ORCID Profile
0000-0002-4150-2600
Current Organisations
RMIT University
,
Goa University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: MDPI AG
Date: 06-09-2018
DOI: 10.3390/C4030050
Abstract: Graphene has been demonstrated to be one of the most promising candidates to use as filler to improve the electrical, thermal, chemical and mechanical properties of natural rubber due to exceptional high surface area, superior electrical and thermal conductivity, and remarkable gas impermeability resistance. In this study, graphene nanoplates (GNPs) were mass-produced by a one-step chemical exfoliation of natural graphite and used as a filler for the fabrication of GNPs@natural rubber composite by a simple mixing method. The resultant GNPs/rubber composite was characterized by using scanning electron microscopy (SEM), and a rheometer. The prepared graphene nanoplates had a thickness of less than 10 nm and a lateral size of tens of microns. The GNPs@rubber composite revealed an exceptional improvement of abrasion loss up to seven to ten fold, along with an approximately 400%, 200% and 30% increment of elongation at break, tear strength and tensile strength, respectively. Other mechanical properties, such as hardness, compression set and rebound, as well as the effect of the GNPs loadings on the mechanical properties of the composite, were also investigated in detail.
Publisher: MDPI AG
Date: 27-12-2021
DOI: 10.3390/MOLECULES27010150
Abstract: The emergence and development of aggregation induced emission (AIE) have attracted worldwide attention due to its unique photophysical phenomenon and for removing the obstacle of aggregation-caused quenching (ACQ) which is the most detrimental process thereby making AIE an important and promising aspect in various fields of fluorescent material, sensing, bioimaging, optoelectronics, drug delivery system, and theranostics. In this review, we have discussed insights and explored recent advances that are being made in AIE active materials and their application in sensing, biological cell imaging, and drug delivery systems, and, furthermore, we explored AIE active fluorescent material as a building block in supramolecular chemistry. Herein, we focus on various AIE active molecules such as tetraphenylethylene, AIE-active polymer, quantum dots, AIE active metal-organic framework and triphenylamine, not only in terms of their synthetic routes but also we outline their applications. Finally, we summarize our view of the construction and application of AIE-active molecules, which thus inspiring young researchers to explore new ideas, innovations, and develop the field of supramolecular chemistry in years to come.
Publisher: Elsevier BV
Date: 03-2019
Publisher: Elsevier BV
Date: 04-2021
Publisher: Wiley
Date: 10-05-2021
Abstract: Asymmetrical and symmetrical push‐pull chromophore‐based on triphenylamine (TPA) donors and naphthalenediimide (NDI) acceptors are designed and successfully synthesized via [2+2] cycloaddition‐retroelectrocyclization (CA‐RE) reaction with well‐known electron‐accepting tetracyanoethylene (TCNE) and 7,7,8,8, ‐tetracyanoquinodimethane (TCNQ) groups. The novel series of compounds NDI‐TPA‐1 to NDI‐TPA‐6 were characterized to identify the influence of the TCNE and TCNQ π‐conjugated linkers on the optical, electrochemical, and electronic properties of these molecules. We found that in dichloromethane the NDI‐TPAs 1, 4, 5 , and 6 display absorbance peaks at increasing wavelengths 605, 641, 646, and 645 nm, respectively. We demonstrated that through simple chemical modification we could drop the lowest occupied molecular orbital of NDI‐TPA‐1 to 6 . Furthermore, NDI‐TPA‐1 to 6 were integrated into organic thin‐film transistors (OTFTs) via spin‐coating technique, and charge transfer properties were investigated. We found that the choice of the functional group led to either p‐type, n‐type, or ambipolar characteristics.
Publisher: MDPI AG
Date: 18-11-2019
DOI: 10.3390/MOLECULES24224172
Abstract: The fabrication of controlled supramolecular nanostructures via self-assembly of protoporphyrin IX (PPIX) was studied with enantiomerically pure l-arginine and d-arginine, and we have shown that stoichiometry controlled the morphology formed. The nanostructure morphology was mainly influenced by the delicate balance of π-π stacking interactions between PPIX cores, as well as H-bonding between the deprotonated acidic head group of PPIX with the guanidine head group of arginine. PPIX self-assembled with l-/d-arginine to create rose-like nanoflower structures for four equivalents of arginine that were 5–10 μm in length and 1–4 μm diameter. We employed UV-vis, fluorescence spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), dynamic light scattering (DLS) and Fourier transform infrared spectroscopy (FT-IR) techniques to characterize the resulting self-assembled nanostructures. Furthermore, we investigated the catalytic activity of PPIX and arginine co-assembled materials. The fabricated PPIX–arginine nanostructure showed high enhancement of photocatalytic activity through degradation of rhodamine B (RhB) with a decrease in dye concentration of around 78–80% under simulated visible radiation.
