ORCID Profile
0000-0002-8994-0888
Current Organisations
Monash University
,
University of Tasmania
,
Joule Logic
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: MDPI AG
Date: 28-08-2022
DOI: 10.3390/EN15176282
Abstract: Over many decades, isolated regions (e.g., islands, rural and remote areas) have heavily relied on diesel engine for producing power and energy. However, due to depleting fossil fuels and concerning emissions, biodiesels could be the substitute for diesel in power generation sectors. This study developed a single-zone thermodynamic model to predict the engine performances such as brake power (BP), torque, brake thermal efficiency (BTE), brake-specific fuel consumption (BSFC) and ignition delay (ID) times for diesel and jojoba biodiesel. The experiments were conducted on a fully automated, 4-cylinder, 4-stroke, liquid-cooled direct injection 3.7-L diesel engine fueled with diesel (D100) and three jojoba blends (JB5, JB10, and JB20) to validate the model. The performance simulation results agreed with experimental data for all tested fuels at 1200 to 2400 rpm speed and 25%, 50%, 75%, and 100% loading operation. The minimum error (3.7%) was observed for BP for D100 at 2000 rpm and 100% load, and the maximum error (19.2%) was found for JB10 at 1200 rpm and 25% loading operation. As load increases from 25 to 100%, the BSFC and torque difference between diesel and JB20 decreases from 10 to 6.5 and 9 to 6%, respectively. A shorter ID time was observed in JB5 compared to JB10 and JB20. Furthermore, a significant reduction was observed in CO (7.55%) and HC (6.65%) emission for JB20 at 25% and 1200 rpm compared to diesel fuel however, NOx emission was increased up to 10.25% under any given conditions.
Publisher: MDPI AG
Date: 05-08-2020
DOI: 10.3390/EN13164053
Abstract: Isolated communities are progressively integrating renewable generation to reduce the societal, economic and ecological cost of diesel generation. Unfortunately, as renewable penetration and load variability increase, systems require greater diesel generation reserves, constraining renewable utilisation. Improved diesel generator flexibility can reduce the requirement for diesel reserves, allowing increased renewable hosting. Regrettably, it is uncommon for utilities to modify diesel generator control during the integration of renewable source generation. Identifying diesel generator flexibility and co-ordination as an essential component to optimising system hosting capacity, this paper investigates improved diesel generator flexibility and coordination via low-load diesel application. Case study comparisons for both high- and low-penetration hybrid diesel power systems are presented in King Island, Australia, and Moloka`i, Hawai`i, respectively. For King Island, the approach details a 50% reduction in storage requirement, while for Moloka`i the application supports a 27% increase in renewable hosting capacity.
Publisher: Elsevier BV
Date: 02-2022
Publisher: MDPI AG
Date: 27-04-2018
DOI: 10.3390/EN11051080
Publisher: Elsevier BV
Date: 10-2021
Publisher: Elsevier BV
Date: 02-2019
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 09-2020
Start Date: 2015
End Date: 2018
Funder: U.S. Department of Defense
View Funded Activity