. The citrate (10 mM) + Mn(II) (182.02 μM) + clay minerals (3% w/v) system in SDOC accounted for complete reduction of Cr(VI) (192.32 μM) in about 72 h at pH 4.9. In this system, citrate was the reductant, Mn(II) was a catalyst, and the clay minerals acted as an accelerator for both the reductant and catalyst. The clay minerals also serve as a sink for Cr(III). This study reveals the underlying mechanism of the Mn(II)-induced reduction of Cr(VI) by organic ligand in the presence of clay minerals under certain environmental conditions.
Publisher: Springer Science and Business Media LLC
Date: 04-01-2018
DOI: 10.1007/S10653-017-0050-3
Abstract: Unfortunately, in the original publication of the article, Prof. Yong Sik Ok's affiliation was incorrectly published. The author's affiliation is as follows.
Publisher: Elsevier BV
Date: 11-2023
Publisher: Elsevier BV
Date: 11-2022
DOI: 10.1016/J.SCITOTENV.2022.157168
Abstract: Nanoplastics are drawing a significant attention as a result of their propensity to spread across the environment and pose a threat to all organisms. The presence of nanoplastics in water is given attention nowadays as the transit of nanoplastics occurs through the aquatic ecosphere besides terrestrial mobility. The principal removal procedures for macro-and micro-plastic particles are effective, but nanoparticles escape from the treatment, increasing in the water and significantly influencing the society. This critical review is aimed to bestow the removal technologies of nanoplastics from aquatic ecosystems, with a focus on the treatment of freshwater, drinking water, and wastewater, as well as the importance of transit and its impact on health concerns. Still, there exists a gap in providing a collective knowledge on the methods available for nanoplastics removal. Hence, this review offered various nanoplastic removal technologies (microorganism-based degradation, membrane separation with a reactor, and photocatalysis) that could be the practical/effective measures along with the traditional procedures (filtration, coagulation, centrifugation, flocculation, and gravity settling). From the analyses of different treatment systems, the effectiveness of nanoplastics removal depends on various factors, source, size, and type of nanoplastics apart from the treatment method adopted. Combined removal methods, filtration with coagulation offer great scope for the removal of nanoplastics from drinking water with >99 % efficiency. The collected data could serve as base-line information for future research and development in water nanoplastics cleanup.
Publisher: Elsevier BV
Date: 02-2017
DOI: 10.1016/J.SCITOTENV.2016.11.037
Abstract: Clay-bacterial interaction can significantly influence the biodegradation of organic contaminants in the environment. A moderate heat treatment of palygorskite could alter the physicochemical properties of the clay mineral and thus support the growth and function of polycyclic aromatic hydrocarbon (PAH)-degrading bacteria. By using
Publisher: Elsevier BV
Date: 02-2011
Publisher: Springer Science and Business Media LLC
Date: 26-01-2021
DOI: 10.1038/S41416-020-01185-W
Abstract: Epidemiological studies provide strong evidence for a role of endogenous sex hormones in the aetiology of breast cancer. The aim of this analysis was to identify genetic variants that are associated with urinary sex-hormone levels and breast cancer risk. We carried out a genome-wide association study of urinary oestrone-3-glucuronide and pregnanediol-3-glucuronide levels in 560 premenopausal women, with additional analysis of progesterone levels in 298 premenopausal women. To test for the association with breast cancer risk, we carried out follow-up genotyping in 90,916 cases and 89,893 controls from the Breast Cancer Association Consortium. All women were of European ancestry. For pregnanediol-3-glucuronide, there were no genome-wide significant associations for oestrone-3-glucuronide, we identified a single peak mapping to the CYP3A locus, annotated by rs45446698. The minor rs45446698-C allele was associated with lower oestrone-3-glucuronide (−49.2%, 95% CI −56.1% to −41.1%, P = 3.1 × 10 –18 ) in follow-up analyses, rs45446698-C was also associated with lower progesterone (−26.7%, 95% CI −39.4% to −11.6%, P = 0.001) and reduced risk of oestrogen and progesterone receptor-positive breast cancer (OR = 0.86, 95% CI 0.82–0.91, P = 6.9 × 10 –8 ). The CYP3A7*1C allele is associated with reduced risk of hormone receptor-positive breast cancer possibly mediated via an effect on the metabolism of endogenous sex hormones in premenopausal women.
Publisher: Elsevier BV
Date: 09-2016
Publisher: Springer Science and Business Media LLC
Date: 06-08-2020
Publisher: Informa UK Limited
Date: 24-06-2021
Publisher: Elsevier BV
Date: 2021
Publisher: Informa UK Limited
Date: 09-2016
Publisher: CRC Press
Date: 17-02-2021
Publisher: Association for Computing Machinery (ACM)
Date: 07-12-2023
DOI: 10.1145/3534970
Abstract: Movement dataset reviews exist but are limited in coverage, both in terms of size and research discipline. While topic-specific reviews clearly have their merit, it is critical to have a comprehensive overview based on a systematic survey across disciplines. This enables higher visibility of datasets available to the research communities and can foster interdisciplinary collaborations. We present a catalogue of 704 open datasets described by 10 variables that can be valuable to researchers searching for secondary data: name and reference, creation purpose, data type, annotations, source, population groups, ordinal size of people captured simultaneously, URL, motion capture sensor, and funders. The catalogue is available in the supplementary materials. We provide an analysis of the datasets and further review them under the themes of human ersity, ecological validity, and data recorded. The resulting 12-dimension framework can guide researchers in planning the creation of open movement datasets. This work has been the interdisciplinary effort of researchers across affective computing, clinical psychology, disability innovation, ethnomusicology, human-computer interaction, machine learning, music cognition, music computing, and movement neuroscience.
Publisher: Elsevier BV
Date: 09-2020
Publisher: Elsevier BV
Date: 11-2019
DOI: 10.1016/J.JENVMAN.2019.109530
Abstract: This work aimed at elucidating the role of bacteria present in the gut of the earthworm Metaphire posthuma in plant growth promotion and toxic trace elements (TTEs) bioremediation. We isolated and identified three bacterial strains Bacillus safensis (MF 589718), Bacillus flexus (MF 589717) and Staphylococcus haemolyticus (MF 589719) among which the Bacillus strains appeared to be significantly more potent than the Staphylococcus strain (P < 0.05) in promoting plant growth and removing TTE (Cr(VI), Cu(II) and Zn(II)) from aqueous media. These strains exhibited several plant growth promoting traits (e.g., indole acetic acid (IAA), gibberellic acid (GA) and ammonium ion production, 1-aminocyclopropane- 1-carboxylic acid (ACC) deaminase activity, and phosphate solubilizing potential). In a pot trial, the gut isolates improved Vigna radiata seed germination, and enhanced the leaf area (30-79%), total chlorophyll content (26-67%) and overall root-shoot biomass (32-83%) as compared to the control. Bacillus safensis and Bacillus flexus were equipotent in removing Cr(VI) (40.5 and 40.3%) from aqueous media the former triumphed for Zn(II) removal (52.8%), while the latter performed better for Cu(II) removal (43.5%). The gut isolates successfully solubilized phosphate even in TTE-contaminated conditions. The results demonstrate that the earthworm's enteric bacteria possess inherent plant growth promoting, TTE resistance and phosphate solubilization (even under TTE stress) properties which can be further explored for their application in sustainable crop production and environmental management.
Publisher: Elsevier BV
Date: 11-2022
DOI: 10.1016/J.BIORTECH.2022.127912
Abstract: Microalgae can add value to biological wastewater treatment processes by capturing carbon and nutrients and producing valuable biomass. Harvesting small cells from liquid media is a challenge easily addressed with biofilm cultivation. Three experimental photobioreactors were constructed from inexpensive materials (e.g. plexiglass, silicone) for hybrid liquid/biofilm cultivation of a microalgal-bacterial consortia in aquaculture effluent. Three light regimes (full-spectrum, blue-white, and red) were implemented to test light spectra as a process control. High-intensity full-spectrum light caused photoinhibition and low biomass yield, but produced the most polyhydroxybutyrate (PHB) (0.14 mg g
Publisher: MDPI AG
Date: 03-12-2022
Abstract: The incorporation of biochar into soils has been recognized as a promising method to combat climate change. However, the full carbon reduction potential of biochar in paddy soils is still unclear. To give an overview of the quantified carbon reduction, a meta-analysis model of different carbon emission factors was established, and the life cycle-based carbon reduction of biochar was estimated. After one year of incorporation, biochar significantly increased the total soil carbon (by 27.2%) and rice production (by 11.3%) stimulated methane (CH4) and carbon dioxide (CO2) emissions by 13.6% and 1.41%, respectively, but having insignificant differences with no biochar amendment and reduced nitrous oxide (N2O) emissions by 25.1%. The soil total carbon increase was mainly related to the biochar rate, whereas CH4 emissions were related to the nitrogen fertilizer application rate. Biochar pyrolysis temperature, soil type, and climate were the main factors to influence the rice yield. The total carbon reduction potential of biochar incorporation in Chinese paddy soils in 2020 ranged from 0.0066 to 2.0 Pg C using a biochar incorporation rate from 2 to 40 t ha−1. This study suggests that biochar application has high potential to reduce carbon emissions, thereby contributing to the carbon neutrality goal, but needs field-scale long-term trials to validate the predictions.
Publisher: Informa UK Limited
Date: 29-02-2016
Publisher: Elsevier BV
Date: 10-2016
Publisher: Elsevier BV
Date: 02-2017
Publisher: Elsevier BV
Date: 2020
DOI: 10.1016/J.JCIS.2019.09.106
Abstract: Green synthesis of nanoparticles is becoming increasingly popular as a simple and environmentally friendly method. In this study, iron-based nanoparticles (Fe-NPs) were successfully prepared using a peanut skin extract, where the peanut skin as an agricultural waste product was easy to obtain in large quantities, relatively inexpensive and also environmentally friendly. The average particle size of the produced Fe-NPs changed with their post-synthesis drying conditions. Under vacuum drying at 60 °C, the smallest average particle size obtained was 10.6 nm. The synthesized Fe-NPs had a core shell-like structure, in which the core was composed of Fe
Publisher: Apple Academic Press
Date: 04-02-2015
DOI: 10.1201/B18107
Publisher: Elsevier BV
Date: 10-2013
DOI: 10.1016/J.JHAZMAT.2012.11.061
Abstract: Organoclays have wide spread application in environmental remediation and nanocomposites synthesis. Some of the quaternary ammonium compounds (QACs) commonly used to prepare organoclays are toxic to biota. However, information on the toxicity of organoclays is rarely available in the literature. This study assessed the toxicity of three laboratory prepared bentonite organoclays on the soil microbially mediated processes (such as dehydrogenase activity and potential nitrification) and soil inhabiting animals, such as earthworms. Toxicity to both microbial processes and earthworm followed the order: hexadecyltrimethyl ammonium modified bentonite>octadecyltrimethyl ammonium modified bentonite>arquad modified bentonite>unmodified bentonite. The organoclays were able to cause slight improvement (up to 25%) in the potential nitrification in some soils when they were added at low application rates up to 5%, but caused reduction (3-86%) in the dehydrogenase activity in all the soils irrespective of loading rates. The organoclays were extremely toxic to the survival and vigour of the earthworms. The average body weight loss of the worms reached as high as 62% in hexadecyltrimethyl ammonium modified bentonite treated soil even at 1% loading. This study holds utmost importance in assessing the toxicity of organoclays to soil microbially mediated processes and earthworms.
Publisher: Informa UK Limited
Date: 03-2012
Publisher: Elsevier BV
Date: 05-2022
DOI: 10.1016/J.ENVRES.2021.112179
Abstract: The accumulation of microplastics (MPs) and nanoplastics (NPs) in terrestrial and aquatic ecosystems has raised concerns because of their adverse effects on ecosystem functions and human health. Plastic waste management has become a universal problem in recent years. Hence, sustainable plastic waste management techniques are vital for achieving the United Nations Sustainable Development Goals. Although many reviews have focused on the occurrence and impact of micro- and nanoplastics (MNPs), there has been limited focus on the management of MNPs. This review first summarizes the ecotoxicological impacts of plastic waste sources and issues related to the sustainable management of MNPs in the environment. This paper then critically evaluates possible approaches for incorporating plastics into the circular economy in order to cope with the problem of plastics. Pollution associated with MNPs can be tackled through source reduction, incorporation of plastics into the circular economy, and suitable waste management. Appropriate infrastructure development, waste valorization, and economically sound plastic waste management techniques and viable alternatives are essential for reducing MNPs in the environment. Policymakers must pay more attention to this critical issue and implement appropriate environmental regulations to achieve environmental sustainability.
