ORCID Profile
0000-0003-4800-1910
Current Organisations
RMIT University
,
University College London
,
University of South Australia
,
University of Adelaide
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: American Chemical Society (ACS)
Date: 25-08-2023
Publisher: MDPI AG
Date: 15-02-2023
DOI: 10.3390/NANO13040738
Abstract: Membrane fouling is a major drawback in the membrane filtration industry for water treatment. Mixed-matrix membranes (MMMs) are well known for their enhanced antifouling and antibacterial properties, which could offer potential benefits for membrane filtration processes in the water treatment field. In this work, three electrospun nanofibrous MMMs (P, CP, and MCP, which were, respectively, the pristine polysulfone membrane and mixed-matrix membranes (MMMs) consisting of GO–ZnO and GO–ZnO–iron oxides) were studied for antifouling and antibacterial properties with respect to the arsenic nanofiltration process. The effects of these composites on the antifouling behaviour of the membranes were studied by characterising the bovine serum albumin (BSA) protein adsorption on the membranes and subsequent analysis using microscopic (morphology via scanning electron microscopy) and Brunauer–Emmett–Teller (BET) analyses. The antibacterial properties of these membranes were also studied against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli). The composite nanoparticle-incorporated membranes showed improved antifouling properties in comparison with the pristine polysulfone (PSF) membrane. The excellent antimicrobial properties of these membranes make them appropriate candidates to contribute to or overcome biofouling issues in water or wastewater treatment applications.
Publisher: American Chemical Society (ACS)
Date: 21-06-2021
Abstract: Magnesium (Mg) and its alloys are promising biodegradable metallic implant materials. However, their clinical applications are limited by their fast corrosion rate in the biological environment. In this work, with an outlook to improve the
Publisher: American Chemical Society (ACS)
Date: 24-11-2020
Abstract: Resilin-like polypeptides (RLPs) are an important class of intrinsically disordered multistimuli-responsive bioelastomers. The nanostructure of RLPs in solution has been extensively studied in the past few years, from dilute to molecular crowding conditions, and with the addition of rigid biopolymers. Modification of the hierarchical network structure of RLP hydrogels using graphene oxide (GO) as an additive is a burgeoning prospect for their application in the bioelectronic and biomedical fields. In this work, we systemically study the influence of incorporating GO into RLP (Rec1) hydrogels for tuning their physicochemical properties and understanding the gel-cell interactions. The nature of GO interaction with the Rec1 hydrogel is deduced from the change in structure and properties. Contrast-matching small-angle and ultra-small-angle neutron-scattering techniques were used to investigate the network structure of the Rec1 hydrogel and how this structure is modified in the presence of GO. Incorporation of GO in the Rec1 hydrogel matrix results in an increase in the micromechanical resilience, equilibrium water swelling ratio, micropore size, cross-linked domain size with a decrease in the cross-link density, mass fractal cluster size, local compressive elastic modulus, and cell inert characteristics. These property combinations achieved with the addition of GO further open up the available structure-property design window for RLP applications.
Publisher: MDPI AG
Date: 06-07-2020
DOI: 10.3390/NANO10071323
Abstract: Arsenic (As) removal is of major significance because inorganic arsenic is highly toxic to all life forms, is a confirmed carcinogen, and is of significant environmental concern. As contamination in drinking water alone threatens more than 150 million people all over the world. Therefore, several conventional methods such as oxidation, coagulation, adsorption, etc., have been implemented for As removal, but due to their cost-maintenance limitations there is a drive for advanced, low cost nanofiltration membrane-based technology. Thus, in order to address the increasing demand of fresh and drinking water, this review focuses on advanced nanofiltration (NF) strategy for As removal to safeguard water security. The review concentrates on different types of NF membranes, membrane fabrication processes, and their mechanism and efficiency of performance for removing As from contaminated water. The article provides an overview of the current status of polymer-, polymer composite-, and polymer nanocomposite-based NF membranes, to assess the status of nanomaterial-facilitated NF membranes and to incite progress in this area. Finally, future perspectives and future trends are highlighted.