Publisher: MDPI AG
Date: 04-2019
DOI: 10.3390/IJMS20071621
Abstract: donor–acceptorDonor–acceptor–π–acceptor–donor (D1-A1-π-A2/A3-D2)-type small molecules, such TPA-MC-2 and TPA-MC-3, were designed and synthesized starting from donor-substituted alkynes (TPA-MC-1) via [2 + 2] cycloaddition−retroelectrocyclization reaction with tetracyanoethylene (TCNE) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) units, respectively. TPA-MC-2 and TPA-MC-3 chromophores differ on the A2/A3 acceptor subunit, which is 1,1,4,4-tetracyanobutadiene (TCBD) and a dicyanoquinodicyanomethane (DCQDCM), respectively. Both the derivative bearing same donors D1 (triphenylamine) and D2 (trimethylindolinm) and also same A1 (monocyano) as an acceptor, tetracyano with an aryl rings as the π-bridging moiety. The incorporation of TCNE and TCNQ as strong electron withdrawing units led to strong intramolecular charge-transfer (ICT) interactions, resulting in lower LUMO energy levels. Comparative UV–Vis absorption, fluorescence emission, and electrochemical and computational studies were performed to understand the effects of the TCNE and TCNQ subunits incorporated on TPA-MC-2 and TPA-MC-3, respectively.
Publisher: Royal Society of Chemistry (RSC)
Date: 2022
DOI: 10.1039/D2AY01040B
Abstract: The first-ever neomycin antibiotic-based carbon dots (Neo-CDs) were synthesized
Publisher: MDPI AG
Date: 14-08-2019
DOI: 10.3390/CHEMOSENSORS7030038
Abstract: Although chemical structural modification of naphthalimides is widely employed for the purpose of sensing explosives, the effects of such modification have been little explored. Herein, we report the design and synthesis of a new naphthalimide-benzothiazole conjugate (1) and its ability to sense various nitrophenols by means of its colorimetric and fluorescent characteristics. Under long-range UV light (365 nm), 1 displayed a color change of its solution from bluish to colorless only upon addition of 2,4,6-trinitrophenol (TNP). Photoluminescence spectroscopy showed quantitative fluorescence quenching by TNP of the emission peaks of 1 at 398 nm and 418 nm due to donor–acceptor electron transfer. The interaction of 1 with TNP was via a cooperative, non-covalent hydrogen-bonding interaction. Receptor 1 exhibited high sensitivity and selectivity towards TNP over various aromatic nitro analytes. The binding constant (K) and Stern–Volmer constant (Ksv) between 1 and TNP were found to be 5.332 × 10−5 M and 2.271 × 106 M−1, respectively. Furthermore, the limit of detection was calculated and found to be as low as 1.613 × 10−10 M.
Publisher: Royal Society of Chemistry (RSC)
Date: 2020
DOI: 10.1039/C9NJ05137F
Abstract: Herein, we report the design, synthesis and self-assembly of two naphthalene diimide hiphiles NDI-TA1 and NDI-TA2 bearing acylated and deacylated hydroxyl groups of tartaric acid, respectively.
Publisher: MDPI AG
Date: 12-10-2018
DOI: 10.3390/S18103433
Abstract: Quinoxaline-based novel acid-responsive probe Q1 was designed on the basis of a conjugated donor-acceptor (D-A) subunit. Q1 shows colorimetric and fluorometric changes through protonation and deprotonation in dichloromethane. With the addition of the trifluoroacetic acid (TFA), UV-vis absorption spectral changes in peak intensity of Q1 was observed. Moreover, the appearance of a new peaks at 284 nm 434 nm in absorption spectra with the addition of TFA indicating protonation of quinoxaline nitrogen and form Q1.H+ and Q1.2H+. The emission spectra display appearance of new emission peak at 515 nm. The optical property variations were supported by time resolved fluorescence studies. The energy band gap was calculated by employing cyclic voltammetry and density functional calculations. Upon addition of triethylamine (TEA) the fluorescence emission spectral changes of Q1 are found to be reversible. Q1 shows color changes from blue to green in basic and acidic medium, respectively. The paper strip test was developed for making Q1 a colorimetric and fluorometric indicator.
No related grants have been discovered for Sheshanath Bhosale.