Publisher: Elsevier BV
Date: 11-2010
DOI: 10.1016/J.JHAZMAT.2010.06.110
Abstract: Unlike hydrophobic organic pollutants, the potential of organoclays to adsorb inorganic ionic contaminants is relatively underexplored. The present study attempts to characterise bentonite (QB) based organoclays synthesised from a commercially available, low-cost alkyl ammonium surfactant Arquad® 2HT-75 (Aq) and test their ability to adsorb hexavalent chromium (Cr (VI)) in aqueous solution. XRD, FTIR and TGA characterisation techniques prove successful modification of the bentonite structure and reveal that higher surfactant loadings gives rise to more ordered surfactant conformation in the organoclays. The zeta potential values indicate that higher surfactant loadings also create positive charges on the organoclay surfaces. Detailed isothermal and kinetic studies show that the organoclays effectively remove hexavalent chromium (Cr (VI)) from aqueous solution by both physical and chemical adsorption processes. Higher surfactant loadings provide better adsorption efficiency. The adsorption performance is reasonably efficient under the levels of pH, temperature, electrolyte concentration and natural organic matter concentration that generally prevail in contaminated soil and water. This study shows that organoclay sorbents offer good potential for remediating Cr (VI) under real environmental conditions.
Publisher: Elsevier BV
Date: 12-2017
DOI: 10.1016/J.BIORTECH.2017.07.073
Abstract: Objective of this study was to investigate the mechanisms of 2,4-Dichlorophynoxy acetic acid (2,4-D) sorption on biochar in aqueous solutions. Sorption isotherm, kinetics, and desorption experiments were performed to identify the role of biochars' feedstock and production conditions on 2,4-D sorption. Biochars were prepared from various green wastes (tea, burcucumber, and hardwood) at two pyrolytic temperatures (400 and 700°C). The tea waste biochar produced at 700°C was further activated with steam under a controlled flow. The sorption of 2,4-D was strongly dependent on the biochar properties such as specific surface area, surface functional groups, and microporosity. The steam activated biochar produced from tea waste showed the highest (58.8mgg
Publisher: Springer Science and Business Media LLC
Date: 03-12-2017
Publisher: Elsevier BV
Date: 07-2020
Publisher: Informa UK Limited
Date: 31-08-2022
Publisher: Elsevier BV
Date: 06-2023
Publisher: Elsevier BV
Date: 08-2022
DOI: 10.1016/J.ENVPOL.2022.119339
Abstract: Biodegradation of microplastics (MPs) in contaminated biowastes has received big scientific attention during the past few years. The aim here is to study the impacts of livestock manure biochar (LMBC) on the biodegradation of polyhydroxyalkanoate microplastics (PHA-MPs) during composting, which have not yet been verified. LMBC (10% wt/wt) and PHA-MPs (0.5% wt/wt) were added to a mixture of pristine cow manure and sawdust for composting, whereas a mixture without LMBC served as the control (CK). The maximum degradation rate of PHA-MPs (22-31%) was observed in the thermophilic composting stage in both mixtures. LMBC addition significantly (P < 0.05) promoted PHA-MPs degradation and increased the carbon loss and oxygen loading of PHA-MPs compared to CK. Adding LMBC accelerated the cleavage of C-H bonds and oxidation of PHA-MPs, and increased the O-H, CO and C-O functional groups on MPs. Also, LMBC addition increased the relative abundance of dominant microorganisms (Firmicutes, Proteobacteria, Deinococcus-Thermus, Bacteroidetes, Ascomycota and Basidiomycota) and promoted the enrichment of MP-degrading microbial biomarkers (e.g., Bacillus, Thermobacillus, Luteimonas, Chryseolinea, Aspergillus and Mycothermus). LMBC addition further increased the complexity and connectivity between dominant microbial biomarkers and PHA-MPs degradation characteristics, strengthened their positive relationship, thereby accelerated PHA-MPs biodegradation, and mitigated the potential environmental and human health risk. These findings provide a reference point for reducing PHA-MPs in compost and safe recycling of MPs contaminated organic wastes. However, these results should be validated with other composting matrices and conditions.
Publisher: Elsevier
Date: 2019
Publisher: Elsevier BV
Date: 11-2022
DOI: 10.1016/J.ENVRES.2022.114072
Abstract: Radioactive elements released into the environment by accidental discharge constitute serious health hazards to humans and other organisms. In this study, three gasified biochars prepared from feedstock mixtures of wood, chicken manure, and food waste, and a KOH-activated biochar (40% food waste + 60% wood biochar (WFWK)) were used to remove cesium (Cs
Publisher: Springer International Publishing
Date: 2018
Publisher: Elsevier BV
Date: 12-2019
DOI: 10.1016/J.SCITOTENV.2019.134114
Abstract: Ammonia (NH
Publisher: Elsevier BV
Date: 10-2021
Publisher: Elsevier BV
Date: 03-2021
Publisher: Elsevier BV
Date: 12-2016
Publisher: Elsevier BV
Date: 08-2021
Publisher: Elsevier BV
Date: 2017
DOI: 10.1016/J.JENVMAN.2016.05.034
Abstract: Chromium (Cr) is one of the common metals present in the soils and may have an extremely deleterious environmental impact depending on its redox state. Among two common forms, trivalent Cr(III) is less toxic than hexavalent Cr(VI) in soils. Carbon (C) based materials including biochar could be used to alleviate Cr toxicity through converting Cr(VI) to Cr(III). Incubation experiments were conducted to examine Cr(VI) reduction in different soils (Soil 1: pH 7.5 and Soil 2: pH 5.5) with three manures from poultry (PM), cow (CM) and sheep (SM), three respective manure-derived biochars (PM biochar (PM-BC), CM biochar (CM-BC) and SM biochar (SM-BC)) and two modified biochars (modified PM-BC (PM-BC-M) and modified SM-BC (SM-BC-M)). Modified biochar was synthesized by incorporating chitosan and zerovalent iron (ZVI) during pyrolysis. Among biochars, highest Cr(VI) reduction was observed with PM-BC application (5% w/w) (up to 88.12 mg kg
Publisher: Elsevier BV
Date: 09-2021
Publisher: The Royal Society
Date: 04-08-2021
Abstract: This special issue provides an assessment of the contribution of soils to Nature's Contributions to People (NCP). Here, we combine this assessment and previously published relationships between NCP and delivery on the UN Sustainable Development Goals (SDGs) to infer contributions of soils to the SDGs. We show that in addition to contributing positively to the delivery of all NCP, soils also have a role in underpinning all SDGs. While highlighting the great potential of soils to contribute to sustainable development, it is recognized that poorly managed, degraded or polluted soils may contribute negatively to both NCP and SDGs. The positive contribution, however, cannot be taken for granted, and soils must be managed carefully to keep them healthy and capable of playing this vital role. A priority for soil management must include: (i) for healthy soils in natural ecosystems, protect them from conversion and degradation (ii) for managed soils, manage in a way to protect and enhance soil bio ersity, health and sustainability and to prevent degradation and (iii) for degraded soils, restore to full soil health. We have enough knowledge now to move forward with the implementation of best management practices to maintain and improve soil health. This analysis shows that this is not just desirable, it is essential if we are to meet the SDG targets by 2030 and achieve sustainable development more broadly in the decades to come. This article is part of the theme issue ‘The role of soils in delivering Nature's Contributions to People’.
Publisher: Elsevier
Date: 2018
Publisher: Elsevier BV
Date: 11-2011
DOI: 10.1016/J.JHAZMAT.2011.08.016
Abstract: Organoclays are increasingly being used to remediate both contaminated soils and waste water. The present study was attempted to elucidate the structural evolution of bentonite based organoclays prepared from a commercially available, low-cost alkyl ammonium surfactant Arquad(®) 2HT-75. XRD, FTIR, SEM and zeta potential measurement were used to characterise the organoclays. In particular, the relationship between surface charge characteristics of the organoclays and their ability to remediate organic contaminants such as phenol and p-nitrophenol was investigated. The investigation revealed that the arrangement and conformation of surfactant molecules in the bentonite became more regular, ordered and solid-like as of Arquad(®) 2HT-75 loading increased. This also led to the formation of a positive zeta potential on the surface of organobentonites prepared with 3.57:1 and 4.75:1 surfactant-clay (w/w) ratio. The zeta potential values decreased with increasing pH of the suspension. The adsorption data of phenol and p-nitrophenol were best fitted to Freundlich isotherm model. The adsorption was controlled by multiple mechanisms of partitioning, physico-sorption and chemisorption. The outcomes of this study are useful for the synthesis of low cost organobentonite adsorbents for the remediation of ionisable organic contaminants such as phenol and p-nitrophenol from waste water.
Publisher: Elsevier BV
Date: 2023
DOI: 10.2139/SSRN.4363634
Publisher: Elsevier BV
Date: 06-2022
Publisher: Elsevier BV
Date: 06-2022
DOI: 10.1016/J.SCITOTENV.2022.153941
Abstract: Pyrolysis is considered as a promising method to immobilize potentially toxic elements (PTEs) in animal manures. However, comparative study on characteristics and environmental risk of PTEs in biochar obtained by pyrolysis of animal manure at different reactors are lacking. In this study, swine manure was pyrolyzed at 300-600 °C in a lab-scale or pilot-scale reactor with the aim to investigate their effects on characteristics and environmental risk of As, Cd, Cu, Ni, Pb, and Zn in swine manure biochar. Results showed that biochars produced from pilot scale had lower pH and carbon (C) content but higher oxygen (O) content than those from lab scale. Biochars from pilot scale had higher total PTEs (except Cd) concentrations and releasable PTEs (except Pb) but lower CaCl
Publisher: Elsevier BV
Date: 11-2016
DOI: 10.1016/J.WATRES.2016.08.009
Abstract: Bioremediation of polycyclic aromatic hydrocarbons (PAHs) is extremely challenging when they coexist with heavy metals. This constrain has led to adsorption-based techniques that help immobilize the metals and reduce toxicity. However, the adsorbents can also non-selectively bind the organic compounds, which reduces their bioavailability. In this study we developed a surface-engineered organoclay (Arquad
Publisher: Apple Academic Press
Date: 05-02-2015
DOI: 10.1201/B18107-25
Publisher: Elsevier BV
Date: 12-2019
DOI: 10.1016/J.CHEMOSPHERE.2019.124384
Abstract: This study evaluates a novel adsorbent for ciprofloxacin (CPX) removal from water using a composite derived from municipal solid waste biochar (MSW-BC) and montmorillonite (MMT). The composite adsorbent and pristine materials were characterized using powder X-Ray Diffraction (PXRD), Fourier-Transform Infrared (FTIR) spectroscopy, and Scanning Electron Microscope (SEM) before and after the adsorption. Batch experiments were conducted to study the mechanisms involved in the adsorption process. Ciprofloxacin sorption mechanisms were interpreted in terms of its pH-dependency and the distribution coefficients. The SEM images confirmed the successful binding of MMT onto the MSW-BC through flaky structure along with a porous morphology. Encapsulation of MMT onto MSW-BC was exhibited through changes in the basal spacing of MMT via PXRD analysis. Results from FTIR spectra indicated the presence of functional groups for both pristine materials and the composite that were involved in the adsorption reaction. The Hill isotherm model and pseudo-second-order and Elovich kinetic models fitted the batch sorption data, which explained the surface heterogeneity of the composite and cooperative adsorption mechanisms. Changes made to the MSW-BC through the introduction of MMT, enhanced the active sites on the composite adsorbent, thereby improving its interaction with ionizable CPX molecules giving high sorption efficiency.