Publisher: MDPI AG
Date: 28-02-2021
Abstract: The use of additive manufacturing (AM) has moved well beyond prototyping and has been established as a highly versatile manufacturing method with demonstrated potential to completely transform traditional manufacturing in the future. In this paper, a comprehensive review and critical analyses of the recent advances and achievements in the field of different AM processes for polymers, their composites and nanocomposites, elastomers and multi materials, shape memory polymers and thermo-responsive materials are presented. Moreover, their applications in different fields such as bio-medical, electronics, textiles, and aerospace industries are also discussed. We conclude the article with an account of further research needs and future perspectives of AM process with polymeric materials.
Publisher: MDPI AG
Date: 12-05-2022
Abstract: In recent years, significant attention has been paid towards the study and application of mixed matrix nanofibrous membranes for water treatment. The focus of this study is to develop and characterize functional polysulfone (PSf)-based composite nanofiltration (NF) membranes comprising two different oxides, such as graphene oxide (GO) and zinc oxide (ZnO) for arsenic removal from water. PSf/GO- and PSf/ZnO-mixed matrix NF membranes were fabricated using the electrospinning technique, and subsequently examined for their physicochemical properties and evaluated for their performance for arsenite–As(III) and arsenate–As(V) rejection. The effect of GO and ZnO on the morphology, hierarchical structure, and hydrophilicity of fabricated membranes was studied using a scanning electron microscope (SEM), small and ultra-small angle neutron scattering (USANS and SANS), contact angle, zeta potential, and BET (Brunauer, Emmett and Teller) surface area analysis. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used to study the elemental compositions and polymer-oxide interaction in the membranes. The incorporation of GO and ZnO in PSf matrix reduced the fiber diameter but increased the porosity, hydrophilicity, and surface negative charge of the membranes. Among five membrane systems, PSf with 1% ZnO has the highest water permeability of 13, 13 and 11 L h−1 m−2 bar−1 for pure water, As(III), and As(V)-contaminated water, respectively. The composite NF membranes of PSf and ZnO exhibited enhanced (more than twice) arsenite removal (at 5 bar pressure) of 71% as compared to pristine PSf membranes, at 43%, whereas both membranes showed only a 27% removal for arsenate.
Publisher: American Chemical Society (ACS)
Date: 14-02-2019
Abstract: The electrocatalyst layer (ECL) of the proton-exchange membrane fuel cell (PEMFC) is commonly fabricated from colloidal catalyst ink containing carbon-supported catalyst nanoparticles (NPs), ionomer stabilizer, and dispersion medium (DM). The structure, stability, and aggregate size distribution of fuel cell catalyst ink are critically dependent on the quality of DM. However, understanding of the influence of the quality of DM on the hierarchical structure of the ECL is lacking. This work presents a systematic investigation of the effects of reducing alcohol content in isopropyl alcohol/water (IPA/H
Publisher: MDPI AG
Date: 02-02-2021
Abstract: Electrically conductive hydrogels (ECHs), an emerging class of biomaterials, have garnered tremendous attention due to their potential for a wide variety of biomedical applications, from tissue-engineered scaffolds to smart bioelectronics. Along with the development of new hydrogel systems, 3D printing of such ECHs is one of the most advanced approaches towards rapid fabrication of future biomedical implants and devices with versatile designs and tuneable functionalities. In this review, an overview of the state-of-the-art 3D printed ECHs comprising conductive polymers (polythiophene, polyaniline and polypyrrole) and/or conductive fillers (graphene, MXenes and liquid metals) is provided, with an insight into mechanisms of electrical conductivity and design considerations for tuneable physiochemical properties and biocompatibility. Recent advances in the formulation of 3D printable bioinks and their practical applications are discussed current challenges and limitations of 3D printing of ECHs are identified new 3D printing-based hybrid methods for selective deposition and fabrication of controlled nanostructures are highlighted and finally, future directions are proposed.