Publisher: Elsevier BV
Date: 05-2021
Publisher: Elsevier BV
Date: 04-2019
DOI: 10.1016/J.ENVINT.2019.01.071
Abstract: Soil microorganisms are an important indicator of soil fertility and health. However, our state of knowledge about soil microbial activities, community compositions and carbon use patterns under metal contaminations is still poor. This study aimed to evaluate the influences of heavy metals (Cd and Pb) on soil microorganisms by investigating the microbial community composition and carbon use preferences. Metal pollution was approached both singly and jointly with low (25 and 2500 mg kg
Publisher: Elsevier BV
Date: 02-2021
Publisher: Elsevier BV
Date: 02-2023
Publisher: Elsevier BV
Date: 04-2017
DOI: 10.1016/J.ENVPOL.2017.01.022
Abstract: Bioremediation of polycyclic aromatic hydrocarbon (PAH)-contaminated soils requires a higher microbial viability and an increased PAH bioavailability. The clay/modified clay-modulated bacterial degradation could deliver a more efficient removal of PAHs in soils depending on the bioavailability of the compounds. In this study, we modified clay minerals (smectite and palygorskite) with mild acid (HCl) and alkali (NaOH) treatments (0.5-3 M), which increased the surface area and pore volume of the products, and removed the impurities without collapsing the crystalline structure of clay minerals. In soil incubation studies, supplements with the clay products increased bacterial growth in the order: 0.5 M HCl ≥ unmodified ≥ 0.5 M NaOH ≥ 3 M NaOH ≥ 3 M HCl for smectite, and 0.5 M HCl ≥ 3 M NaOH ≥ 0.5 M NaOH ≥ 3 M HCl ≥ unmodified for palygorskite. A
Publisher: Springer Science and Business Media LLC
Date: 19-02-2018
DOI: 10.1038/S41477-018-0108-Y
Abstract: The magnitude of future climate change could be moderated by immediately reducing the amount of CO
Publisher: Elsevier BV
Date: 11-2017
DOI: 10.1016/J.CHEMOSPHERE.2017.08.036
Abstract: A palygorskite-iron oxide nanocomposite (Pal-IO) was synthesized in situ by embedding magnetite into the palygorskite structure through co-precipitation method. The physico-chemical characteristics of Pal-IO and their pristine components were examined through various spectroscopic and micro-analytical techniques. Batch adsorption experiments were conducted to evaluate the performance of Pal-IO in removing Pb(II) from aqueous solution. The surface morphology, magnetic recyclability and adsorption efficiency of regenerated Pal-IO using desorbing agents HCl (Pal-IO-HCl) and ethylenediaminetetraacetic acid disodium salt (EDTA-Na
Publisher: Springer Science and Business Media LLC
Date: 22-08-2008
DOI: 10.1007/S10661-008-0508-Y
Abstract: There is concern that transgenic Bt-crops carry genes that could have undesirable effects on natural and agro-ecosystem functions. We investigated the effect of Bt-cotton (expressing the Cry 1Ac protein) on several microbial and biochemical indicators in a sandy loam soil. Bt-cotton (MRC-6301Bt) and its non-transgenic near-isoline (MRC-6301) were grown in a net-house on a sandy clay loam soil. Soil and root s les were collected 60, 90, and 120 days after sowing. Soil from a control (no-crop) treatment was also included. S les were analysed for microbial biomass C, N and P (MBC, MBN, MBP), total organic carbon (TOC), and several soil enzyme activities. The microbial quotient (MQ) was calculated as the ratio of MBC-to-TOC. The average of the three s ling events revealed a significant increase in MBC, MBN, MBP and MQ in the soil under Bt-cotton over the non-Bt isoline. The TOC was similar in Bt and non-Bt systems. Potential N mineralization, nitrification, nitrate reductase, and acid and alkaline phosphatase activities were all higher in the soil under Bt-cotton. Root dry weights were not different (P > 0.05), but root volume of Bt-cotton was higher on 90 and 120 days than that of non-Bt cotton. The time of s ling strongly affected the above parameters, with most being highest on 90 days after sowing. We concluded from the data that there were some positive or no negative effects of Bt-cotton on the studied indicators, and therefore cultivation of Bt-cotton appears to be no risk to soil ecosystem functions.
Publisher: Elsevier BV
Date: 2016
DOI: 10.1016/J.ACA.2015.10.040
Abstract: Zero-valent iron nanoparticles (nZVI) have been widely tested as they are showing significant promise for environmental remediation. However, many recent studies have demonstrated that their mobility and reactivity in subsurface environments are significantly affected by their tendency to aggregate. Both the mobility and reactivity of nZVI mainly depends on properties such as particle size, surface chemistry and bulk composition. In order to ensure efficient remediation, it is crucial to accurately assess and understand the implications of these properties before deploying these materials into contaminated environments. Many analytical techniques are now available to determine these parameters and this paper provides a critical review of their usefulness and limitations for nZVI characterisation. These analytical techniques include microscopy and light scattering techniques for the determination of particle size, size distribution and aggregation state, and X-ray techniques for the characterisation of surface chemistry and bulk composition. Ex le characterisation data derived from commercial nZVI materials is used to further illustrate method strengths and limitations. Finally, some important challenges with respect to the characterisation of nZVI in groundwater s les are discussed.
Publisher: Elsevier BV
Date: 07-2019
DOI: 10.1016/J.CHEMOSPHERE.2019.03.170
Abstract: The beneficial role of biochar on improvement of soil quality, C sequestration, and enhancing crop yield is widely reported. As such there is not much consolidated information available linking biochar modulated soil condition improvement and soil nutrient availability on crop yields. The present review paper addresses the above issues by compilation of world literature on biochar and a new dimension is introduced in this review by performing a meta-analysis of published data by using multivariate statistical analysis. Hence this review is a new in its kind and is useful to the broad spectrum of readers. Generally, alkalinity in biochar increases with increase in pyrolysis temperature and majority of the biochar is alkaline in nature except a few which are acidic. The N content in many biochar was reported to be more than 4% as well as less than 0.5%. Poultry litter biochar is a rich source of P (3.12%) and K (7.40%), while paper mill sludge biochar is higher in Ca content (31.1%) and swine solids biochar in Zn (49810 mg kg
Publisher: Elsevier BV
Date: 08-2022
Publisher: Elsevier
Date: 2019
Publisher: Elsevier BV
Date: 05-2023
Publisher: Elsevier BV
Date: 07-2019
DOI: 10.1016/J.JHAZMAT.2019.03.125
Abstract: We studied the sorption of As(V) in single and multi-component (As(V)-Se(VI)) aqueous systems using nanoscale zero-valent iron (nZVI) and nZVI-functionalized zeolite (Z-nZVI) adsorbents. Morphological and physico-chemical characterization of the adsorbents was conducted using X-ray diffraction (XRD), scanning electron microscopy (SEM), surface area and electrophoretic mobility measurements. SEM and XRD analyses showed that Fe-nanoparticle size and crystallinity were better preserved in Z-nZVI than nZVI after As(V) sorption. Highly efficient As(V) removal was achieved for all tested adsorbents with a minimal competition effect of Se(VI). In the single-component system, the equilibrium As(V) sorption time on nZVI and Z-nZVI was 40 and 60 min, respectively, while in the multi-component system, this time was 90 min for both the adsorbents. The Freundlich and pseudo-second-order models provided good fittings for the experimental sorption data (r
Publisher: Elsevier BV
Date: 07-2019
DOI: 10.1016/J.JHAZMAT.2019.03.126
Abstract: Disposal of soil washing effluent (SWE) resulting from the surfactant-enhanced remediation of soil containing hydrophobic organic contaminants (HOCs)is complicated because of the presence of high levels of surfactants. The synthesized layered double hydroxides (LDHs), modified with sodium dodecyl sulfonate (SDS) in different loading amounts (organo-LDHs),were evaluated in this study as sorbents for the removal of two typical HOCs, phenanthrene (PHE) and pyrene (PYR),from a simulative SWE. The results showed that the organo-LDHs can effectively sorb PHE and PYR from the SWE within an equilibrium time of 2 h. All isotherms were linear and the sorption capabilities of the organo-LDHs increased almost linearly with the increase in the amount of SDS loaded on the LDHs. Besides, the surface areas of the organo-LDHs decreased sharply with the increase in SDS loading owing to the hindrance of the exposed surface of the LDHs by the incorporated SDS. These findings indicated that partitioning dominated the sorption process rather than adsorption, and the strong affinity of HOCs towards the organic phase in LDHs assisted in the effective removal of polycyclic aromatic hydrocarbons (PAHs) from the SWE. Furthermore, the sorption capabilities of organo-LDHs towards PHE and PYR at the higher loading amounts of SDS were much greater than that of commercial activated carbon at the higher concentration ranges of PAHs.
Publisher: Elsevier BV
Date: 2018
Publisher: Elsevier BV
Date: 10-2017
Publisher: Elsevier BV
Date: 07-2021
Publisher: Springer Science and Business Media LLC
Date: 15-11-2013
Publisher: Elsevier BV
Date: 07-2019
DOI: 10.1016/J.JHAZMAT.2019.03.135
Abstract: The interactive effects of the types and contents of soil clay fractions (SCFs) and plant-residue addition rates on soil organic carbon (SOC) stabilisation are largely unknown. We conducted incubation experiments by amending a sandy soil s le with kaolinitic-illitic, smectitic and allophanic SCFs and adding wheat residues to the mineral mixtures to compare their C stabilisation capacity. The rate of carbon (C) decomposition was higher in the kaolinitic-illitic SCF followed by smectitic and allophanic clay minerals. The supply of easily degradable C substrate from decomposing residues markedly influenced the SCFs' abilities to stabilise SOC. The removal of sesquioxides from the SCFs significantly decreased their C stabilisation capacity, which coincided with a decrease in the dehydrogenase activity of the mineral-residue mixture. The allophanic SCF showed the least microbial activity and the greatest C stabilisation due to having a higher proportion of micropores (75%). The high C stabilisation capacity of allophanic SCF could also be explained by its high specific surface area (119 m
Publisher: Springer Science and Business Media LLC
Date: 04-01-2018
Publisher: Elsevier BV
Date: 06-2021
Publisher: Elsevier BV
Date: 06-2023
Publisher: Elsevier BV
Date: 11-2015
DOI: 10.1016/J.JHAZMAT.2015.05.009
Abstract: Soils contaminated with a mixture of heavy metals and polycyclic aromatic hydrocarbons (PAHs) pose toxic metal stress to native PAH-degrading microorganisms. Adsorbents such as clay and modified clay minerals can bind the metal and reduce its toxicity to microorganisms. However, in a mixed-contaminated soil, an adsorption process more specific to the metals without affecting the bioavailability of PAHs is desired for effective degradation. Furthermore, the adsorbent should enhance the viability of PAH-degrading microorganisms. A metal-immobilizing organoclay (Arquad(®) 2HT-75-bentonite treated with palmitic acid) (MIOC) able to reduce metal (cadmium (Cd)) toxicity and enhance PAH (phenanthrene) biodegradation was developed and characterized in this study. The MIOC differed considerably from the parent clay in terms of its ability to reduce metal toxicity (MIOC>unmodified bentonite>Arquad-bentonite). The MIOC variably increased the microbial count (10-43%) as well as activities (respiration 3-44% enzymatic activities up to 68%), and simultaneously maintained phenanthrene in bioavailable form in a Cd-phenanthrene mixed-contaminated soil over a 21-day incubation period. This study may lead to a new MIOC-assisted bioremediation technique for PAHs in mixed-contaminated soils.
Publisher: Elsevier BV
Date: 04-2023
Publisher: Elsevier
Date: 2018
Publisher: Elsevier BV
Date: 12-2016
Publisher: Elsevier BV
Date: 04-2021
Publisher: Elsevier BV
Date: 04-2016
Publisher: Elsevier BV
Date: 04-2019
DOI: 10.1016/J.ECOENV.2018.11.090
Abstract: Toxic trace element (TTE) contamination in urban soils may pose potential health risks, especially in cities with previous industrial activities. This study aimed to investigate soil contamination in urban allotments in Sheffield, the uptake of TTEs in autumn and spring sown onions (Allium cepa), and their potential risks on human health via consumption of the crops. Paired soil and plant s les were taken in triplicates from four private allotments to assess potentially elevated levels of lead (Pb), zinc (Zn), copper (Cu), arsenic (As), and chromium (Cr). These elements in soils exceeded the ambient background levels for England. Both Pb and As exceeded some UK and EU soil tolerable limits. Concentration factors (CF) were calculated as the ratio of trace element in the plant as compared to that in the soil, and uptake rates were in the order Zn>Cu>Cr>Pb>As. Concentrations were higher for most TTEs in spring sown onions (SSO), and had significantly higher CF (p < 0.05) for Pb and Cr than autumn sown onions (ASO), whereas the opposite was true for As. Toxic elements in plants did not exceed FAO/WHO intake limits when considering TTE content per plant and consumption rates. Human health risk assessment calculations using target hazard quotients (THQ) and hazard indexes (HI) indicated that consuming onions alone did not pose an immediate health risk.
Publisher: Springer Science and Business Media LLC
Date: 11-05-2018
Publisher: Elsevier BV
Date: 02-2022
DOI: 10.1016/J.ENVPOL.2021.118645
Abstract: Cropland contamination by toxic trace metal (loid)s (TTMs) has attracted increasing attention due to the serious consequential threat to crop quality and human health. Mitigation of plant TTM stress by silica amendment has been proposed recently. However, the relationship between the siliceous structure of phytoliths and TTMs in plants, and the environmental implications of phytolith-occluded trace metal (loid)s (PhytTMs) remain unclear. This study assessed the accumulation of five metal (loid)s, including lead (Pb), zinc (Zn), cadmium (Cd), copper (Cu) and arsenic (As), in the organic tissues and phytoliths of wheat grown in a mixed-TTM contaminated soil under both lightly and heavily contaminated conditions. The results show that the concentrations of plant TTMs and PhytTMs were significantly (p < 0.05) positively correlated, and higher in heavily contaminated wheats than those in lightly contaminated ones. The bio-enrichment factors between phytoliths and organic tissues were higher for As (1.83), Pb (0.27) and Zn (0.30) than for Cd (0.03) and Cu (0.14), implying that As, Pb and Zn were more readily co-precipitated with silicon (Si) in phytolith structures than Cd and Cu. Network analysis of the relationship between soil and plant elements with PhytTMs showed that severe contamination could impact the homeostasis of elements in plants by altering the translocation of TTMs between soils, plants, and phytoliths. The accumulation of TTMs in phytoliths was affected by the capacity of Si deposition in tissues and chelation of TTMs with silica, which could impact the role of PhytTMs in global biogeochemical TTM cycles.
Publisher: Elsevier BV
Date: 2022
DOI: 10.1016/J.ENVINT.2021.106908
Abstract: Antimony (Sb) is introduced into soils, sediments, and aquatic environments from various sources such as weathering of sulfide ores, leaching of mining wastes, and anthropogenic activities. High Sb concentrations are toxic to ecosystems and potentially to public health via the accumulation in food chain. Although Sb is poisonous and carcinogenic to humans, the exact mechanisms causing toxicity still remain unclear. Most studies concerning the remediation of soils and aquatic environments contaminated with Sb have evaluated various amendments that reduce Sb bioavailability and toxicity. However, there is no comprehensive review on the biogeochemistry and transformation of Sb related to its remediation. Therefore, the present review summarizes: (1) the sources of Sb and its geochemical distribution and speciation in soils and aquatic environments, (2) the biogeochemical processes that govern Sb mobilization, bioavailability, toxicity in soils and aquatic environments, and possible threats to human and ecosystem health, and (3) the approaches used to remediate Sb-contaminated soils and water and mitigate potential environmental and health risks. Knowledge gaps and future research needs also are discussed. The review presents up-to-date knowledge about the fate of Sb in soils and aquatic environments and contributes to an important insight into the environmental hazards of Sb. The findings from the review should help to develop innovative and appropriate technologies for controlling Sb bioavailability and toxicity and sustainably managing Sb-polluted soils and water, subsequently minimizing its environmental and human health risks.
Publisher: Elsevier BV
Date: 10-2015
Publisher: Elsevier BV
Date: 02-2021
Publisher: Elsevier BV
Date: 07-2017
Publisher: Elsevier BV
Date: 2021
Publisher: Springer Science and Business Media LLC
Date: 20-08-2017
Publisher: Springer Science and Business Media LLC
Date: 07-03-2012
Publisher: Springer Science and Business Media LLC
Date: 27-09-2021
Publisher: Elsevier
Date: 2020
Publisher: Springer Science and Business Media LLC
Date: 28-03-2017
DOI: 10.1007/S10653-017-9939-0
Abstract: This study investigated the effects of surface functional groups, cation exchange capacity (CEC), surface charge, sesquioxides and specific surface area (SSA) of three soil clay fractions (SCFs) (kaolinite-illite, smectite and allophane) on the retention of dissolved organic carbon (DOC) in soils. Physico-chemical properties of the SCFs before and after removing native carbon and/or sesquioxides were characterised, and the DOC adsorption-desorption tests were conducted by a batch method. Native organic carbon (OC)/sesquioxide removal treatments led to a small change in the CEC values of kaolinite-illite, but significant changes in those of smectite and allophane. The net negative surface charge increased in all s les with an increase in pH indicating their variable charge characteristics. The removal of native OC resulted in a slight increase in the net positive charge on soil clay surfaces, while sesquioxide removal increased the negative charge. Changes in the functional groups on the SCF surfaces contributed to the changes in CEC and zeta potential values. There was a strong relationship (R
Publisher: Elsevier BV
Date: 03-2021
Publisher: Elsevier BV
Date: 10-2022
DOI: 10.1016/J.JCIS.2022.05.050
Abstract: Perfluorooctane sulfonate (PFOS) is a highly persistent contaminant of emerging concern causing harmful effects to human and ecosystem health. In this study, a novel MOF-808 metal-organic framework (MOF) was prepared and evaluated for adsorptive removal of PFOS from aqueous solution. The MOF-808 had high specific surface area (SSA 1610 m
Publisher: Elsevier BV
Date: 12-2020
Publisher: Elsevier BV
Date: 09-2021
Publisher: Elsevier BV
Date: 08-2021
Publisher: Frontiers Media SA
Date: 06-01-2023
DOI: 10.3389/FENVS.2022.1114940
Abstract: Biochar nanoparticles (BC-NP) have attracted significant attention because of their unique environmental behavior, some of which could potentially limit large-scale field application of biochar. Accurate prediction of the fate and transportability of BC-NP in soil matrix is the key to evaluating their environmental influence. This study investigated the effects of soil grain size and environmentally relevant solution chemistry, such as ionic strength (cation concentration, 0.1 mM–50 mM cation type, Na + , and Ca 2+ ), and humic acid (HA 0–10 mg/L), on the transport behavior of BC-NP via systematic column experiments. The transportability of BC-NP in the soil-packed column decreased with decreasing soil grain size and was inversely proportional to soil clay content. At low cation concentrations (0.1–1.0 mM), a considerable proportion of BC-NP (15.95%–67.17%) penetrated the soil columns. Compared with Na + , Ca 2+ inhibited the transportability of BC-NP in the soil through a charge shielding effect. With increasing HA concentration, the transportability of BC-NP increased, likely due to an enhanced repulsion force between BC-NP and soil particles. However, at a high HA concentration (10 mg/L), Ca 2+ bridging reduced the transportability of BC-NP in the soil. Breakthrough curves of BC-NP were explained by the two-site kinetic retention model. The antagonistic effects of ionic strength and HA indicated that the transport behavior of BC-NP in the soil was governed by competitive effects of some environmental factors, including soil grain size, environmental solution chemistry, and natural organic matter content.
Publisher: Elsevier BV
Date: 03-2017
Publisher: Elsevier BV
Date: 06-2023
Publisher: Elsevier BV
Date: 12-2021
Publisher: Wiley
Date: 09-02-2021
Publisher: Wiley
Date: 20-04-2022
DOI: 10.1111/SUM.12808
Abstract: The accumulation of plastics in the soil ecosystem poses an increasing environmental concern worldwide. However, little is known about the effect of plastic concentrations on soil properties and soil biota. In this study, we investigated the effect of low‐density polyethylene (LDPE) microplastics (MPs) on the chemical and microbial properties of agricultural soil using a set of microcosm experiments. The soil was incubated for 100 days with LDPE at concentrations of 0%, 0.1%, 1%, 3%, 5%, and 7% at 25°C with 70% water‐holding capacity. Along with soil chemical analysis, we conducted an analysis of soil microbial properties on the first day and again after 100 days of incubation. LDPE concentrations of ≥1% significantly ( p .05) decreased the pH but increased the electrical conductivity of the soil in comparison with the control (0% LDPE at 100 days). Increasing the LDPE concentration did not affect the soil exchangeable cation content or the available Pb concentration. Firmicutes were the most abundant phyla in the soil on the first day, whereas Proteobacteria, Firmicutes and Actinobacteria became dominant in all treatments after 100 days. An increasing LDPE concentration increased the abundance of Actinobacteria and decreased Proteobacteria. Principal component analysis demonstrated that only 7% LDPE was positively correlated with Actinobacteria, indicating that higher concentrations of LDPE contributed to the growth of this phylum. The findings of this study imply that MP contamination could affect soil chemical properties and microbial activity and that these effects primarily depend on MP concentrations in soil.
Publisher: Elsevier BV
Date: 02-2021
Publisher: Elsevier BV
Date: 05-2021
Publisher: Elsevier BV
Date: 09-2022
DOI: 10.1016/J.CHEMOSPHERE.2022.134942
Abstract: Chromium (Cr) contamination in soil and water poses high toxicity risks to organisms and threatens food and water security worldwide. Biochar has emerged as a promising material for cleaning up Cr contamination owing to biochar's strong capacity to immobilize Cr. This paper synthesizes information on biochar modification for the efficient remediation of Cr contamination in soil and water, and critically reviews mechanisms of Cr adsorption on pristine and modified biochars. Biochar modification methods include physical activation via ball milling or ultraviolet irradiation, chemical activation via magnetization, alkali/acid treatment, nano-fabrication or loading of reductive agents, and biological activation via integrating biochars with microorganisms and their metabolites. Modified biochars often have multi-fold enhancement in Cr adsorption/reduction capacity than pristine biochars. Iron (Fe)-supported magnetic biochars have the most promising Cr removal abilities with high reusability of the biochars. Pre-pyrolysis modification with Fe could load Fe
Publisher: Elsevier
Date: 2020
Publisher: Elsevier BV
Date: 02-2022
Publisher: Elsevier BV
Date: 06-2022
DOI: 10.1016/J.CHEMOSPHERE.2022.134026
Abstract: Microplastics have become a global concern, and soil acts as a major sink for plastic pollution. Due to rapid development of soil microplastics research, various analysis methods have been developed, but require proper consistency and standard procedures. The objective of this study was to appraise a quality assessment concerning soil microplastics from a methodological perspective. Nine studies were selected for the quality assessment exercise based on methodological investigations on soil microplastics and were evaluated based on the adapted Criteria for Reporting and Evaluating Ecotoxicity Data (CRED) method. The highest score obtained by an in idual study was 21 while the lowest was 14, leaving a wide score gap which indicated inconsistency amongst the studies. Criterion with the highest average score of 2.0 was obtained for s le size and data reporting. The lowest average score of 0.89 was for the negative control. In conclusion, the total average scores for all eleven criteria were 1.56. Current quality assessment perceived that there was room for improvement and betterment of quality assurance for studies on microplastics and a form of guideline on methodological aspects of soil microplastics studies. It was suggested that future microplastics studies should methodically include quality assurance/quality control (QA/QC) protocols in every process to ensure that good quality data is produced and applied in the risk assessment process.
Publisher: CRC Press
Date: 07-04-2023
Publisher: Elsevier BV
Date: 06-2021
Publisher: Springer Science and Business Media LLC
Date: 02-2014
Publisher: Elsevier BV
Date: 10-2021
Publisher: Elsevier
Date: 2020
Publisher: Elsevier BV
Date: 03-2023
Publisher: Elsevier BV
Date: 07-2019
DOI: 10.1016/J.JENVMAN.2019.02.044
Abstract: Biochar application has multiple benefits for soil fertility improvement and climate change mitigation. Biochar can act as a source of nutrients and sequester carbon (C) in the soil. The nutrient release capacity of biochar once applied to the soil varies with the composition of the biochar, which is a function of the feedstock type and pyrolysis condition used for biochar production. Biochar has a crucial influence on soil C mineralization, including its positive or negative priming of microorganisms involved in soil C cycling. However, in various cases, biochar application to the soil may cause negative effects in the soil and the wider environment. For instance, biochar may suppress soil nutrient availability and crop productivity due to the reduction in plant nutrient uptake or reduction in soil C mineralization. Biochar application may also negatively affect environmental quality and human health because of harmful compounds such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated dibenzodioxins, and dibenzofurans (PCDD/DF). In this review, we discuss the linkage between biochar composition and function, evaluate the role biochar plays in soil fertility improvement and C sequestration, and discuss regulations and concerns regarding biochar's negative environmental impact. We also summarize advancements in biochar production technologies and discuss future challenges and priorities in biochar research.