Publisher: American Chemical Society (ACS)
Date: 05-11-2020
Publisher: MDPI AG
Date: 23-07-2021
DOI: 10.3390/MEMBRANES11080557
Abstract: In recent years, technology for the fabrication of mixed-matrix membranes has received significant research interest due to the widespread use of mixed-matrix membranes (MMMs) for various separation processes, as well as biomedical applications. MMMs possess a wide range of properties, including selectivity, good permeability of desired liquid or gas, antifouling behavior, and desired mechanical strength, which makes them preferable for research nowadays. However, these properties of MMMs are due to their tailored and designed structure, which is possible due to a fabrication process with controlled fabrication parameters and a choice of appropriate materials, such as a polymer matrix with dispersed nanoparticulates based on a typical application. Therefore, several conventional fabrication methods such as a phase-inversion process, interfacial polymerization, co-casting, coating, electrospinning, etc., have been implemented for MMM preparation, and there is a drive for continuous modification of advanced, easy, and economic MMM fabrication technology for industrial-, small-, and bulk-scale production. This review focuses on different MMM fabrication processes and the importance of various parameter controls and membrane efficiency, as well as tackling membrane fouling with the use of nanomaterials in MMMs. Finally, future challenges and outlooks are highlighted.
Publisher: MDPI AG
Date: 21-02-2022
DOI: 10.3390/SU14042459
Abstract: Magnesium alloys are next generation biodegradable implants for clinical applications. However, their medical applications are currently h ered by their rapid corrosion rate in the physiological environment. To overcome such limitations, we have applied a novel layer-by-layer engineering approach of introducing anodization-induced microrough oxidized surface on ZK60 magnesium alloy, followed by surface mineralization with natural calcium apatite (hydroxyapatite, HA), and surface coating with natural protein (silk fibroin, SF) which, effectively reduces corrosion and degradation rate of ZK60 in simulated body fluid. Anodization of ZK60 improved the surface adhesion strength of HA layer HA layer increased the surface roughness, hydrophilicity and micro-hardness, whereas decreased ionic release SF layer decreased surface microroughness and hydrophilicity, whereas improved the stability of HA layer. The SF + HA coating on anodized ZK60 effectively decreased the in vitro weight loss (degradation) by almost six times, whereas corrosion rate by more than two orders in magnitude. Such interfacial coatings, with biocompatible SF on the outer surface, could potentially expand the application of ZK60 in the field of biomedical engineering.
Publisher: American Chemical Society (ACS)
Date: 23-04-2021
Publisher: Wiley
Date: 02-11-2018
DOI: 10.1111/CDOE.12348
Abstract: To use recent national survey data to compare dentition status and oral diseases in China and New Zealand (NZ), with a particular focus on differences by sex and education level. We undertook secondary analysis of representative data from oral health surveys conducted in 2009 in Sichuan (China) and NZ. Both surveys had an oral examination component and collected detailed demographic data. Socioeconomic position in this analysis was represented by the highest level of education completed. Participants were allocated to 1 of 3 comparable ordinal categories of years of education (primary, middle or tertiary). Analyses used survey weights. The proportion of Chinese who had been educated to only primary level was 3 times higher than that among their NZ counterparts, and the proportion with a tertiary education was correspondingly lower. In the 35-44 age group, the dentate proportions were similar, although the mean number of teeth was higher in China than in NZ. There were substantial differences in dental caries experience, with the mean DMFT in NZ being almost 3 times that observed in China. New Zealanders had more filled teeth, but the prevalence of 1+ missing teeth was lower. Periodontitis was more common in the NZ s le than in the Chinese one, although the extent of bleeding on probing was almost 3 times higher among the latter. For the 65-74 age group, there were significant differences in dentition status, with greater tooth retention among Chinese people. There were also significant differences in dental caries experience, with Chinese 65- to 74-year-olds having more decayed teeth but fewer filled or missing teeth, and lower DMFT scores, on average. Periodontal health was better among the New Zealanders. There were notable differences by sex and education level. The differences observed in this study provide strong support for using broader sociocultural models of oral health.
Publisher: European Respiratory Society (ERS)
Date: 18-03-2021
Publisher: MDPI AG
Date: 29-10-2019
DOI: 10.3390/BIOS9040128
Abstract: Herein we report the first ex le of a facile biomineralization process to produce ultra-small-sized highly fluorescent aqueous dispersions of platinum noble metal quantum clusters (Pt-NMQCs) using a multi-stimulus responsive, biomimetic intrinsically disordered protein (IDP), Rec1-resilin. We demonstrate that Rec1-resilin acts concurrently as the host, reducing agent, and stabilizer of the blue-green fluorescent Pt-NMQCs once they are being formed. The photophysical properties, quantum yield, and fluorescence lifetime measurements of the synthesized Pt-NMQCs were examined using UV-Vis and fluorescence spectroscopy. The oxidation state of the Pt-NMQCs was quantitatively analyzed using X-ray photoelectron spectroscopy. Both a small angle X-ray scattering technique and a modeling approach have been attempted to present a detailed understanding of the structure and conformational dynamics of Rec1-resilin as an IDP during the formation of the Pt-NMQCs. It has been demonstrated that the green fluorescent Pt-NMQCs exhibit a high quantum yield of ~7.0% and a lifetime of ~9.5 ns in aqueous media. The change in photoluminescence properties due to the inter-dot interactions between proximal dots and aggregation of the Pt-NMQCs by evaporation was also measured spectroscopically and discussed.
Publisher: American Chemical Society (ACS)
Date: 11-01-2023
Publisher: American Chemical Society (ACS)
Date: 23-01-2020
Publisher: MDPI AG
Date: 18-09-2021
DOI: 10.3390/GELS7030148
Abstract: Polyelectrolyte gels are an important class of polymer gels and a versatile platform with charged polymer networks with ionisable groups. They have drawn significant recent attention as a class of smart material and have demonstrated potential for a variety of applications. This review begins with the fundamentals of polyelectrolyte gels, which encompass various classifications (i.e., origin, charge, shape) and crucial aspects (ionic conductivity and stimuli responsiveness). It further centralises recent developments of polyelectrolyte gels, emphasising their synthesis, structure–property relationships and responsive properties. Sequentially, this review demonstrates how polyelectrolyte gels’ flourishing properties create attractiveness to a range of applications including tissue engineering, drug delivery, actuators and bioelectronics. Finally, the review outlines the indisputable appeal, further improvements and emerging trends in polyelectrolyte gels.
Publisher: Springer Science and Business Media LLC
Date: 08-01-2021
DOI: 10.1038/S41467-020-20375-X
Abstract: Intrinsically disordered proteins have dramatically changed the structure–function paradigm of proteins in the 21 st century. Resilin is a native elastic insect protein, which features intrinsically disordered structure, unusual multi-stimuli responsiveness and outstanding resilience. Advances in computational techniques, polypeptide synthesis methods and modular protein engineering routines have led to the development of novel resilin-like polypeptides (RLPs) including modular RLPs, expanding their applications in tissue engineering, drug delivery, bioimaging, biosensors, catalysis and bioelectronics. However, how the responsive behaviour of RLPs is encoded in the amino acid sequence level remains elusive. This review summarises the milestones of RLPs, and discusses the development of modular RLP-based biomaterials, their current applications, challenges and future perspectives. A perspective of future research is that sequence and responsiveness profiling of RLPs can provide a new platform for the design and development of new modular RLP-based biomaterials with programmable structure, properties and functions.
Publisher: MDPI AG
Date: 08-11-2022
Abstract: Plastic waste pollution, including non-biodegradable landfills, leaching of toxic chemicals into soil and waterways, and emission of toxic gases into the atmosphere, is significantly affecting our environment. Conventional plastic waste recycling approaches generally produce lower value materials compared to the original plastic or recover inefficient heat energy. Lately, upcycling or the valorization approach has emerged as a sustainable solution to transform plastic waste into value-added products. In this review, we present an overview of recent advancements in plastic waste upcycling, such as vitrimerization, nanocomposite fabrication, additive manufacturing, catalytic transformation, and industrial biotechnology, envisaged with technical challenges, future developments, and new circular economy opportunities.