Publisher: Elsevier BV
Date: 02-2019
Publisher: Elsevier BV
Date: 04-2017
Publisher: Elsevier BV
Date: 09-2023
Publisher: Wiley
Date: 11-2020
DOI: 10.1111/EJSS.13038
Publisher: BMJ
Date: 11-2020
DOI: 10.1136/BMJOPEN-2020-041485
Abstract: To determine the need for recovery (NFR) among emergency physicians and to identify demographic and occupational characteristics associated with higher NFR scores. Cross-sectional electronic survey. Emergency departments (EDs) (n=112) in the UK and Ireland. Emergency physicians, defined as any registered physician working principally within the ED, responding between June and July 2019. NFR Scale, an 11-item self-administered questionnaire that assesses how work demands affect intershift recovery. The median NFR Score for all 4247 eligible, consented participants with a valid NFR Score was 70.0 (95% CI: 65.5 to 74.5), with an IQR of 45.5–90.0. A linear regression model indicated statistically significant associations between gender, health conditions, type of ED, clinical grade, access to annual and study leave, and time spent working out-of-hours. Groups including male physicians, consultants, general practitioners (GPs) within the ED, those working in paediatric EDs and those with no long-term health condition or disability had a lower NFR Score. After adjusting for these characteristics, the NFR Score increased by 3.7 (95% CI: 0.3 to 7.1) and 6.43 (95% CI: 2.0 to 10.8) for those with difficulty accessing annual and study leave, respectively. Increased percentage of out-of-hours work increased NFR Score almost linearly: 26%–50% out-of-hours work=5.7 (95% CI: 3.1 to 8.4) 51%–75% out-of-hours work=10.3 (95% CI: 7.6 to 13.0) 76%–100% out-of-hours work=14.5 (95% CI: 11.0 to 17.9). Higher NFR scores were observed among emergency physicians than reported in any other profession or population to date. While out-of-hours working is unavoidable, the linear relationship observed suggests that any reduction may result in NFR improvement. Evidence-based strategies to improve well-being such as proportional out-of-hours working and improved access to annual and study leave should be carefully considered and implemented where feasible.
Publisher: Informa UK Limited
Date: 2021
Publisher: CRC Press
Date: 07-04-2023
Publisher: Elsevier BV
Date: 10-2019
DOI: 10.1016/J.CHEMOSPHERE.2019.05.156
Abstract: This study investigated the role of an allochthonous Gram-positive wastewater bacterium (Bacillus sp. KUJM2) selected through rigorous screening, for the removal of potentially toxic elements (PTEs As, Cd, Cu, Ni) and promotion of plant growth under PTE-stress conditions. The dried biomass of the bacterial strain removed PTEs (5 mg L
Publisher: Springer Science and Business Media LLC
Date: 25-05-2018
DOI: 10.1038/S41477-018-0162-5
Abstract: In the version of this Perspective originally published, 'acidification' was incorrectly spelt as 'adification' in Fig. 4. This has now been corrected.
Publisher: Elsevier BV
Date: 04-2019
Publisher: Elsevier BV
Date: 09-2019
Publisher: Elsevier BV
Date: 06-2023
Publisher: Informa UK Limited
Date: 09-10-2018
Publisher: Elsevier BV
Date: 06-2022
DOI: 10.1016/J.ENVRES.2022.112734
Abstract: Microplastics are emerging contaminants and there has been growing concern regarding their impacts on aquatic and terrestrial environments. This review provides a comprehensive overview of the current knowledge regarding the sources, occurrences, fates, and risks associated with microplastic contamination in terrestrial environments. This contamination occurs via multiple sources, including primary microplastics (including synthetic materials) and secondary microplastics (derived from the breakdown of larger plastic particles). Microplastic contamination can have both beneficial and detrimental effects on soil properties. Additionally, microplastics have been shown to interact with a wide array of contaminants, including pesticides, persistent organic pollutants, heavy metals, and antibiotics, and may act as a vector for contaminant transfer in terrestrial environments. Microplastics and their associated chemicals can be transferred through food webs and may accumulate across multiple trophic levels, resulting in potential detrimental health effects for humans and other organisms. Although several studies have focused on the occurrence and impacts of microplastic contamination in marine environments, their sources, fate, transport, and effects in terrestrial environments are less studied and not well understood. Therefore, further research focusing on the fate, transport, and impacts of microplastics in relation to soil properties, polymer composition and forms, and land-use types is needed. The development of standardized and harmonized methods for analyzing microplastics in soil-plant ecosystems is essential. Future work should also consider the many interactions of microplastics with soil quality and ecotoxicological impacts on biota in the context of global environmental change.
Publisher: Elsevier BV
Date: 2016
Publisher: Elsevier BV
Date: 10-2021
Publisher: Elsevier BV
Date: 09-2021
Publisher: Elsevier BV
Date: 07-2021
Publisher: Elsevier BV
Date: 11-2020
Publisher: Springer Science and Business Media LLC
Date: 19-01-2021
Publisher: Elsevier BV
Date: 09-2020
Publisher: Elsevier BV
Date: 03-2018
Publisher: Springer Science and Business Media LLC
Date: 23-08-2023
Publisher: Elsevier BV
Date: 2022
Publisher: Elsevier BV
Date: 02-2020
DOI: 10.1016/J.SCITOTENV.2019.134878
Abstract: Sorption of organic contaminants by biochar greatly affects their bioavailability and fate in soils. Nevertheless, very little information is available regarding the effects of biochar on sorption and desorption of organic contaminants in different soil particle-size fractions. In this study, di-n-butyl phthalate (DBP), a prevalent organic contaminant in agricultural soils, was taken as a model contaminant. The effects of biochar on DBP sorption and desorption in six particle-size fractions (i.e., coarse sand, fine sand, coarse silt, fine silt, clay, and humic acid fractions) of paddy soil were investigated using batch sorption-desorption experiments. A straw-derived biochar with high specific surface area (116 m
Publisher: CRC Press
Date: 03-09-2018
Publisher: Springer Science and Business Media LLC
Date: 25-08-2021
DOI: 10.1007/S10653-020-00677-1
Abstract: The staggering production of rock dusts and quarry by-products of mining activities poses an immense environmental burden that warrants research for value-added recycling of these rock mineral powders (RMP). In this study, an incubation experiment was conducted to determine potassium (K) and micronutrients (Zn, Cu, Fe and Mn) release from a quarry RMP to support plant nutrition. Four different size fractions of the RMP were incubated with organic amendments (cow dung and legume straw) under controlled conditions for 90 days. S les were collected at different intervals (7, 15, 30, 45, 60 and 90 days) for the analysis of available K and micronutrients in the mineral-OM mixtures and leachates. There was a significant ( p .05) increase in pH of leachates from the mineral-OM mixtures. The K release was significantly higher from the finer size fraction of RMP. About 18.7% Zn added as RMP was released during the incubation period. Zn release increased from 4.7 to 23.2% as the particle size of RMP decreased. Similarly, Cu release from RMP increased from 2.9 to 21.6%, with a decrease in the particle size. Fe and Mn recovery from RMP recorded 11.2 and 6.6%, respectively. Combined application of OM and RMP showed significantly higher nutrient release than other treatments. This study indicates that effective blending of RMP with organic amendments could be a potential source of K and micronutrients in agriculture without posing a risk of toxic element contamination to the soil.
Publisher: Springer Singapore
Date: 2017
Publisher: Mary Ann Liebert Inc
Date: 10-03-2019
Abstract: During the past decades, thiosemicarbazones were clinically developed for a variety of diseases, including tuberculosis, viral infections, malaria, and cancer. With regard to malignant diseases, the class of α-N-heterocyclic thiosemicarbazones, and here especially 3-aminopyridine-2-carboxaldehyde thiosemicarbazone (Triapine), was intensively developed in multiple clinical phase I/II trials. Recent Advances: Very recently, two new derivatives, namely COTI-2 and di-2-pyridylketone 4-cyclohexyl-4-methyl-3-thiosemicarbazone (DpC) have entered phase I evaluation. Based on the strong metal-chelating/metal-interacting properties of thiosemicarbazones, interference with the cellular iron (and copper) homeostasis is assumed to play an important role in their biological activity. In this review, we summarize and analyze the data on the interaction of (α-N-heterocyclic) thiosemicarbazones with iron, with the special aim of bridging the current knowledge on their mode of action from chemistry to (cell) biology. In addition, we highlight the difference to classical iron(III) chelators such as desferrioxamine (DFO), which are used for the treatment of iron overload. We want to emphasize that thiosemicarbazones are not solely removing iron from the cells/organism. In contrast, they should be considered as iron-interacting drugs influencing erse biological pathways in a complex and multi-faceted mode of action. Consequently, in addition to the discussion of physicochemical properties (e.g., complex stability, redox activity), this review contains an overview on the ersity of cellular thiosemicarbazone targets and drug resistance mechanisms.
Publisher: Springer International Publishing
Date: 22-11-2022
Publisher: MDPI AG
Date: 05-09-2019
DOI: 10.3390/MA12182858
Abstract: The adsorption of atenolol (AT) from aqueous solutions by Ca-montmorillonite (SAz-2) was investigated in batch studies under different physicochemical conditions. The AT existed in neutral un-dissociated form at pH 10, and was adsorbed on dioctahedral smectite (SAz-2) obeying the Langmuir isotherm with a maximum adsorption capacity of 330 mmol/kg. The kinetic adsorption suggested that both strong and weak adsorption sites existed on SAz-2 and participated in the adsorption mechanisms. The amount of exchangeable cations desorbed from SAz-2 during AT adsorption was linearly correlated with the amounts of adsorbed AT having slopes of 0.43, which implied that a cation exchange based adsorption mechanism was also in place. A comprehensive basal spacing change of SAz-2 was observed after AT adsorption on the clay mineral when tested with or without AT recrystallization. The intercalation of AT into the SAz-2 interlayers did not result in swelling due to the low adsorption capacity of the drug. Prominent interactions between the pharmaceutical molecule and SAz-2 were evidenced by apparent shifts of the infrared absorption bands after adsorption. The interlayer configurations and hydrogen bonding of AT on SAz-2 were also supported by infrared, X-ray diffraction and thermogravimetric analyses. This study suggested that SAz-2 is an excellent material to remove not only AT from pharmaceutical wastewater, but can potentially remove many other β-receptor blocker drugs. The results helped us to understand the possible interlayer configurations and adsorption mechanisms of the drugs on natural clay mineral based adsorbents.
Publisher: Springer Science and Business Media LLC
Date: 04-2020
Publisher: Elsevier BV
Date: 05-2016
Publisher: Elsevier BV
Date: 05-2019
DOI: 10.1016/J.JENVMAN.2019.02.069
Abstract: The focus of this research was to synthesize novel clay-biochar composites by incorporating montmorillonite (MMT) and red earth (RE) clay materials in a municipal solid waste (MSW) biochar for the adsorptive removal of tetracycline (TC) from aqueous media. X-ray Fluorescence Analysis (XRF), Fourier Transform Infrared Spectroscopy (FTIR), Powder X-ray Diffraction (PXRD) and Scanning Electron Microscopy (SEM) were used for the characterization of the synthesized raw biochar (MSW-BC) and clay-biochar composites (MSW-MMT and MSW-RE). Results showed that minute clay particles were dispersed on biochar surfaces. The FTIR bands due to Si-O functional group vibrations in the spectra of the clay-biochar composites provided further evidence for successful composite formation. The kinetic TC adsorption data of MSW-MMT were well fitted to the Elovich model expressing high surface activity of biochar and involvement of multiple mechanisms in the adsorption. The kinetic TC adsorption data of MSW-BC and MSW-RE were fitted to the pseudo second order model indicating dominant contribution of chemisorption mechanism during the adsorption. The adsorption differentiation obtained in the kinetic studies was mainly due to the structure of the combined clay material. The adsorption isotherm data of all the adsorbents were well fitted to the Freundlich model suggesting that the adsorption of TC onto the materials occurred via both physisorption and chemisorption mechanisms. In comparison to the raw biochar and MSW-RE, MSW-MMT exhibited higher TC adsorption capacity. Therefore, MSW-MMT clay-biochar composite could be applied in the remediation of TC antibiotic residues in contaminated aqueous media.
Publisher: Elsevier BV
Date: 04-2020
Publisher: Elsevier BV
Date: 12-2021
Publisher: Springer Science and Business Media LLC
Date: 04-07-2022
DOI: 10.1007/S42773-022-00161-2
Abstract: Removal of antimonite [Sb(III)] from the aquatic environment and reducing its biotoxicity is urgently needed to safeguard environmental and human health. Herein, crawfish shell-derived biochars (CSB), pyrolyzed at 350, 500, and 650 ° C, were used to remediate Sb(III) in aqueous solutions. The adsorption data best fitted to the pseudo-second-order kinetic and Langmuir isotherm models. Biochar produced at 350 ° C (CSB350) showed the highest adsorption capacity (27.7 mg g − 1 ), and the maximum 78% oxidative conversion of Sb(III) to Sb(V). The adsorption results complemented with infrared (FTIR), X-ray photoelectron (XPS), and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy analyses indicated that the adsorption of Sb(III) on CSB involved electrostatic interaction, surface complexation with oxygen-containing functional groups (C = O, O = C–O), π–π coordination with aromatic C = C and C–H groups, and H-bonding with –OH group. Density functional theory calculations verified that surface complexation was the most dominant adsorption mechanism, whilst π–π coordination and H-bonding played a secondary role. Furthermore, electron spin resonance (ESR) and mediated electrochemical reduction/oxidation (MER/MEO) analyses confirmed that Sb(III) oxidation at the biochar surface was governed by persistent free radicals (PFRs) (•O 2 − and •OH) and the electron donating/accepting capacity (EDC/EAC) of biochar. The abundance of preferable surface functional groups, high concentration of PFRs, and high EDC conferred CSB350 the property of an optimal adsorbent/oxidant for Sb(III) removal from water. The encouraging results of this study call for future trials to apply suitable biochar for removing Sb(III) from wastewater at pilot scale and optimize the process.
Publisher: Informa UK Limited
Date: 25-02-2021
Publisher: Springer Science and Business Media LLC
Date: 28-09-2020
Publisher: Elsevier BV
Date: 10-2010
DOI: 10.1016/J.JCIS.2010.06.030
Abstract: Organopalygorskites were synthesised by using dimethyldioctadecylammonium bromide (DMDOA) and cetylpyridinium chloride (CP) with surfactant loadings equivalent to 100% and 200% CEC of the palygorskite. The four organopalygorskites, thus produced, were characterised by Fourier Transform Infrared Spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and zeta potential measurement. FTIR and TGA data demonstrated that higher surfactant loadings as well as long branched chain DMDOA produced highly ordered surfactant conformation. SEM morphological results showed that the organopalygorskites had less entangled fibres than the unmodified palygorskite. The zeta potential values showed positive charge formation on the organopalygorskites surface when they were synthesised with surfactant loadings equivalent to 200% CEC of the palygorskite. The organopalygorskites were tested for adsorption of p-nitrophenol (PNP) with a special focus on the adsorption isotherms. The adsorption data could be fitted with multiple isothermal models indicating that the adsorption was controlled by multiple mechanisms. Sorbent loading rate, initial pH, temperature and ionic strength might all affect the adsorption process. Also, DMDOA modified organopalygorskites reduced desorption/redispersal of adsorbed PNP back into the environment to a great extent. This study will be helpful in designing palygorskite-based organoclay adsorbents for remediating organic environmental contaminants which are ionic in nature.
Publisher: Elsevier BV
Date: 09-2022
DOI: 10.1016/J.ENVPOL.2022.119609
Abstract: Numerous harmful chemicals are introduced every year in the environment through anthropogenic and geological activities raising global concerns of their ecotoxicological effects and decontamination strategies. Biochar technology has been recognized as an important pillar for recycling of biomass, contributing to the carbon capture and bioenergy industries, and remediation of contaminated soil, sediments and water. This paper aims to critically review the application potential of biochar with a special focus on the synergistic and antagonistic effects on contaminant-degrading microorganisms in single and mixed-contaminated systems. Owing to the high specific surface area, porous structure, and compatible surface chemistry, biochar can support the proliferation and activity of contaminant-degrading microorganisms. A combination of biochar and microorganisms to remove a variety of contaminants has gained popularity in recent years alongside traditional chemical and physical remediation technologies. The microbial compatibility of biochar can be improved by optimizing the surface parameters so that toxic pollutant release is minimized, biofilm formation is encouraged, and microbial populations are enhanced. Biocompatible biochar thus shows potential in the bioremediation of organic contaminants by harboring microbial populations, releasing contaminant-degrading enzymes, and protecting beneficial microorganisms from immediate toxicity of surrounding contaminants. This review recommends that biochar-microorganism co-deployment holds a great potential for the removal of contaminants thereby reducing the risk of organic contaminants to human and environmental health.
Publisher: CRC Press
Date: 09-06-2021
Publisher: CRC Press
Date: 08-09-2018
Publisher: Elsevier BV
Date: 02-2020
DOI: 10.1016/J.JHAZMAT.2019.121125
Abstract: Contaminant removal from water involves various technologies among which adsorption is considered to be simple, effective, economical, and sustainable. In recent years, nanocomposites prepared by combining clay minerals and polymers have emerged as a novel technology for cleaning contaminated water. Here, we provide an overview of various types of clay-polymer nanocomposites focusing on their synthesis processes, characteristics, and possible applications in water treatment. By evaluating various mechanisms and factors involved in the decontamination processes, we demonstrate that the nanocomposites can overcome the limitations of in idual polymer and clay components such as poor specificity, pH dependence, particle size sensitivity, and low water wettability. We also discuss different regeneration and wastewater treatment options (e.g., membrane, coagulant, and barrier/columns) using clay-polymer nanocomposites. Finally, we provide an economic analysis of the use of these adsorbents and suggest future research directions.
Publisher: Elsevier BV
Date: 11-2022
DOI: 10.1016/J.ENVPOL.2022.120152
Abstract: Plant-derived saponins are bioactive surfactant compounds that can solubilize organic pollutants in environmental matrices, thereby facilitating pollutant remediation. Externally applied saponin has potential to enhance total petroleum hydrocarbon (TPH) biodegradation in the root zone (rhizosphere) of wild plants, but the associated mechanisms are not well understood. For the first time, this study evaluated a triterpenoid saponin (from red ash leaves, Alphitonia excelsa) in comparison to a synthetic surfactant (Triton X-100) for their effects on plant growth and biodegradation of TPH in the rhizosphere of two native wild species (a grass, Chloris truncata, and a shrub, Hakea prostrata). The addition of Triton X-100 at the highest level (1000 mg/kg) in the polluted soil significantly hindered the plant growth (reduced plant biomass and photosynthesis) and associated rhizosphere microbial activity in both the studied plants. Therefore, TPH removal in the rhizosphere of both plant species treated with the synthetic surfactant was not enhanced (at the lower level, 500 mg/kg soil) and even slightly decreased (at the highest level) compared to that in the surfactant-free (control) treatment. By contrast, TPH removal was significantly increased with saponin application (up to 60% in C. truncata at 1000 mg/kg due to enhanced plant growth and associated rhizosphere microbial activity). No significant difference was observed between the two saponin application levels. Dehydrogenase activity positively correlated with TPH removal (p < 0.001) and thus this parameter could be used as an indicator to predict the rhizoremediation efficiency. This work indicates that saponin-amended rhizoremediation could be an environmentally friendly and effective biological approach to remediate TPH-polluted soils. It was clear that the enhanced plant growth and rhizosphere microbial activity played a crucial role in TPH rhizoremediation efficiency. The saponin-induced molecular processes that promoted plant growth and soil microbial activity in the rhizosphere warrant further studies.
Publisher: Elsevier BV
Date: 09-2015
Publisher: Elsevier BV
Date: 12-2016
Publisher: Elsevier BV
Date: 11-2020
Publisher: Wiley
Date: 21-04-2020
DOI: 10.1111/GCB.15089
Publisher: Springer International Publishing
Date: 03-12-2022
Publisher: CRC Press
Date: 30-07-2020
Publisher: Elsevier
Date: 2023
Publisher: Elsevier BV
Date: 06-2022
DOI: 10.1016/J.CHEMOSPHERE.2022.133891
Abstract: Soil lead (Pb) contamination is often caused by anthropogenic activities. In this study, a pot experiment was conducted to assess the effect of biochars derived from pig-carcass (PCBC) and branches of oriental-plane tree (OPBC) on the bioavailability, redistribution, and phytoavailability of Pb and P, as well as the growth of Ipomoea aquatica Forsk in a Pb-contaminated soil. Application of PCBC increased the total and available P concentrations in the soil as compared to the control, and enhanced the concentrations of labile P and sparingly labile P via direct exogenous P input and improvement of soil pH. Both biochars facilitated P accumulation in plant shoots and roots. Sequential extraction of soil Pb confirmed that biochar application facilitated the transformation of mobile Pb into stable fractions, with greater effects from PCBC than OPBC. Hence, biochar application significantly decreased the soil DTPA-extractable Pb by 90.2% (PCBC) and 64.0% (OPBC) compared to the control, consequently reducing Pb uptake by plants. The Pb immobilization by biochar was driven by the biochar-induced increase of soil pH, Pb-phosphate/carbonate precipitation, ion exchange between Pb
Publisher: Frontiers Media SA
Date: 08-04-2022
Publisher: The Royal Society
Date: 04-08-2021
Abstract: Soil serves as both a ‘source’ and ‘sink’ for contaminants. As a source, contaminants are derived from both ‘geogenic’ and ‘anthropogenic’ origins. Typically, while some of the inorganic contaminants including potentially toxic elements are derived from geogenic origin (e.g. arsenic and selenium) through weathering of parent materials, the majority of organic (e.g. pesticides and microplastics) as well as inorganic (e.g. lead, cadmium) contaminants are derived from anthropogenic origin. As a sink, soil plays a critical role in the transformation of these contaminants and their subsequent transfer to environmental compartments, including groundwater (e.g. pesticides), surface water (phosphate and nitrate), ocean (e.g. microplastics) and atmosphere (e.g. nitrous oxide emission). A complex transformation process of contaminants in soil involving adsorption, precipitation, redox reactions and biodegradation control the mobility, bioavailability and environmental toxicity of these contaminants. Soil also plays a major role in the decontamination of contaminants, and the ‘cleaning’ action of soil is controlled primarily by the physico-chemical interactions of contaminants with various soil components, and the biochemical transformations facilitated by soil microorganisms. In this article, we examine the geogenic and anthropogenic sources of contaminants reaching the soil, and discuss the role of soil in the sequestration and decontamination of contaminants in relation to various physico-chemical and microbial transformation reactions of contaminants with various soil components. Finally, we propose future actions that would help to maintain the role of soils in protecting the environment from contaminants and delivering sustainable development goals. This article is part of the theme issue ‘The role of soils in delivering Nature's Contributions to People’.
Publisher: Elsevier BV
Date: 09-2021
Publisher: Elsevier BV
Date: 05-2022
DOI: 10.1016/J.SCITOTENV.2022.153555
Abstract: Adsorption is the most widely adopted, effective, and reliable treatment process for the removal of inorganic and organic contaminants from wastewater. One of the major issues with the adsorption-treatment process for the removal of contaminants from wastewater streams is the recovery and sustainable management of spent adsorbents. This review focuses on the effectiveness of emerging adsorbents and how the spent adsorbents could be recovered, regenerated, and further managed through reuse or safe disposal. The critical analysis of both conventional and emerging adsorbents on organic and inorganic contaminants in wastewater systems are evaluated. The various recovery and regeneration techniques of spent adsorbents including magnetic separation, filtration, thermal desorption and decomposition, chemical desorption, supercritical fluid desorption, advanced oxidation process and microbial assisted adsorbent regeneration are discussed in detail. The current challenges for the recovery and regeneration of adsorbents and the methodologies used for solving those problems are covered. The spent adsorbents are managed through regeneration for reuse (such as soil amendment, capacitor, catalyst/catalyst support) or safe disposal involving incineration and landfilling. Sustainable management of spent adsorbents, including processes involved in the recovery and regeneration of adsorbents for reuse, is examined in the context of resource recovery and circular economy. Finally, the review ends with the current drawbacks in the recovery and management of the spent adsorbents and the future directions for the economic and environmental feasibility of the system for industrial-scale application.
Publisher: American Chemical Society (ACS)
Date: 15-03-2022
Abstract: Biochar application is a promising strategy for the remediation of contaminated soil, while ensuring sustainable waste management. Biochar remediation of heavy metal (HM)-contaminated soil primarily depends on the properties of the soil, biochar, and HM. The optimum conditions for HM immobilization in biochar-amended soils are site-specific and vary among studies. Therefore, a generalized approach to predict HM immobilization efficiency in biochar-amended soils is required. This study employs machine learning (ML) approaches to predict the HM immobilization efficiency of biochar in biochar-amended soils. The nitrogen content in the biochar (0.3-25.9%) and biochar application rate (0.5-10%) were the two most significant features affecting HM immobilization. Causal analysis showed that the empirical categories for HM immobilization efficiency, in the order of importance, were biochar properties > experimental conditions > soil properties > HM properties. Therefore, this study presents new insights into the effects of biochar properties and soil properties on HM immobilization. This approach can help determine the optimum conditions for enhanced HM immobilization in biochar-amended soils.