Publisher: American Chemical Society (ACS)
Date: 30-08-2021
Publisher: BMJ
Date: 2022
DOI: 10.1136/BMJGH-2020-004512
Abstract: Female genital mutilation (FGM) is a traditional harmful practice affecting 200 million women and girls globally. Health complications of FGM occur immediately and over time, and are associated with healthcare costs that are poorly understood. Quantifying the global FGM-related burden is essential for supporting programmes and policies for prevention and mitigation. Health complications of FGM are derived from a meta-analysis and stratified by acute, uro-gynaecological, obstetric and psychological/sexual. Treatment costs are calculated from national cohort models of 27 high-burden countries over 30 years. Savings associated with full artial abandonment are compared with a current incidence reference scenario, assuming no changes in FGM practices. Our model projects an increasing burden of FGM due to population growth. As a reference scenario assuming no change in practices, prevalent cases in 27 countries will rise from 119.4 million (2018) to 205.8 million (2047). Full abandonment could reduce this to 80.0 million (2047), while partial abandonment is insufficient to reduce cases. Current incidence economic burden is US$1.4 billion/year, rising to US$2.1 billion/year in 2047. Full abandonment would reduce the future burden to US$0.8 billion/year by 2047. FGM is a human rights violation, a public health issue and a substantial economic burden that can be avoided through effective prevention strategies. While decreasing trends are observed in some countries, these trends are variable and not consistently observed across settings. Additional resources are needed to prevent FGM to avoid human suffering and growing costs. The findings of this study warrant increased political commitment and investment in the abandonment of FGM.
Publisher: Royal Society of Chemistry (RSC)
Date: 2023
DOI: 10.1039/D2YA00298A
Abstract: The surface of pristine graphene is engineered toward hydrophilicity by interfacing with hiphilic PTEBS molecules, creating a new class of water-redispersible graphene with high conductivity and electrocatalytic activity for energy applications.
Publisher: National Institute for Health and Care Research
Date: 04-2021
DOI: 10.3310/EME08050
Abstract: Tuberculosis (TB) is a devastating disease for which new diagnostic tests are desperately needed. To validate promising new technologies [namely whole-blood transcriptomics, proteomics, flow cytometry and quantitative reverse transcription-polymerase chain reaction (qRT-PCR)] and existing signatures for the detection of active TB in s les obtained from in iduals with suspected active TB. Four substudies, each of which used s les from the biobank collected as part of the interferon gamma release assay (IGRA) in the Diagnostic Evaluation of Active TB study, which was a prospective cohort of patients recruited with suspected TB. Secondary care. Adults aged ≥ 16 years presenting as inpatients or outpatients at 12 NHS hospital trusts in London, Slough, Oxford, Leicester and Birmingham, with suspected active TB. New tests using genome-wide gene expression microarray (transcriptomics), surface-enhanced laser desorption ionisation time-of-flight mass spectrometry/liquid chromatography–mass spectrometry (proteomics), flow cytometry or qRT-PCR. Area under the curve (AUC), sensitivity and specificity were calculated to determine diagnostic accuracy. Positive and negative predictive values were calculated in some cases. A decision tree model was developed to calculate the incremental costs and quality-adjusted life-years of changing from current practice to using the novels tests. The project, and four substudies that assessed the previously published signatures, measured each of the new technologies and performed a health economic analysis in which the best-performing tests were evaluated for cost-effectiveness. The diagnostic accuracy of the transcriptomic tests ranged from an AUC of 0.81 to 0.84 for detecting all TB in our cohort. The performance for detecting culture-confirmed TB or pulmonary TB was better than for highly probable TB or extrapulmonary tuberculosis (EPTB), but was not high enough to be clinically useful. None of the previously described serum proteomic signatures for active TB provided good diagnostic accuracy, nor did the candidate rule-out tests. Four out of six previously described cellular immune signatures provided a reasonable level of diagnostic accuracy (AUC = 0.78–0.92) for discriminating all TB from those with other disease and latent TB infection in human immunodeficiency virus-negative TB suspects. Two of these assays may be useful in the IGRA-positive population and can provide high positive predictive value. None of the new tests for TB can be considered cost-effective. The diagnostic performance of new tests among the HIV-positive population was either underpowered or not sufficiently achieved in each substudy. Overall, the diagnostic performance of all previously identified ‘signatures’ of TB was lower than previously reported. This probably reflects the nature of the cohort we used, which includes the harder to diagnose groups, such as culture-unconfirmed TB or EPTB, which were under-represented in previous cohorts. We are yet to achieve our secondary objective of deriving novel signatures of TB using our data sets. This was beyond the scope of this report. We recommend that future studies using these technologies target specific subtypes of TB, specifically those groups for which new diagnostic tests are required. This project was funded by the Efficacy and Mechanism Evaluation (EME) programme, a MRC and NIHR partnership.