Publisher: Elsevier BV
Date: 10-2021
Publisher: Elsevier BV
Date: 02-2022
DOI: 10.1016/J.JCIS.2021.09.109
Abstract: Development of polymeric magnetic adsorbents is a promising approach to obtain efficient treatment of contaminated water. However, the synthesis of magnetic composites involving multiple components frequently involves tedious preparation steps. In the present study, a magnetic chitosan-palygorskite (MCP) nanocomposite was prepared through a straight-forward one pot synthesis approach to evaluate its lead (Pb
Publisher: American Chemical Society (ACS)
Date: 03-01-2022
Publisher: Elsevier BV
Date: 12-2023
Publisher: Elsevier BV
Date: 08-2019
DOI: 10.1016/J.JCIS.2019.04.078
Abstract: As one of the important contaminants in wastewater, Pb(II) becomes a severe public health problem because of its non-biodegradable and persistent nature. In this study, reduced graphene oxide (RGO) prepared using green tea extract was successfully used to remove Pb(II) from aqueous solutions. A 96.6% of Pb(II) was removed at 10 mg/L Pb(II) and 0.4 g/L RGO with pH 4.5 at 30 °C, and the adsorption of Pb(II) by RGO followed pseudo-second-order kinetics. To confirm the removal mechanism, various methods (Transmission Electron Microscopy, Raman spectroscopy and X-ray diffraction) were used to characterize RGO before and after Pb(II) adsorption. The results showed that the surface of RGO after Pb(II) adsorption became rougher, and the interlayer spacing increased from 0.36 nm to 0.40 nm, indicating that Pb(II) was adsorbed on the surface and between the layers of RGO. Finally, the adsorption mechanism of Pb(II) by RGO was proposed, Pb(II) was adsorbed on the surface of RGO via the electrons on the π-bond on RGO and the interaction of Pb(II) with oxygen-containing functional groups, which were supported by the Fourier Transform Infrared and X-ray photoelectron spectroscopy results.
Publisher: Elsevier BV
Date: 04-2018
DOI: 10.1016/J.SCITOTENV.2017.11.214
Abstract: Soil organic carbon is essential to improve soil fertility and ecosystem functioning. Soil microorganisms contribute significantly to the carbon transformation and immobilisation processes. However, microorganisms are sensitive to environmental stresses such as heavy metals. Applying amendments, such as biochar, to contaminated soils can alleviate the metal toxicity and add carbon inputs. In this study, Cd and Pb spiked soils treated with macadamia nutshell biochar (5% w/w) were monitored during a 49days incubation period. Microbial phospholipid fatty acids (PLFAs) were extracted and analysed as biomarkers in order to identify the microbial community composition. Soil properties, metal bioavailability, microbial respiration, and microbial biomass carbon were measured after the incubation period. Microbial carbon use efficiency (CUE) was calculated from the ratio of carbon incorporated into microbial biomass to the carbon mineralised. Total PLFA concentration decreased to a greater extent in metal contaminated soils than uncontaminated soils. Microbial CUE also decreased due to metal toxicity. However, biochar addition alleviated the metal toxicity, and increased total PLFA concentration. Both microbial respiration and biomass carbon increased due to biochar application, and CUE was significantly (p<0.01) higher in biochar treated soils than untreated soils. Heavy metals reduced the microbial carbon sequestration in contaminated soils by negatively influencing the CUE. The improvement of CUE through biochar addition in the contaminated soils could be attributed to the decrease in metal bioavailability, thereby mitigating the biotoxicity to soil microorganisms.
Publisher: CRC Press
Date: 30-07-2020
Publisher: CRC Press
Date: 30-07-2020
Publisher: Elsevier
Date: 2017
Publisher: Springer Science and Business Media LLC
Date: 25-04-2017
DOI: 10.1007/S10653-017-9957-Y
Abstract: Rapid surge of interest for carbon nanotube (CNT) in the last decade has made it an imperative member of nanomaterial family. Because of the distinctive physicochemical properties, CNTs are widely used in a number of scientific applications including plant sciences. This review mainly describes the role of CNT in plant sciences. Contradictory effects of CNT on plants physiology are reported. CNT can act as plant growth inducer causing enhanced plant dry biomass and root/shoot lengths. At the same time, CNT can cause negative effects on plants by forming reactive oxygen species in plant tissues, consequently leading to cell death. Enhanced seed germination with CNT is related to the water uptake process. CNT can be positioned as micro-tubes inside the plant body to enhance the water uptake efficiency. Due to its ability to act as a slow-release fertilizer and plant growth promoter, CNT is transpiring as a novel nano-carbon fertilizer in the field of agricultural sciences. On the other hand, accumulation of CNT in soil can cause deleterious effects on soil microbial ersity, composition and population. It can further modify the balance between plant-toxic metals in soil, thereby enhancing the translocation of heavy metal(loids) into the plant system. The research gaps that need careful attention have been identified in this review.
Publisher: Elsevier BV
Date: 05-2020
Publisher: Elsevier BV
Date: 03-2012
Publisher: Elsevier BV
Date: 2016
DOI: 10.1016/J.CHEMOSPHERE.2015.04.086
Abstract: Ammonia (NH3) volatilization is a major nitrogen (N) loss from the soil, especially under tropical conditions, NH3 volatilization results in low N use efficiency by crops. Incubation experiments were conducted using five soils (pH 5.5-9.0), three N sources such as, urea, di-ammonium phosphate (DAP), and poultry manure (PM) and two biochars such as, poultry litter biochar (PL-BC) and macadamia nut shell biochar (MS-BC). Ammonia volatilization was higher at soil with higher pH (pH exceeding 8) due to the increased hydroxyl ions. Among the N sources, urea recorded the highest NH3 volatilization (151.6 mg kg(-1)soil) followed by PM (124.2 mg kg(-1)soil) and DAP (99 mg kg(-1)soil). Ammonia volatilization was reduced by approximately 70% with PL-BC and MS-BC. The decreased NH3 volatilization with biochars is attributed to multiple mechanisms such as NH3 adsorption/immobilization, and nitrification. Moreover, biochar increased wheat dry weight and N uptake as high as by 24.24% and 76.11%, respectively. This study unravels the immense potential of biochar in decreasing N volatilization from soils and simultaneously improving use efficiency by wheat.
Publisher: Elsevier BV
Date: 02-2018
DOI: 10.1016/J.CHEMOSPHERE.2017.10.118
Abstract: In order to assess whether wastewaters from different industries (winery, abattoir, dairy and municipal) could be used safely to irrigate agricultural crops, a pot experiment in glass house was conducted in a sandy clay loam soil (pH = 6.12) from South Australia. Different concentrations (0, 0.05, 5, 25, 50, 75 and 100%) of the wastewaters diluted in an ordinary tap water were applied to soils sown with sunflower and maize seeds, and the effect of these irrigation treatments were evaluated at the early crop growth stages by recording the biomass yields, plant mineral nutrient contents, and also the soil chemical properties. Results showed that the winery effluent reduced the early growth of maize and sunflower when applied without any dilution, but increased yields of both plants when applied at 25% dilution with tap water. At this dilution of the winery wastewater, 80% more dry shoot yield (DSY) of sunflower and 58% more DSY of maize were obtained in comparison to the application of 100% concentration of the wastewater. Abattoir wastewater showed the highest yields at 100% concentration. Furthermore, municipal effluent did not show any inhibitory effect on both the crops. It was observed that metal contents in both the crops were different due to the application of different wastewaters, but did not exceed any toxic level. This study demonstrated that abattoir wastewater as such, and winery and dairy wastewaters at appropriate dilutions could be used for irrigation in agricultural fields to enhance crop productivity.
Publisher: Frontiers Media SA
Date: 08-05-2019
Publisher: Elsevier BV
Date: 04-2019
DOI: 10.1016/J.JENVMAN.2019.02.006
Abstract: This study investigates the adsorption of ciprofloxacin (CPX) onto a municipal solid waste derived biochar (MSW-BC) and a composite material developed by combining the biochar with bentonite clay. A bentonite-MSW slurry was first prepared at 1:5 ratio (w/w), and then pyrolyzed at 450 °C for 30 min. The composite was characterized by scanning electron microscopy (SEM), Powder X-ray diffraction (PXRD) and Fourier transform infrared (FTIR) spectroscopy before and after CPX adsorption. Batch experiments were conducted to assess the effect of pH, reaction time and adsorbate dosage. The SEM images confirmed successful modification of the biochar with bentonite showing plate like structures. The PXRD patterns showed changes in the crystalline lattice of both MSW-BC and the composite before and after CPX adsorption whereas the FTIR spectra indicated merging and widening of specific bands after CPX adsorption. The optimum CPX adsorption was achieved at pH 6, and the maximum adsorption capacity of the composite calculated via isotherm modeling was 190 mg/g, which was about 40% higher than the pristine MSW-BC. The Hill isotherm model along with pseudo-second order and Elovich kinetic models showed the best fit to the adsorption data. The most plausible mechanism for increased adsorption capacity is the increased active sites of the composites for CPX adsorption through induced electrostatic interactions between the functional groups of the composite and CPX molecules. The added reactive surfaces in the composite because of bentonite incorporation, and the intercalation of CPX in the clay interlayers improved the adsorption of CPX by the biochar-bentonite composite compared to the pristine biochar. Thus, MSW-BC-bentonite composites could be considered as a potential material for remediating pharmaceuticals in aqueous media.
Publisher: Springer Science and Business Media LLC
Date: 12-11-2019
Publisher: MDPI AG
Date: 03-01-2020
DOI: 10.3390/APP10010349
Abstract: The present study shows the potential of an extracellular polymeric substance (EPS) produced by Bacillus licheniformis strain KX657843 isolated from earthworm (Metaphire posthuma) gut in the sorption of Cu(II) and Zn(II) and in flocculation. After harvesting bacterial cells from sucrose supplemented denitrifying culture medium, the EPS was extracted following ethanolic extraction method. The Fourier Transform Infrared Spectroscopy (FTIR) and 1H and 13C Nuclear Magnetic Resonance (NMR) of EPS revealed its functional groups, electronegative constituents, unsaturated carbon, and carbonyl groups. The negatively charged functional groups of carbohydrates and protein moiety of the EPS endowed it with heavy metal binding capacity through electrostatic interactions. The highest flocculation activity (83%) of EPS was observed at 4 mg L−1 and pH 11. The metal sorption by EPS increased with increasing pH. At pH 8, the EPS was able to remove 86 and 81% Cu(II) and Zn(II), respectively, from a 25 mg L−1 metal solution. 94.8% of both the metals at 25 mg L−1 metal solutions were removed by EPS at EPS concentration of 100 mg L−1. From Langmuir isotherm model, the maximum sorption capacities of EPS were calculated to be 58.82 mg g−1 for Cu(II) and 52.45 mg g−1 for Zn(II). The bacterial EPS showed encouraging flocculating and metal sorption properties. The potential to remove Cu(II) and Zn(II) implies that the EPS obtained from the earthworm gut bacteria can be used as an effective agent for environmental remediation of heavy metals and in bioflocculation.
Publisher: Elsevier
Date: 2019
Publisher: ACM
Date: 19-04-2023
Publisher: Elsevier BV
Date: 03-2022
DOI: 10.1016/J.ENVRES.2021.111924
Abstract: This study assessed the ability of phosphorus (P) fertilizer to remediate the rhizosphere of three wild plant species (Banksia seminuda, a tree Chloris truncata, a grass and Hakea prostrata, a shrub) growing in a soil contaminated with total (aliphatic) petroleum hydrocarbon (TPH). Plant growth, photosynthesis (via chlorophyll fluorescence), soil microbial activity, alkane hydroxylase AlkB (aliphatic hydrocarbon-degrading) gene abundance, and TPH removal were evaluated 120 days after planting. Overall, although TPH served as an additional carbon source for soil microorganisms, the presence of TPH in soil resulted in decreased plant growth and photosynthesis. However, growth, photosynthesis, microbial activities, and AlkB gene abundance were enhanced by the application of P fertilizer, thereby increasing TPH removal rates, although the extent and optimum P dosage varied among the plant species. The highest TPH removal (64.66%) was observed in soil planted with the Poaceae species, C. truncata, and amended with 100 mg P kg
Publisher: Springer Science and Business Media LLC
Date: 31-08-2016
DOI: 10.1007/S10653-016-9867-4
Abstract: Metal stabilization using soil amendments is an extensively applied, economically viable and environmentally friendly remediation technique. The stabilization of Pb, Zn and As in contaminated soils was evaluated using natural starfish (NSF) and calcined starfish (CSF) wastes at different application rates (0, 2.5, 5.0 and 10.0 wt%). An incubation study was conducted over 14 months, and the efficiency of stabilization for Pb, Zn and As in soil was evaluated by the toxicity characteristic leaching procedure (TCLP) test. The TCLP-extractable Pb was reduced by 76.3-100 and 91.2-100 % in soil treated with NSF and CSF, respectively. The TCLP-extractable Zn was also reduced by 89.8-100 and 93.2-100 % in soil treated with NSF and CSF, respectively. These reductions could be associated with the increased metal adsorption and the formation of insoluble metal precipitates due to increased soil pH following application of the amendments. However, the TCLP-extractable As was increased in the soil treated with NSF, possibly due to the competitive adsorption of phosphorous. In contrast, the TCLP-extractable As in the 10 % CSF treatment was not detectable because insoluble Ca-As compounds might be formed at high pH values. Thermodynamic modeling by visual MINTEQ predicted the formation of ettringite (Ca
Publisher: CRC Press
Date: 30-07-2020
Publisher: Elsevier BV
Date: 04-2022
DOI: 10.1016/J.JHAZMAT.2021.128117
Abstract: Conventional adsorbents for decontaminating arsenic exhibit low efficacy for the removal of arsenite (As(III)). This study aims to develop a robust As adsorbent from natural magnetite (M
Publisher: Elsevier BV
Date: 03-2016
Publisher: Springer Science and Business Media LLC
Date: 02-11-2021
Publisher: Elsevier BV
Date: 03-2021
Publisher: Elsevier BV
Date: 12-2010
DOI: 10.1016/J.JHAZMAT.2010.08.055
Abstract: Despite their widespread use in household activities and various industries, information on the toxicity of quaternary ammonium compounds (QACs) to microbial activities in soil is scant. This study investigated the effect of three commonly used QACs namely hexadecyltrimethyl ammonium bromide (HDTMA), octadecyltrimethyl ammonium bromide (ODTMA) and Arquad on dehydrogenase and potential nitrification activities in three different soils. The toxicity of QACs on the dehydrogenase activity and potential nitrification in these soils followed the order: HDTMA>ODTMA>Arquad and Arquad>HDTMA>ODTMA, respectively. HDTMA, ODTMA and Arquad exhibited toxicity to dehydrogenase activity at concentration of 50, 100 and 750 mg kg(-1) soil, respectively, whereas potential nitrification was inhibited by HDTMA and ODTMA even at 50 mg kg(-1) soil. Arquad exhibited toxicity to potential nitrification at comparatively higher concentration of 250 mg kg(-1) soil, with the severity of toxicity very intense at higher concentrations. The nature of QACs and soil properties influenced the toxicity. The toxic effect of QACs on soil microbial activities was more influenced by the relative release of sorbed QACs in soils. This study provides valuable information on the toxicological properties of some widely used QACs on important soil microbial activity parameters. To our knowledge, this is the first report.
Publisher: Elsevier BV
Date: 02-2020
DOI: 10.1016/J.JHAZMAT.2019.121301
Abstract: Halloysite nanoclay was utilized to retain aqueous oxytetracycline (OTC) which is extensively used in the veterinary industry. The micro-structure and functionality of the nanoclay were characterized through spectroscopic techniques before and after adsorption. The OTC removal experiments were performed at different pH conditions (pH 3.0-9.0), ionic strengths (0.001, 0.01, 0.1 M NaNO
Publisher: Informa UK Limited
Date: 26-06-2019
Publisher: Wiley
Date: 20-04-2020
DOI: 10.1111/SUM.12589
Publisher: Elsevier
Date: 2019
Publisher: Springer India
Date: 06-12-2014
Publisher: Elsevier BV
Date: 08-2023
Publisher: Elsevier BV
Date: 05-2022
Publisher: Elsevier BV
Date: 12-2016
Publisher: Elsevier BV
Date: 2021
Publisher: Springer Science and Business Media LLC
Date: 21-03-2023
Publisher: Elsevier BV
Date: 10-2023
Publisher: Elsevier BV
Date: 04-2021
Publisher: Elsevier BV
Date: 2021
Publisher: Springer Science and Business Media LLC
Date: 24-03-2022
DOI: 10.1007/S42773-022-00148-Z
Abstract: There has been more than 75% rise in the number of extreme weather events such as drought and flood during 2000–2019 compared to 1980–1999 due to the adverse effects of climate change, causing significant deterioration of the soil and water quality. Simultaneously, the growing human population has been exerting pressure on available water and soil resources due to overuse or unplanned use. While greenhouse gas emissions have intensified, the fertility of agricultural soils has declined globally due to the exposure of soils to frequent flooding, desertification, and salinization (resulting from extreme weather events). The current review aims to give an overview of damages caused to the soil–plant system by extreme weather events and provide a perspective on how biochar can repair the damaged system. Biochar is known to improve soil fertility, increase crop productivity and mitigate greenhouse gas emissions via sustainable recycling of bio-waste. Beneficial properties of biochar such as alkaline pH, high cation exchange capacity, abundant surface functional groups, remarkable surface area, adequate porosity, excellent water holding capacity, and sufficient nutrient retention capacity can help repair the adverse effects of extreme weather events in the soil–plant system. This paper recommends some cautious future approaches that can propel biochar’s use in improving the soil–plant systems and promoting sustainable functioning of extreme weather-affected areas via mitigation of the adverse effects.
Publisher: Elsevier
Date: 2018
Publisher: Wiley
Date: 08-07-2008
Publisher: Informa UK Limited
Date: 07-05-2022
Publisher: Elsevier BV
Date: 08-2019
DOI: 10.1016/J.JHAZMAT.2019.05.025
Abstract: Nitrate (NO
Publisher: Elsevier BV
Date: 06-2023
Publisher: Elsevier BV
Date: 05-2022
DOI: 10.1016/J.SCITOTENV.2022.153461
Abstract: Fast weathering of parent materials and rapid mineralization of organic matter because of prevalent climatic conditions, and subsequent development of acidity and loss/exhaustion of nutrient elements due to intensive agricultural practices have resulted in the degradation of soil fertility and productivity in the vast tropical areas of the world. There is an urgent need for rejuvenation of weathered tropical soils to improve crop productivity and sustainability. For this purpose, biochar has been found to be more effective than other organic soil amendments due to biochar's stability in soil, and thus can extend the benefits over long duration. This review synthesizes information concerning the present status of biochar application in highly weathered tropical soils highlighting promising application strategies for improving resource use efficiency in terms of economic feasibility. In this respect, biochar has been found to improve crop productivity and soil quality consistently through liming and fertilization effects in low pH and infertile soils under low-input conditions typical of weathered tropical soils. This paper identifies several advance strategies that can maximize the effectiveness of biochar application in weathered tropical soils. However, strategies for the reduction of costs of biochar production and application to increase the material's use efficiency need future development. At the same time, policy decision by linking economic benefits with social and environmental issues is necessary for successful implementation of biochar technology in weathered tropical soils. This review recommends that advanced biochar strategies hold potential for sustaining soil quality and agricultural productivity in tropical soils.
Publisher: Elsevier BV
Date: 04-2018
DOI: 10.1016/J.ECOENV.2018.01.018
Abstract: The effect of humic substances (HS) and their different fractions (humic acids (HA) and hymatomelanic acids (HMA)) on the toxicity of zinc and lead to different strains of bacteria was studied. All tested bacteria demonstrated a lower resistance to zinc than lead showing minimum inhibitory concentrations of 0.1 - 0.3mM and 0.3-0.5mM, respectively. The highest resistance to lead was characteristic of Pseudomonas chlororaphis PCL1391 and Rhodococcus RS67, while Pseudomonas chlororaphis PCL1391 showed the greatest resistance to zinc. The combined fractions of HS and HA alone reduced zinc toxicity at all added concentrations of the organic substances (50 - 200mgL
Publisher: Elsevier
Date: 2020
Publisher: Elsevier BV
Date: 04-2019
Publisher: Springer Singapore
Date: 2017
Publisher: Elsevier BV
Date: 03-2022
DOI: 10.1016/J.ENVRES.2021.112125
Abstract: Hexavalent chromium (Cr[VI]) is one of the major environmental concerns due to its excessive discharge through effluents from the leather tanning industry. Peanut production leads to the generation of residual shells as waste calling for sustainable disposal. In this study, we employed an innovative approach of applying peanut-shell-derived pristine and engineered biochar for the remediation of Cr-contaminated wastewater and soil. The peanut shell waste was converted to biochar, which was further engineered with cetyltrimethylammonium bromide (CTAB, a commonly used cationic surfactant). The biochars were then used for the adsorption and immobilization of Cr(VI) in water and soil, respectively. The adsorption experiments demonstrated high Cr(VI) removal efficiency for the engineered biochar (79.35%) compared with the pristine biochar (37.47%). The Langmuir model best described the Cr(VI) adsorption onto the biochars (R
Publisher: Springer Science and Business Media LLC
Date: 08-07-2020
Publisher: Springer Singapore
Date: 2017
Publisher: Elsevier BV
Date: 06-2017
Publisher: Springer Science and Business Media LLC
Date: 15-09-2023
Publisher: Elsevier BV
Date: 04-2016
DOI: 10.1016/J.SCITOTENV.2016.01.164
Abstract: Co-contamination of soil and water with polycyclic aromatic hydrocarbon (PAH) and heavy metals makes biodegradation of the former extremely challenging. Modified clay-modulated microbial degradation provides a novel insight in addressing this issue. This study was conducted to evaluate the growth and phenanthrene degradation performance of Mycobacterium gilvum VF1 in the presence of a palmitic acid (PA)-grafted Arquad® 2HT-75-based organobentonite in cadmium (Cd)-phenanthrene co-contaminated water. The PA-grafted organobentonite (ABP) adsorbed a slightly greater quantity of Cd than bentonite at up to 30mgL(-1) metal concentration, but its highly negative surface charge imparted by carboxylic groups indicated the potential of being a significantly superior adsorbent of Cd at higher metal concentrations. In systems co-contained with Cd (5 and 10mgL(-1)), the Arquad® 2HT-75-modified bentonite (AB) and PA-grafted organobentonite (ABP) resulted in a significantly higher (72-78%) degradation of phenanthrene than bentonite (62%) by the bacterium. The growth and proliferation of bacteria were supported by ABP which not only eliminated Cd toxicity through adsorption but also created a congenial microenvironment for bacterial survival. The macromolecules produced during ABP-bacteria interaction could form a stable clay-bacterial cluster by overcoming the electrostatic repulsion among in idual components. Findings of this study provide new insights for designing clay modulated PAH bioremediation technologies in mixed-contaminated water and soil.
Publisher: Elsevier BV
Date: 08-2023
Publisher: Elsevier BV
Date: 12-2015
DOI: 10.1016/J.ENVINT.2015.09.017
Abstract: Bioremediation is an effective strategy for cleaning up organic contaminants, such as polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs). Advanced bioremediation implies that biotic agents are more efficient in degrading the contaminants completely. Bioremediation by microbial degradation is often employed and to make this process efficient, natural and cost-effective materials can serve as supportive matrices. Clay/modified clay minerals are effective adsorbents of PAHs/VOCs, and readily available substrate and habitat for microorganisms in the natural soil and sediment. However, the mechanism underpinning clay-mediated biodegradation of organic compounds is often unclear, and this requires critical investigation. This review describes the role of clay/modified clay minerals in hydrocarbon bioremediation through interaction with microbial agents in specific scenarios. The vision is on a faster, more efficient and cost-effective bioremediation technique using clay-based products. This review also proposes future research directions in the field of clay modulated microbial degradation of hydrocarbons.
Publisher: Malaysian Institute of Chemistry
Date: 29-06-2023
Publisher: Elsevier BV
Date: 12-2016
Location: Germany
Location: United Kingdom of Great Britain and Northern Ireland
Location: United Kingdom of Great Britain and Northern Ireland
No related grants have been discovered for Binoy Sarkar.