Publisher: American Chemical Society (ACS)
Date: 22-04-2019
Publisher: MDPI AG
Date: 19-10-2022
DOI: 10.3390/PH15101282
Abstract: Advancements in the material design of smart hydrogels have transformed the way therapeutic agents are encapsulated and released in biological environments. On the other hand, the expeditious development of 3D printing technologies has revolutionized the fabrication of hydrogel systems for biomedical applications. By combining these two aspects, 4D printing (i.e., 3D printing of smart hydrogels) has emerged as a new promising platform for the development of novel controlled drug delivery systems that can adapt and mimic natural physio-mechanical changes over time. This allows printed objects to transform from static to dynamic in response to various physiological and chemical interactions, meeting the needs of the healthcare industry. In this review, we provide an overview of innovation in material design for smart hydrogel systems, current technical approaches toward 4D printing, and emerging 4D printed novel structures for drug delivery applications. Finally, we discuss the existing challenges in 4D printing hydrogels for drug delivery and their prospects.
Publisher: American Association for the Advancement of Science (AAAS)
Date: 21-12-2022
Abstract: The consequences of crowding on the dynamic conformational ensembles of intrinsically disordered proteins (IDPs) remain unresolved because of their ultrafast motion. Here, we report crowder-induced interactions and conformational dynamics of a prototypical multistimuli-responsive IDP, Rec1-resilin. The effects of a range of crowders of varying sizes, forms, topologies, and concentrations were examined using spectroscopic, spectrofluorimetric, and contrast-matching small- and ultrasmall-angle neutron scattering investigation. To achieve sufficient neutron contrast against the crowders, deuterium-labeled Rec1-resilin was biosynthesized successfully. Moreover, the ab initio “shape reconstruction” approach was used to obtain three-dimensional models of the conformational assemblies. The IDP revealed crowder-specific systematic extension and compaction with the level of macromolecular crowding. Last, a robust extension-contraction model has been postulated to capture the fundamental phenomena governing the observed behavior of IDPs. The study provides insights and fresh perspectives for understanding the interactions and structural dynamics of IDPs in crowded states.
Publisher: Royal Society of Chemistry (RSC)
Date: 2020
DOI: 10.1039/D0RA03964K
Abstract: Silk biomaterials in different forms such as particles, coatings and their assemblies, represent unique type of materials in multiple scales and dimensions.
Publisher: American Chemical Society (ACS)
Date: 26-11-2018
Abstract: Aqueous dispersions of poly(3-hexylthiophene):phenyl-C61-butyric acid methyl ester (P3HT:PCBM) nanoparticles (NPs) have been fabricated using a thiophene-based surfactant 2-(3-thienyl)ethyloxybutylsulfonate sodium salt (TEBS) for the first time via the mini-emulsion process. The use of TEBS resulted in a stable colloidal dispersion of P3HT:PCBM NPs, of which the effect of various fabrication parameters is investigated. The fabricated NPs were characterized by dynamic light scattering, scanning electron microscopy, UV-visible spectroscopy, contrast-variation small and ultra-small angle neutron scattering, and cyclic voltammetry. The internal structure and electrochemical performance of TEBS-stabilized P3HT:PCBM NPs were compared to those of sodium dodecyl sulfate-stabilized core-shell (PCBM-P3HT) NPs at the same surfactant concentration. Neutron scattering and cyclic voltammetry results reveal a homogeneous distribution of small de-mixed P3HT and PCBM domains in the internal structure of TEBS-stabilized P3HT:PCBM NPs, reminiscent of cast film. Moreover, electron microscopy images show evidence of diffused NP surface/interface upon drying (without annealing), which indicates that the thiophene-containing TEBS may improve compatibility and film-forming properties of fabricated P3HT:PCBM NPs, and consequently be more suited for conventional film-processing methods for organic solar cell applications.
Location: United Kingdom of Great Britain and Northern Ireland
Location: United Kingdom of Great Britain and Northern Ireland
Location: United Kingdom of Great Britain and Northern Ireland
No related grants have been discovered for Naba Dutta.